Italy
Germany
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
Gys
Reference: 059153
€56.87
47,00 € tax excl.
Fast delivery
2-year warranty
PORTABLE INSPECTION LAMP 400L
GYS Welder - GYS Welding Machine Catalogue France: MMA, TIG, MIG, MAG
By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.
Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.
View my favorites
View as
Supplier stock
Gys
Reference: 056329
€30.25
25,00 € tax excl.
Fast delivery
2-year warranty
JUMP START CABLES 320A - 16MM2 - 3M
Supplier stock
Gys
Reference: 082816
€713.90
590,00 € tax excl.
or 4 x 178,48 €
Free delivery
2-year warranty
STARTRONIC SUPERCAP 12/24V
Supplier stock
Gys
Reference: 026117
€350.90
290,00 € tax excl.
or 4 x 87,73 €
Free delivery
2-year warranty
STARTRONIC HYBRID 950
Supplier stock
Gys
Reference: 085206
€1,488.30
1 230,00 € tax excl.
or 4 x 372,08 €
Free delivery
2-year warranty
POWER PACK 14.22
Supplier stock
Gys
Reference: 027961
€605.00
500,00 € tax excl.
or 4 x 151,25 €
Free delivery
2-year warranty
POWER PACK 520
Supplier stock
Gys
Reference: 025844
€484.00
400,00 € tax excl.
or 4 x 121,00 €
Free delivery
2-year warranty
GYSPACK HERITAGE 6/12V
Supplier stock
Gys
Reference: 027862
€338.80
280,00 € tax excl.
or 4 x 84,70 €
Free delivery
2-year warranty
GYSPACK 660
Supplier stock
Gys
Reference: 026322
€217.80
180,00 € tax excl.
or 3 x 72,60 €
Free delivery
2-year warranty
GYSPACK AIR
Supplier stock
Gys
Reference: 026469
€520.30
430,00 € tax excl.
or 4 x 130,08 €
Free delivery
2-year warranty
STARTIUM 330E - 12/14V
Supplier stock
Gys
Reference: 026049
€272.25
225,00 € tax excl.
or 3 x 90,75 €
Free delivery
2-year warranty
GYSFLASH 20.12/24 PL
Supplier stock
Gys
Reference: 026926
€226.27
187,00 € tax excl.
or 3 x 75,42 €
Free delivery
2-year warranty
GYSFLASH 18.12 PL
Supplier stock
Gys
Reference: 029460
€105.27
87,00 € tax excl.
Fast delivery
2-year warranty
GYSFLASH 6.24
Supplier stock
Gys
Reference: 026902
€61.71
51,00 € tax excl.
Fast delivery
2-year warranty
GYSFLASH 1.12 PL
Supplier stock
Gys
Reference: 023253
€72.60
60,00 € tax excl.
Fast delivery
2-year warranty
TCB 60 Charger - 12V
In stock
Gys
Reference: 082328
€9.62
7,95 € tax excl.
Fast delivery
2-year warranty
Pack of 10 Stainless Steel 308L electrodes - D2.5 mm - L 300mm
Welds stainless steel 308L
Electrode diameter: 2.5 mm
Weldable thickness: 2.5 mm
Welding power to set: 40 - 80A
Multiple positions (except downhill)
Clean, attractive weld bead
Good slag detachment
Connect the electrode holder to the + terminal of the machine
Arc striking from 60V
Classification:
EN 14343-A : W 19 9 L
AWS 5.9: ER308L
In stock
Gys
Reference: 066748BLIS
€6.30
5,21 € tax excl.
Fast delivery
2-year warranty
Welds steel assemblies (carbon and carbon-manganese steel)
Length: 350mm
Electrode diameter: 4 mm
Material thickness to weld: over 8 mm
Welding power setting: 150A (130 to 190A)
Easy to use for striking and re-striking
Multiple positions
Strike voltage: 70V DC
Connect the electrode holder to the + terminal of the welder for root pass
Connect the electrode holder to the - terminal of the welder for fill pass
Classification:
EN ISO: 2560-A
AWS A 5.1: E 7018-1
DIN 1913: E 42 4 B 4 2 H5
In stock
Gys
Reference: 066731BLIS
€5.54
4,58 € tax excl.
Fast delivery
2-year warranty
Welds steel assemblies (carbon and carbon-manganese)
Length: 350mm
Electrode diameter: 3.2 mm
Welding thickness: 5 to 8 mm
Welding power setting: 110Amp (90 to 140A)
Easy arc striking and re-striking
Multiple positions
Arc striking voltage: 70V DC
Connect the electrode holder to the + of the unit for root pass
Connect the electrode holder to the - of the unit for fill pass
Classification:
EN ISO: 2560-A
AWS A 5.1: E 7018-1
DIN 1913: E 42 4 B 4 2 H5
In stock
Gys
Reference: 066724BLIS
€5.40
4,46 € tax excl.
Fast delivery
2-year warranty
Welds steel assemblies (carbon and carbon-manganese)
Length: 350mm
Electrode diameter: 2.5 mm
Welding thickness: 2.5 to 6 mm
Welding power setting: 80Amp (60 to 110A)
Easy arc striking and re-striking
Multiple positions
Striking voltage: 70V DC
Connect the electrode holder to the + of the machine for root pass
Connect the electrode holder to the - of the machine for fill pass
Classification:
EN ISO : 2560-A
AWS A 5.1: E 7018-1
DIN 1913: E 42 4 B 4 2 H5
In stock
Gys
Reference: 066717BLIS
€5.54
4,58 € tax excl.
Fast delivery
2-year warranty
Welds steel assemblies (carbon and carbon-manganese)
Length: 300mm
Electrode diameter: 2 mm
Weldable thickness: 1.5 to 3 mm
Welding power setting: 45A (20 to 50A)
Easy to strike and re-strike
Multiple positions
Ignition voltage: 70V DC
Connect the electrode holder to the + terminal for root pass
Connect the electrode holder to the - terminal for fill pass
Classification:
EN ISO: 2560-A
AWS A 5.1: E 7018-1
DIN 1913: E 42 4 B 4 2 H5
In stock
Gys
Reference: 084452BLIS
(1 review)
€16.03
13,25 € tax excl.
Fast delivery
2-year warranty
Welds steel
Length: 350mm
Electrode diameter: 4 mm
Thickness to weld: over 8 mm
Welding power setting: 150-160 Amp
Easy to use for striking and re-striking
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - of the welder
Classification:
AWS A 5.1: E6013
EN ISO 2560-A: E 420 RC 11
In stock
Gys
Reference: 084353BLIS
€3.98
3,29 € tax excl.
Fast delivery
2-year warranty
Welds steel
Length: 350mm
Electrode diameter: 4 mm
Weldable thickness: over 8 mm
Welding power setting: 150-160 Amp
Easy arc striking and re-striking
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - terminal of the machine
Classification:
AWS A 5.1: E6013
EN ISO 2560-A: E 420 RC 11
In stock
Gys
Reference: 084445BLIS
(1 review)
€11.05
9,13 € tax excl.
Fast delivery
2-year warranty
Welds steel
Length: 350 mm
Electrode diameter: 3.2 mm
Thickness to weld: 5 to 8 mm
Welding power setting: 115 A
Easy to strike and re-strike
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - terminal of the welder
Classification:
AWS A 5.1: E6013
EN ISO 2560-A: E 420 RC 11
In stock
Gys
Reference: 084346BLIS
€3.98
3,29 € tax excl.
Fast delivery
2-year warranty
Welds steel
Length: 350mm
Electrode diameter: 3.2 mm
Welding thickness: 5 to 8 mm
Welding power setting: 115A
Easy to use for striking and re-striking
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - terminal of the welder
Classification:
AWS A 5.1: E6013
EN ISO 2560-A: E 420 RC 11
In stock
Gys
Reference: 084438BLIS
€8.57
7,08 € tax excl.
Fast delivery
2-year warranty
Welds steel
Length: 350mm
Electrode diameter: 2.5 mm
Thickness to weld: 2.5 to 6 mm
Welding power setting: 80Amp
Easy to use for striking and re-striking
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - terminal of the welder
Classification:
AWS A 5.1 : E6013
EN ISO 2560-A : E 420 RC 11
In stock
Gys
Reference: 084339BLIS
€3.42
2,83 € tax excl.
Fast delivery
2-year warranty
Welds steel
Length: 350mm
Electrode diameter: 2.5 mm
Welding thickness: 2.5 to 6 mm
Welding power adjustment: 80A
Easy to strike and re-strike
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - terminal of the welder
Classification:
AWS A 5.1 : E6013
EN ISO 2560-A : E 420 RC 11
In stock
Gys
Reference: 084421BLIS
(1 review)
€7.31
6,04 € tax excl.
Fast delivery
2-year warranty
Welds steel
Length: 350mm
Electrode diameter: 2 mm
Welding thickness: 1.5 to 3 mm
Welding power setting: 55Amp
Easy to use for striking and re-striking
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - terminal of the welder
Classification:
AWS A 5.1: E6013
EN ISO 2560-A: E 420 RC 11
In stock
Gys
Reference: 084322BLIS
€3.98
3,29 € tax excl.
Fast delivery
2-year warranty
Welds steel
Length: 350mm
Electrode diameter: 2 mm
Thickness to weld: 1.5 to 3 mm
Welding power setting: 55A
Easy to use for striking and re-striking
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - terminal of the machine
Classification:
AWS A 5.1: E6013
EN ISO 2560-A: E 420 RC 11
In stock
Gys
Reference: 084414BLIS
(1 review)
€9.03
7,46 € tax excl.
Fast delivery
2-year warranty
Welds steel
Length: 300mm
Electrode diameter: 1.6 mm
Weldable thickness: 1.5 mm
Welding power setting: 40Amp
Easy to use for striking and re-striking
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - terminal of the machine
Classification:
AWS A 5.1 : E6013
EN ISO 2560-A : E 420 RC 11
In stock
Gys
Reference: 084315BLIS
€4.54
3,75 € tax excl.
Fast delivery
2-year warranty
Welds steel
Length: 300mm
Electrode diameter: 1.6 mm
Welding thickness: 1.5 mm
Welding power setting: 40A
Easy to strike and re-strike
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - terminal of the welding machine
Classification:
AWS A 5.1: E6013
EN ISO 2560-A: E 420 RC 11
In stock
Gys
Reference: 081468
€48.40
40,00 € tax excl.
Fast delivery
2-year warranty
Ideal for difficult-to-weld steels
Operating temperature of 1000°C
Electrode diameter: 3.2 mm
Thickness to weld: 3.2 mm
Welding power to set: 40 - 80 Amp
Length 300 mm
All-position use
Connect the electrode holder to the + of the welder
Arc starting from 50V
Classification:
EN ISO 3581-A: E 29 9 R
AWS 5.4: E 312-16
In stock
Gys
Reference: 081475
€49.40
40,83 € tax excl.
Fast delivery
2-year warranty
Ideal for steels with difficult weldability
Operating temperature of 1000°C
Electrode diameter: 2.5 mm
Weldable thickness: 2.5 mm
Welding power setting: 40 - 80 Amp
Length 300 mm
All-position use
Connect the electrode holder to the + terminal of the machine
Arc striking from 50V
Classification:
EN ISO 3581-A : E 29 9 R
AWS 5.4: E 312-16
In stock
Gys
Reference: 073692BLIS
€9.83
8,12 € tax excl.
Fast delivery
2-year warranty
Pack of 14 Stainless Steel 308L electrodes - D2.0 mm - L 300mm
Welds stainless steel 308L
Electrode diameter: 2 mm
Thickness to weld: 2 mm
Welding power to set: 40 - 80A
Multiple positions (except downward)
Clean bead appearance
Good slag detachment
Connect the electrode holder to the + of the machine
Arc striking from 60V
Classification:
EN 14343-A : W 19 9 L
AWS 5.9: ER308L
In stock
Gys
Reference: 081482BLIS
€39.33
32,50 € tax excl.
Fast delivery
2-year warranty
Pack of 25 Stainless Steel 316L Electrodes - D3.2 mm - L 300mm
Welds stainless steel 316L/308L/304L
Electrode diameter: 3.2 mm
Thickness to weld: 3.2 mm
Welding power setting: 40 to 80 Amp
Multiple positions (except downward)
Fine appearance bead
Good slag detachment
Connect the electrode holder to the + of the machine
Arc starting from 50V
Classification:
EN 1600 : 19123 LR12
AWS 5.4: E 316L-16
In stock
Gys
Reference: 082342BLIS
€12.05
9,96 € tax excl.
Fast delivery
2-year warranty
Pack of 8 Stainless Steel 316L Electrodes - D3.2 mm - L 300mm
Welds stainless steel 316L/308L/304L
Electrode diameter: 3.2 mm
Thickness to weld: 3.2 mm
Welding power setting: 40 to 80 Amp
Multiple positions (except downward)
Good-looking bead
Good slag detachment
Connect the electrode holder to the + of the welder
Arc striking from 50V
Classification:
EN 1600 : 19123 LR12
AWS 5.4: E 316L-16
In stock
Gys
Reference: 081499BLIS
€24.20
20,00 € tax excl.
Fast delivery
2-year warranty
Pack of 30 stainless steel 316L electrodes - D2.5 mm - L 300mm
Welds stainless steel 316L/308L/304L
Electrode diameter: 2.5 mm
Welding thickness: 2.5 mm
Welding power setting: 40 to 80 Amp
Multiple positions (except downward)
Fine-looking bead
Good slag release
Connect the electrode holder to the + terminal of the welder
Arc striking from 50V
Classification:
EN 1600: 19123 LR12
AWS 5.4: E 316L-16
In stock
Gys
Reference: 082335BLIS
(1 review)
€8.98
7,42 € tax excl.
Fast delivery
2-year warranty
Pack of 10 Stainless Steel 316L Electrodes - D2.5 mm - L 300mm
Welds stainless steel 316L/308L/304L
Electrode diameter: 2.5 mm
Thickness to weld: 2.5 mm
Welding power setting: 40 to 80 Amp
Multiple positions (except downward)
Fine bead appearance
Good slag detachment
Connect the electrode holder to the + of the welder
Arc striking from 50V
Classification:
EN 1600 : 19123 LR12
AWS 5.4: E 316L-16
In stock
Gys
Reference: 073708
€7.56
6,25 € tax excl.
Fast delivery
2-year warranty
Aluminum electrodes - D 2.5 mm - L 350 mm
Welds aluminum parts and alloys
5% silicon content
Electrode diameter: 2.5 mm
Weldable thickness: 2.5 mm
Welding power setting: 90 Amp
Ideal for the automotive, marine, chemical industries…
Connect the electrode holder to the + terminal of the machine
Arc striking from 60V
In stock
Gys
Reference: 083349BLIS
€30.20
24,96 € tax excl.
Fast delivery
2-year warranty
Cast Iron Electrodes X9 - L 350mm
Welds cast iron, nodular cast iron and assembly with steel
Electrode diameter: 3.2
Welding thickness: 3.2
Welding power setting: 50 to 90 Amp
Very resistant to cracking
Ideal for repairing casings, engine blocks, casting defects...
Connect the electrode holder to the + terminal of the welder
Arc striking from 40V
Classification:
AWS 5.15 : E Ni Fe CI
EN ISO 1071 : EC NiFe-CI3
DIN 8573 : E Ni Fe BG 13
In stock
Gys
Reference: 083332BLIS
€27.18
22,46 € tax excl.
Fast delivery
2-year warranty
Cast Iron Electrodes X12 - L 350mm
Welds cast iron, ductile iron and assemblies with steel
Electrode diameter: 2.5
Thickness to weld: 2.5
Welding power setting: 50 to 90 Amp
Highly resistant to cracking
Ideal for repairing crankcases, engine blocks, casting defects...
Connect the electrode holder to the + terminal of the machine
Arc striking from 40V
Classification:
AWS 5.15 : E Ni Fe CI
EN ISO 1071 : EC NiFe-CI3
DIN 8573 : E Ni Fe BG 13
Supplier stock
Gys
Reference: 081109
€3,152.18
2 605,11 € tax excl.
or 4 x 788,05 €
Free delivery
2-year warranty
The CUTTER 105 CT is a high-performance plasma cutter, lightweight (29 kg) and powerful (105 A), designed for intensive use in the workshop and on site. It offers a cutting capacity of up to 50 mm thickness on steel and features 5 operating modes: cutting solid sheets, perforated sheets, and gouging.
Key performance
-
High duty cycle: 105 A at 60%, for maximum productivity.
-
Cuts all types of metals (mild steel, stainless steel, hardened steel, HLE, aluminum, copper).
-
Concentrated arc for a clean cut with minimal slag.
Suitable for harsh environments
-
Optimized cooling with electronic dust protection.
-
Reinforced housing, anti-shock pads, IP23 protection for outdoor use.
-
Compatible with generator (30 kW recommended).
-
Transportable by a single person.
Ease of use
-
5 cutting modes with locked trigger options.
-
Manual air pressure adjustment with front panel indicator.
-
Air filter with automatic purge to protect the torch.
-
HF-free ignition, avoiding electronic interference.
-
Integrated compartment for consumables.
-
Optional analog CNC kit for cutting tables.
-
Simple software update via USB-B port.
Premium torch
-
Compatible with many torch models (different lengths, angles, etc.).
-
Wide range of consumables suitable for all thicknesses.
-
Designed to withstand shocks and heat.
-
Quick connect/disconnect without tools, making transport and maintenance easier.
-
Safety mechanism on the trigger to prevent accidental arc activation.
Supplier stock
Gys
Reference: 081093
€3,623.95
2 995,00 € tax excl.
or 4 x 905,99 €
Free delivery
2-year warranty
The CUTTER 105 CT is a high-performance plasma cutter, lightweight (29 kg) and powerful (105 A), designed for intensive use both in the workshop and on site. It provides a cutting capacity of up to 50 mm thickness on steel and offers 5 operating modes: cutting solid sheets, perforated sheets and gouging.
Key performance
-
High duty cycle: 105 A at 60%, for maximum productivity.
-
Cuts all types of metals (mild steel, stainless steel, hardened steel, HLE, aluminium, copper).
-
Concentrated arc for a clean cut with minimal slag.
Suited for harsh environments
-
Optimised cooling with electronic dust protection.
-
Reinforced casing, anti-shock feet, IP23 protection for outdoor use.
-
Compatible with generator (30 kW recommended).
-
Can be transported by a single person.
Ease of use
-
5 cutting modes with locked trigger options.
-
Manual air pressure adjustment with front panel indicator.
-
Air filter with automatic purge to protect the torch.
-
HF-free ignition, avoiding electronic interference.
-
Integrated consumables compartment.
-
Optional analogue CNC kit for cutting tables.
-
Easy software update via USB-B port.
In stock
Gys
Reference: 013858
€954.94
789,21 € tax excl.
or 4 x 238,74 €
Free delivery
2-year warranty
The EASYCUT 30 FV is a 30 A plasma cutter capable of cutting steel up to 10 mm (15 mm separation cut). Its HF-free ignition extends consumable life and protects surrounding electronic equipment. Ideal for maintenance and bodywork, it combines robustness with ease of use.
Thanks to inverter technology, it delivers quality cutting on mild steel, stainless steel, hardened steel, HSLA, aluminium and copper. The interface is clear with manual adjustment of current and air pressure via a front-panel flow meter.
The ergonomic 4 m air-cooled torch is designed for safe, stable and shock-resistant use. It is easily disconnectable for easy transport.
Equipped with Flexible Voltage technology (85–265V) and PFC, it adapts to all single-phase voltages and optimises power consumption with up to 30% energy savings. Its reinforced casing, anti-slip feet and compact format make it a reliable and portable tool for all environments.
Save 10%
In stock
Gys
Reference: 065543
(2 reviews)
€625.17
€694.64
516,67 € tax excl.
or 4 x 156,29 €
Free delivery
2-year warranty
The EASYCUT 25 plasma cutter is an ideal solution for precise cutting of all types of metals up to 8 mm thick. Ultra-lightweight (7.8 kg) and easy to transport, it delivers excellent performance without compromising on quality.
Equipped with inverter technology, it ensures clean cutting on steel (mild, stainless, hardened, HSLA), aluminum, copper, and more. Its HF-free ignition protects nearby electronic equipment, while its ergonomic torch, resistant to shocks and heat, ensures comfort and stability.
Easy to use, the EASYCUT 25 features an intuitive control ring, manual air pressure adjustment (2.5 to 6.5 bar) with a bargraph, as well as automatic torch detection. Its robust design with reinforced body and disconnectable components makes it a reliable and durable tool, ideal for workshops and bodywork applications.
Save 10%
In stock
Gys
Reference: 068063
€902.45
€1,002.73
745,83 € tax excl.
or 4 x 225,61 €
Free delivery
2-year warranty
The EASYCUT K25 is a high-performance plasma cutter capable of cutting all types of metals up to 8 mm thick, thanks to its integrated air compressor, ideal for outdoor work without a compressed air source. It guarantees precise cuts without distortion, even on painted structures (steel, stainless steel, cast iron up to 8 mm; aluminum and copper up to 6 mm).
Equipped with the HF-free "Arc Pilot" ignition system, it avoids electromagnetic interference. Its secured TPT25 torch (4 m) prevents accidental triggering and disconnects easily for transport. The unit benefits from enhanced protection against overvoltages and is compatible with generators, while offering a controlled noise level (60–70 dB).
Save 10%
In stock
Gys
Reference: 083622
€136.13
€151.25
112,50 € tax excl.
Free delivery
2-year warranty
Ideal for getting started with MMA welding
Duty cycle: 50A at 60% and 35A at 100%
Current range: 10 to 100A
Welds steel, cast iron and stainless steel up to 5mm thick
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 2.5 mm
Technologies: Hot Start, Arc Force, Antisticking
Power supply: 230 Volts 50/60 Hz - 16A -
Open circuit voltage: 63 V
Featherlight: 2kg - 2-year warranty
Supplied with:
1x Cable with earth clamp (1.6 metres) 16mm2 (10/25 mm2 connector)
1x Cable with electrode holder (1.6 metres) 16mm2 (10/25 mm2 connector)
1x Shoulder strap
Save €80.00
Supplier stock
Gys
Reference: PGPT200ACDCA
€1,719.88
€1,799.88
1 421,38 € tax excl.
or 4 x 429,97 €
Free delivery
2-year warranty
This pack includes 3 products:
1 GYS PROTIG 200 AC DC TIG welder, HF arc start + 4 m torch and earth clamp 08742
1 refillable gas cylinder 2.3 m3 without contract SOL Indus pure argon.
1 Column regulator
By choosing this pack, you save €80 on purchase.
Supplier stock
Gys
Reference: PGPT161B
€1,168.65
965,83 € tax excl.
or 4 x 292,16 €
Free delivery
2-year warranty
This pack includes the 3 products below:
1 GYS PROTIG 161 DC TIG welder + SR17 DB torch 4 m length and earth clamp
1 refillable gas cylinder of 2.3 m3 without contract SOL Indus pure argon.
1 Column regulator
By choosing this pack, you save €80 on your purchase.
In stock
Gys
Reference: 076341
€398.30
329,17 € tax excl.
or 4 x 99,58 €
Free delivery
2-year warranty
GYS 2-in-1 cart: welding machine + gas cylinder up to 10 m³ on the same stand
Cart sold bare
Delivered unassembled
In stock
Gys
Reference: 080034
(1 review)
€340.82
281,67 € tax excl.
or 4 x 85,21 €
Free delivery
2-year warranty
GYS 2-in-1 cart: welding machine + gas cylinder up to 4M3 on the same support
Dimensions: H106cm x W50cm x D45cm
Cart sold bare
Delivered unassembled
In stock
Gys
Reference: 037618
(1 review)
€87.73
72,50 € tax excl.
Fast delivery
2-year warranty
Ohmic detection nozzle 20 / 70 A designed for use with the Plasma torch reference AT-70
Supplier stock
Gys
Reference: 080935
€186.55
154,17 € tax excl.
or 3 x 62,18 €
Free delivery
2-year warranty
Supplier stock
Gys
Reference: 081000
€1,955.15
1 615,83 € tax excl.
or 4 x 488,79 €
Free delivery
2-year warranty
The CAPATEK 66 FV is an industrial capacitor discharge stud welder with drawback, capable of welding studs from M3 to M8 in copper-coated steel, stainless steel, aluminum and brass onto thin sheet metal without marks or deformation. Its ergonomic and revolutionary gun with adjustable drawback and force ensures an ultra-fast welding rate. Its "FV" technology allows it to be used on all single-phase networks (85 to 265 V).
MAXIMUM PRODUCTIVITY
66 mF capacitor discharge.
Recharge time from 0 to 5 s.
Wide choice of studs, from M3 to M8.
Compatible stud length: 6 to 40 mm.
CONTACT GUN
Adjustable force from 25 to 100 N with cover to prevent accidental adjustments.
Independent tripod design with bayonet locking for better gun stability during welding and to facilitate mandrel installation
Trigger for easy control of the welding action.
LED lighting for the welding area. Unique on the market, several functions:
- Fast LED flash: error, machine under load.
- Slow LED flash: preset stud count reached.
INTUITIVE INTERFACE
Voltage adjustment from 50 V to 200 V.
Settings lock.
Stud counter with adjustable threshold (incremental or decremental).
INDUSTRIAL DESIGN
Protected against overvoltages up to 400 V (PROTEC 400)
Reinforced casing with anti-shock pads on all external faces
Easy welding polarity change via 35/50 bayonet connector
Delivered with two split earth clamps to prevent magnetic arc blow effects
Handle with integrated mains cable winder
Automatic standby mode
ON/OFF switch located at the rear of the machine
Active ventilation as needed
In stock
Gys
Reference: 061446
€50.37
41,63 € tax excl.
Fast delivery
2-year warranty
Magnetic protective cover
Dimensions: 105 x 58 cm
Save 10%
In stock
Gys
Reference: 078727
(3 reviews)
€791.54
€879.49
654,17 € tax excl.
or 4 x 197,89 €
Free delivery
2-year warranty
Multi-process welding machine for professionals
Welds steel, stainless steel and aluminum up to 3mm thick
MIG duty cycle: 110A@ 60%-40°C
MMA duty cycle: 100A@ 60%-40°C
Current range: 20 to 150A
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (solid wire Ø 0.6 to 0.8 mm)
- MIG/MAG without gas (flux-cored wire Ø 0.6 to 0.9 mm)
- MMA (electrode Ø 1.6 to 3.2 mm) with Anti-Sticking function
4-roll wire feeder for Ø 200 mm (5 kg) or Ø 300 mm (15 kg) spools
Removable MAG torch 150A 3m
Digital interface with very intuitive adjustment
Compatible with 8kVA generator
Single-phase power supply 230 V - 16 A
Dimensions: 53 x 28 x 45 cm - 16.5 kg
Delivered with:
1x 150A 3m torch
1x 2m 16mm² earth clamp
1x 2m 16mm² electrode holder
1 gas hose 1m + 2 hose clamps
1 contact tip wrench
1 contact tip 0.9 + nozzle for gasless wire
Save 20%
In stock
Gys
Reference: 080768
(2 reviews)
€1,406.77
€1,758.46
1 162,64 € tax excl.
or 4 x 351,69 €
Free delivery
2-year warranty
Thanks to its integrated compressor, the EASYCUT K35 PFC plasma cutter allows you to cut metal on any construction site where a single-phase power supply is available.
Its PFC technology allows it to operate from 195 V to 265 V and achieve quality cuts even on 100 m construction site extension cords.
Small, lightweight and easy to transport, it is capable of delivering 35 A of power to cut different types of metals up to 15 mm thick in separation cut.
Automatic air regulation adapted to the TPT 35 torch.
Cuts all steels (mild, stainless, hardened, HSLA), aluminum, copper, etc. and cutting speed higher than Oxy-fuel thermal cutting
Very practical on construction sites thanks to its integrated compressor.
Internal air filter with automatic purge to prevent condensation in the torch.
HF-free ignition that avoids interference that could damage nearby electronic equipment.
Storage compartment for consumables.
Ideal for travel and construction sites
Accepts extension cords up to 100 m.
Reinforced body and anti-shock skids.
Compact and easily movable on site.
Protected against overvoltages up to 400 V (PROTEC 400).
Rated IP23S to withstand harsh environments.
Optimized cooling with a ventilation channel that isolates the electronic components from dust.
Delivered with:
a TPT 35 torch with a length of 4 m
a ground clamp with a 10 mm² cross-section cable, length 2 m
Two nozzles and two electrodes
In stock
Gys
Reference: GYSPOT 34.02-34.04
€1,184.78
979,16 € tax excl.
or 4 x 296,20 €
Free delivery
2-year warranty
The GYSPOT 34.02 and 34.4 have a power of 3500 A. These dent pullers are tools for dent repair and straightening of steel body panels (hood, door, roof, etc.). They feature several functions that make them complete and versatile tools. Thanks to its low power consumption, this nail puller model is powered by a simple 230 V outlet for the 34.02 model
We offer it in two versions: Single-phase 230 V (reference 065741) and three-phase 400 V (reference 067943)
A MULTI-FUNCTION DENT PULLER
Operating modes: • Welding of stars or rings for steel sheet pulling operations.
• Welding of corrugated wire, ideal for straightening a rounded profile (e.g.: wheel arch)
• Shrinking, for light impacts and finishing work.
• Use of the graphite pencil. • Welding of steel studs.
EASY TO USE
• Switch to toggle to graphite pencil mode.
• Intuitive, the potentiometer allows you to select both the power and the desired mode.
• Manual, the weld is generated by a simple press of the gun trigger.
It comes with an inertia hammer fitted with a star tip, nail puller + 3 stars - 1 shrinking tip and a ground pad
Cable lengths:
Ground: Section 50mm² - length 1.7 m
Gun: Section 50 mm² - length 2 m
| Combinations | Price | |
| €1,183.78 | ||
| €1,184.78 | ||
In stock
Gys
Reference: 053564
€297.45
245,83 € tax excl.
or 3 x 99,15 €
Free delivery
2-year warranty
Double-action dent pulling bar as it can also be used as a lever Length 86 cm
Supplier stock
Gys
Reference: 013636
€2,293.92
1 895,83 € tax excl.
or 4 x 573,48 €
Free delivery
2-year warranty
The Gys CUTTER 70 CT plasma cutter has a cutting capacity of 35 mm thickness on steel and 25 mm on aluminium in separation.
Suited to industrial environments, it is highly effective on solid sheets, mesh or painted structures.
Cutting speed superior to oxy-fuel.
Cuts all steels (mild, stainless, hardened, HLE), aluminium, copper, etc.
Optimised unit cooling thanks to the ventilation channel that isolates electronic components from dust.
Easy and fast consumable installation for maximum efficiency.
Premium TECMO® torch (leading supplier in Europe).
Superior cut quality: air-cooled torch body offering excellent arc stability at various operating levels.
Hypertherm®-compatible consumables.
Designed to withstand shocks and heat.
Quick torch connection/disconnection without tools, facilitating transport and maintenance.
Easy-to-use trigger mechanism for greater comfort.
Intuitive control panel: - 3 working modes: solid sheet / perforated sheet / lock -
manual air pressure adjustment (4.1 < 6.5 bar) with front bargraph.
HF-free ignition to avoid interference that could damage nearby electronic equipment.
Compatible with CNC kit for automated cutting table.
Gouging with maximum removal - Enables significant metal elimination (Pad and Nozzle specific options available)
Reinforced casing & non-slip feet.
Supplied with: one earth clamp + cable 4 m long - 10 mm² cross-section
This plasma cutter requires connection to a compressed air source with a flow rate of 185 L / minute.
In stock
Gys
Reference: 072343
€70.53
58,29 € tax excl.
Fast delivery
2-year warranty
This kit is compatible with GYS MULTIPEARL 210-4 and MULTIPEARL 214-4 welders
It includes:
- 1 plastic ring
- 3 ceramic nozzles "No Gas"
- 2 type B rollers with 2 grooves for flux-cored wire Ø 0.9/1.0 & 1.2 mm
- 3 contact tips Ø 0.9/1.0 mm
In stock
Gys
Reference: 072336
(1 review)
€50.37
41,63 € tax excl.
Fast delivery
2-year warranty
This kit is suitable for the GYS MULTIPEARL 210-2 welding machine
It includes:
- 1 plastic ring
- 3 ceramic nozzles "No Gas"
- 1 type A roller with 2 grooves for flux-cored wire Ø 0.9/1.0 & 1.2 mm
- 3 contact tips Ø 0.9/1.0 mm
Supplier stock
Gys
Reference: 045682
(2 reviews)
€347.88
287,50 € tax excl.
or 4 x 86,97 €
Free delivery
2-year warranty
Indispensable when the welding machine cannot be placed directly next to the welder, remote controls improve work efficiency and reduce welder fatigue.
Supplied with a 4 m cable.
8 m remote control length possible (reference 045675) available on the website
Compatible with the following Gys machines:
• PROGYS CEL 250 A TRI
• PROGYS FLEX 280 CEL
• GYSARC 300 TRI
• GYSARC 400 TRI
• EXAGON 400 CC/CV
• TIG 220 DC HF
• TIG 300 DC HF
• TITAN 400 DC HF
• TIG 201 AC/DC
• TIG 201L AC/DC
• PROTIG 201 AC/DC
• PROTIG 201L AC/DC
• TIG 220 AC/DC
• TIG 250 AC/DC
• TITANIUM 400 AC/DC
Supplier stock
Gys
Reference: Filtre
(1 review)
€36.20
29,92 € tax excl.
Fast delivery
2-year warranty
TH3 filter and pre-filter for respiratory mask:
- GYSMATIC 9/13 AIR TRUE COLOR XL (ref. 065727)
- GYSMATIC 5/13 AIR TRUE COLOR XXL (ref. 047846)
This filter must be used in conjunction with the pre-filter and the spark guard
Filter type: TH3 P R SL
Recommendation:
The filter lifespan is 12 months. During intensive use of the respiratory protection system, periodically check the filter for clogging and replace it if necessary before the end of the 12 months.
The particulate filter complies with Regulation (EU) 2016/425.
• The TH3 particulate filter has been designed and manufactured to meet the requirements of standard EN 12941:1998+A2:2008 with a TH3P R SL classification.
This filter can only provide this level of protection when used with the complete GYSMATIC AIR respiratory protection system.
| Combinations | Price | |
| €7.72 | ||
| €36.20 | ||
Supplier stock
Gys
Reference: 056992
€2,964.50
2 450,00 € tax excl.
or 4 x 741,13 €
Free delivery
2-year warranty
The POWERDUCTION 37LG induction unit provides immediate heating power for loosening, heating steel or aluminium. Light and portable, it can heat metal parts for several minutes without interruption thanks to its liquid cooling system.
The ideal tool in mechanics and maintenance:
• loosening steering tie rods (wheel alignment)
• removal of seized wiper blades, spare wheel carriers
• freeing seized bolts, steering ball joints without damaging the boot
• removal of seized driveshafts in the hub. • removal of car or HGV exhaust lines. • separation of bonded steel or aluminium components
Supplied complete, pre-assembled with 1 x 90° heating inductor
• Heating power: 3700 W, selectable in 250 W increments. Heats to the core of the metal, to a depth of 6 mm. Brings to red heat (approx. 1000°C)
Water cooling
Tank capacity: 1.5 L
• Safety and time saving: Immediate flameless heating on a precise area, allowing work near cables, pipes, or any heat-sensitive parts without dismantling them
• Portable unit: For use in hard-to-reach places. Supplied with a 2-metre induction cable
Supplier stock
Gys
Reference: 062504
(2 reviews)
€795.58
657,50 € tax excl.
or 4 x 198,90 €
Free delivery
2-year warranty
The Powerduction 10R is designed to heat, loosen and easily remove all mechanical parts in a matter of seconds: seized bolts/nuts, screws...etc. It is particularly recommended in the automotive, agricultural, maintenance, metal construction and locksmithing sectors
• Immediate flameless heating on a precise area, allowing work near cables, pipes, or any heat-sensitive part without dismantling them
• Handy: featherlight at 3.5 kg – 1.3 kg for the inductor alone
• Ergonomic: compact size and shoulder strap
• Easy to use: can be connected anywhere with a single-phase 230 V outlet
• Quick start: select and fit the inductor, plug in and use
• 1200 W power with high duty cycle:
Supplier stock
Gys
Reference: 021990
€1,559.13
1 288,58 € tax excl.
or 4 x 389,78 €
Free delivery
2-year warranty
Welding of M4, M5 and M6 studs by capacitor discharge
The GYSPOT ALU PRO FV unit is dedicated to straightening ALUMINIUM body panels. The unit welds studs to eliminate dents and impacts (door panel, bonnet, etc.) without stripping the interior
Microprocessor controlled
- Voltage (adjustable from 50 V to 200 V)
- Power (adjustable from 0 to 10)
- Automatic stud presence detection
Capacitor discharge 66 mF Fast welding (3 milliseconds)
Automatic gun:
The gun has no trigger; welding is triggered automatically when the tip slides into the gun. The ground is integrated into the gun
Supplied with:
- Automatic gun with 3 integrated ground pins. These ground pins are made of brass and their arrangement provides better stability of the gun during welding
- Aluminium dent repair accessory box (M4 studs, pulling rings, pull rod)
- Chuck for Ø 4 mm studs
The GYSPOT ALU PRO FV is protected against mains overvoltages up to 400 V
Operates at a supply voltage between 85 and 265 V. Thanks to its latest-generation "flexible voltage" switching power supply, the GYSPOT PRO FV can be connected to a 230V - 2A outlet
I² MAX 13,000 A
In stock
Gys
Reference: SPIRALE
€48.40
40,00 € tax excl.
Fast delivery
2-year warranty
| Combinations | Price | |
| €48.40 | ||
| €48.40 | ||
| €48.40 | ||
Supplier stock
Gys
Reference: 061842
€4,213.83
3 482,50 € tax excl.
Free delivery
2-year warranty
Using digital technology, the NEOPULSE 220 C XL is a single-phase pulsed MIG/MAG generator. A synonym for ultra-performance and high technology, it features numerous synergic curves and exceptional arc dynamics. Its intuitive and highly functional digital interface allows welding parameters to be adjusted with ease. Equipped with a precise 4-roller wire feeding system, the NEOPULSE 220 C XL offers industrial users maximum productivity.
MULTI-PROCESS WELDING
MIG/MAG :
- steel and stainless steel wire: Ø 0.6 to 1.0 mm
- aluminium wire: Ø 0.8 to 1.2 mm
- CuSi and CuAl wire: Ø 0.8 to 1.0 mm
MMA DC / Pulsed:
basic, rutile and cellulosic electrodes (up to Ø 5 mm).
TIG DC: Pulsed.
SYNERGIC Mode: After entering 2 data inputs (material/gas combination and wire diameter), the NEOPULSE automatically determines the optimal welding conditions and allows settings to be adjusted (wire feed speed, voltage, current, arc length).
PRECISE Wire feeder motor speed calibration to adjust the displayed voltage measurement and refine energy calculation. Energy display and post-weld energy calculation in accordance with standards EN1011-1, ISO/TR 18491 and QW-409. Portability: load/save user JOBS and machine configuration from a USB key. Traceability: trace/record all welding steps, bead by bead, during industrial manufacturing in accordance with standard EN ISO 3834.
OPTIMISED MIG/MAG SETTINGS
Welding processes: Manual, Standard, Pulsed, Arc Module (hot/cold current variation). Tack welding modes: SPOT and DELAY. Trigger management: 2T and 4T. Precise welding cycle control: CreepSpeed, Softstart, Hotstart, Upslope, Downslope, Crater Filler, Post-gas, etc.
MAXIMUM PRODUCTIVITY
4 microprocessors multiply calculation speed tenfold and optimise generator efficiency. High productivity thanks to its high duty cycle (150 A @ 60%). Compatible wire reels: Ø 200 / 300 mm. Powerful 4-roller wire feeder for efficient wire feeding. Very high arc voltage ensuring easy arc striking and exceptional arc dynamics.
ERGONOMIC
New simplified interface centred on welders' navigation habits. Full machine and synergy update via USB key. Storage of 500 welding programs (backup possible on USB key). Current/voltage display during and after welding (WPS/PQR). Choice of main parameter to display on screen (wire speed, average welding current, etc.). Internal lighting of the wire feeder and reel. Viewing window on access panel to check filler wire consumption. Intelligent ventilation management to reduce power consumption, dust intake and machine noise. Compatible with Push-Pull torch (24 V)
ROBUST AND MOBILE
Reinforced casing & anti-slip feet. IP23S enclosure. 2 handles for easy transport.
Upon delivery, this machine is fitted with reversible rollers for steel or stainless steel wire Ø 0.8 / 1 mm.
D200 reel support supplied with this machine.
MIG-MAG torch and earth clamp available as options.
In stock
Gys
Reference: 044654
(4 reviews)
€16.94
14,00 € tax excl.
Fast delivery
2-year warranty
This consumable kit for TIG torch type SR9 includes:
- 2 nozzles (N4 and N6)
- 1 nozzle and collet body Ø1.6
- 1 collet Ø1.6
- 2 caps (1 short + 1 long)
- Universal tungsten electrode WR2 AC/DC Ø1.6 for welding steel, stainless steel and aluminium.
In stock
Gys
Reference: 044685
(1 review)
€22.18
18,33 € tax excl.
Fast delivery
2-year warranty
This kit includes:
- 2 nozzles (N4 and N6)
- 2 collet body and nozzle holders (Ø1.6 + /2.4)
- 2 collets (Ø1.6+Ø 2.4)
- 2 back caps (1 short + 1 long)
- 2 universal WR2 AC/DC tungsten electrodes (Ø1.6 + Ø2.4) for welding steels, stainless steel, and aluminium.
Save 20%
In stock
Gys
Reference: 056923
(1 review)
€398.29
€497.87
329,17 € tax excl.
or 4 x 99,57 €
Free delivery
2-year warranty
The Hand-Duction is designed to heat, loosen and easily remove all mechanical parts in a matter of seconds: seized bolts/nuts, screws...etc. It is particularly recommended in the automotive, agricultural, industrial and construction industry sectors
An ergonomic tool
Lightweight, it weighs only 2.54 kg
Its pistol shape provides an excellent grip
Equipped with an LED at its tip, it illuminates the area to be heated
Easy to use, simply plug it in and use it
With a power of 1000 W, the Hand-Duction also features an air cooling circuit. ... WHICH OFFERS A CONSIDERABLE TIME SAVING
A considerable time saving
Immediate flameless heating on a precise area, allowing work close to cables, pipes, or any heat-sensitive part without removing them
Supplied with three inductors, it can be adapted to all kinds of parts. Changing the inductor is very simple via a locking/unlocking system at the end of the product
In stock
Gys
Reference: 037595
(2 reviews)
€44.98
37,17 € tax excl.
Fast delivery
2-year warranty
5 gouging nozzles 70 A for plasma torch MT-70
In stock
Gys
Reference: 037557
(4 reviews)
€39.33
32,50 € tax excl.
Fast delivery
2-year warranty
1 diffuser 20/70 A for plasma torch AT -70 -MT 70
In stock
Gys
Reference: 037564
(5 reviews)
€35.30
29,17 € tax excl.
Fast delivery
2-year warranty
5 electrodes 20/70 A for plasma torch MT-70 / AT-70
In stock
Gys
Reference: 037588
(1 review)
€22.69
18,75 € tax excl.
Fast delivery
2-year warranty
5 cutting nozzles 70 A for plasma torch MT-70 / AT-70
In stock
Gys
Reference: 037571
(3 reviews)
€24.71
20,42 € tax excl.
Fast delivery
2-year warranty
5 cutting nozzles for plasma torch MT-70 / AT-70
In stock
Gys
Reference: 037601
(3 reviews)
€47.70
39,42 € tax excl.
Fast delivery
2-year warranty
1 protection nozzle 20/70A for plasma torch AT-70 MT-70
In stock
Gys
Reference: 037649
(3 reviews)
€26.17
21,63 € tax excl.
Fast delivery
2-year warranty
1 cutting deflector pad 20/70A for automatic torch AT-70
In stock
Gys
Reference: 037632
(3 reviews)
€24.71
20,42 € tax excl.
Fast delivery
2-year warranty
1 gouging pad 20/70A for torch MT -70
In stock
Gys
Reference: 037625
(3 reviews)
€26.17
21,63 € tax excl.
Fast delivery
2-year warranty
1 cutting guide 20/70A for torch MT -70
In stock
Gys
Reference: 039988
(1 review)
€331.75
274,17 € tax excl.
or 4 x 82,94 €
Free delivery
2-year warranty
This CNC interface kit is installed between your Plasma cutter and a numerically controlled cutting table
This kit is compatible with Gys brand plasma cutters whose model names are listed below:
Plasma 45-70-85-105-125
Gys
Reference: 039490
€599.95
495,83 € tax excl.
or 4 x 149,99 €
Free delivery
2-year warranty
The WCU 0.5KW A cooling unit enables cooling of liquid-cooled TIG torches.
Controlled and powered by the GYS TIG 220 DC welding generator, its operation is determined by the action on the torch. It activates automatically when TIG welding begins.
Tank capacity: 1.5 L
In stock
Gys
Reference: AWAG
€29.50
24,38 € tax excl.
Fast delivery
2-year warranty
Two sizes are available
These adapters are designed to be used with the WAG 40 sharpener
045446 for tungsten electrodes Ø 1 mm
722050 for tungsten electrodes Ø 1.6 mm
045453 for tungsten electrodes Ø 2 mm
| Combinations | Price | |
| €29.50 | ||
| €29.50 | ||
| €29.50 | ||
In stock
Gys
Reference: 052222
€1,027.49
849,21 € tax excl.
or 4 x 256,87 €
Free delivery
2-year warranty
This dent puller has a power of 3800 A
It runs on a 16A outlet and a 400 V power supply
It allows:
The welding of studs, rings or rivets.
It features a "shrinking" function, sheet metal heating pen
It can be used as a nail puller with star attachments
Only 2 parameters to select:
• the power level (among 11 levels)
• the tool used (among 7 tools) => No need to set the time and intensity anymore. Automatic ignition system The weld spot is automatically generated by a simple contact between the tool and the panel to be straightened
It is supplied with a slide hammer + 1 box of accessories
Cable lengths:
Ground: Section 70 mm² - length 2 m
Gun: Section 70 mm² - length 2 m
In stock
Gys
Reference: 052215
(2 reviews)
€1,115.02
921,55 € tax excl.
or 4 x 278,76 €
Free delivery
2-year warranty
This dent puller has a power of 3800 A
It runs on a 16A outlet and a 230 V power supply
It allows:
The welding of studs, rings or rivets.
It features a "shrinking" function, sheet metal heating pen
It can be used as a nail puller with star attachments
Only 2 parameters to select:
• the power level (among 11 levels)
• the tool used (among 7 tools) => No need to set the time and intensity anymore. Automatic ignition system The weld spot is automatically generated by a simple contact between the tool and the panel to be straightened
It is supplied with a slide hammer + 1 box of accessories
Cable lengths:
Ground: Section 70 mm² - length 2 m
Gun: Section 70 mm² - length 2 m
In stock
Gys
Reference: 041561
(5 reviews)
€6.56
5,42 € tax excl.
Fast delivery
2-year warranty
Bags of 200 nails to use with the stud welding nozzle 041523
In stock
Gys
Reference: 037489
(12 reviews)
€297.45
245,83 € tax excl.
or 3 x 99,15 €
Free delivery
2-year warranty
This WELD 810 transport trolley by GYS can accommodate:
The welding machine
Gas cylinders up to 4m³
Remote control accessories
Dimensions: Height 81 cm - Length 70 cm - Width 50 cm
Dimensions of the upper shelf: 35 x 55 cm
Trolley sold bare
Supplier stock
Gys
Reference: 014787
(3 reviews)
€1,386.62
1 146,00 € tax excl.
or 4 x 346,66 €
Free delivery
2-year warranty
The CUTTER 45 CT is a 45 A plasma cutter with a cutting capacity of 25 mm* thickness on a wide range of materials. Designed for use in demanding environments, it features a very robust mechanism and an intuitive control panel.
• Cuts mild steel, stainless steel, hardened steel, HLE steel, aluminium, copper…
• 3 working modes:
- Cutting on solid sheet metal
- Cutting on grid/mesh supports
- Trigger lock
• HF-free ignition, avoiding interference that could damage nearby electronic equipment
• Pre-wired for use on an automatic cutting table.
• Flexible Voltage, the CUTTER operates on a supply voltage between 85 and 265 V.
Delivered without torch.
MT-70 torches for professional use of your cutter, 6 or 12 m long, available as an option on the site.
* Clean cut is 25 mm, separation cut 30 mm and piercing 12 mm when this cutter is fitted with an MT-70 torch
Ground clamp + cable 2 m long, 10 mm² cross-section, supplied with the unit
In stock
Gys
Reference: 041417
€55.45
45,83 € tax excl.
Fast delivery
2-year warranty
This kit includes:
5 contact tips Ø 1.0 M8 steel / stainless steel
5 contact tips Ø 1.2 M8 steel / stainless steel
5 contact tips Ø 1.0 M8 aluminium
5 contact tips Ø 1.2 M8 aluminium
3 diffusers 350 A
3 gas nozzles 350 A
Supplier stock
Gys
Reference: 045675
€196.63
162,50 € tax excl.
or 3 x 65,54 €
Free delivery
2-year warranty
manual remote control RC-HA1
Compatible with the following Gys welding machines:
• PROGYS CEL 250 A TRI
• PROGYS FLEX 280 CEL
• GYSARC 400 TRI
• EXAGON 400 CC/CV
• TIG 200 DC HF FV
• TIG 220 DC HF
• TIG 300 DC HF
• TITAN 400 DC HF
• TIG 200 AC/DC
• TIG 220 AC/DC
• TIG 250 AC/DC
• TITANIUM 400 AC/DC
Save 10%
In stock
Gys
Reference: 013629
(5 reviews)
€1,406.78
€1,563.09
1 162,66 € tax excl.
or 4 x 351,70 €
Free delivery
2-year warranty
The CUTTER 45 CT is a 45 A plasma cutter with a cutting capacity of 20* mm thickness on a wide range of materials. Designed to operate in harsh environments, it features a very robust mechanism and an intuitive control panel.
• Cuts steels (mild, stainless, hardened, HSLA), aluminum, copper…
• 3 working modes:
- Cutting on solid sheets
- Cutting on grid supports
- Trigger lock
• HF-free ignition that avoids interference which could damage nearby electronic equipment
• Pre-wired for use on an automatic cutting table.
• Flexible Voltage, the CUTTER operates on a supply voltage between 85 and 265 V.
Supplied with a TPT 40 torch for cutting only, with a length of 4 m.
* Clean cut is 15 mm, separation cut 20 mm and piercing 8 mm when this cutter is equipped with a TPT 40 torch
In stock
Gys
Reference: 041233
(14 reviews)
€50.22
41,50 € tax excl.
Fast delivery
2-year warranty
This kit includes:
5 contact tips Ø 0.8 M6 steel / stainless steel
5 contact tips Ø 1.0 M6 steel / stainless steel
5 contact tips Ø 1.0 M6 aluminium
3 contact tip holders 250 A
5 nozzle springs
3 gas nozzles
In stock
Gys
Reference: 045712
(7 reviews)
€11.05
9,13 € tax excl.
Fast delivery
2-year warranty
2 gas fittings for Ø 0.6 mm inner diameter hose
1/4 D thread
In stock
Gys
Reference: GYS-GAL1B-FLUX
(1 review)
€24.15
19,96 € tax excl.
Fast delivery
2-year warranty
We offer 1 reversible roller for flux-cored wire for MIG-MAG welder GYS
Ø 0,6 /0,9 mm
0,9 / 1,2 mm
Compatible with Gys welders:
MONOGYS 200-2CS
MONOGYS 250/320
TRIMIG
PROMIG
MULTIPEARL 210 and 211
MULTIWELD 320 and 400
NEOPUSE 220
KRONOS
Wire feeder WF35
| Combinations | Price | |
| €24.15 | ||
| €24.15 | ||
In stock
Gys
Reference: GYS-GAL-B-ALUMINIUM
€19.06
15,75 € tax excl.
Fast delivery
2-year warranty
1 double V-groove roller 35° for GYS MIG welder for solid aluminium wires, available for wire diameters:
0.8/ 1 mm
1 / 1.2 mm
GYS welder compatibility:
• MONOGYS 200-2CS et 250-4CS
• TRIMIG 200-4S, 250-4S et 300-4S
• PROMIG 350-4S et 350-4S DUO DV
• TF-4R
• MULTIPEARL 200.4 XL et 201.4
• CARMIG
• M1, M3, T1 et T3 GYS
• W5S-4L
| Combinations | Price | |
| €19.06 | ||
| €19.06 | ||
In stock
Gys
Reference: GYS-GAL-B-ACIER
€19.61
16,21 € tax excl.
Fast delivery
2-year warranty
1 double-groove roller for GYS MIG-MAG welder for steel or stainless wire, available for wire diameter:
0.6 / 0.8 mm
0.8 / 1 mm
1 / 1.2 mm
Compatible with GYS welders:
• MONOGYS 200-2CS
| Combinations | Price | |
| €19.61 | ||
| €19.61 | ||
| €19.61 | ||
Save 20%
In stock
Gys
Reference: 045415
€961.95
€1,202.44
795,00 € tax excl.
or 4 x 240,49 €
Free delivery
2-year warranty
The quality of a TIG weld depends on the proper sharpening of the tungsten electrode. The WAG 40 is the portable solution for optimal preparation.
This sharpener allows:
Sharpening of 6 electrode diameters (Ø 1 to 4 mm).
Angle adjustment for all situations: angular adjustment from 15 to 180°.
It features an integrated grinding particle filter to protect the operator from dust.
Included upon delivery:
Adapter for electrode Ø 1.6, 2.4 and 3.2 mm.
1 dust filter
1 diamond disc Ø 40
In stock
Gys
Reference: 041523
€22.94
18,96 € tax excl.
Fast delivery
2-year warranty
1 nail welding nozzle for 150 A torch
This nozzle fits onto the end of your torch as a replacement for the gas nozzle.
It allows you to weld studs for dent pulling on car bodywork.
In stock
Gys
Reference: 084803
(18 reviews)
€7.87
6,50 € tax excl.
Fast delivery
2-year warranty
Aluminium Electrodes - D 3.2 mm - L 350mm
Welds aluminium parts and alloys
5% silicon content
Electrode diameter: 3.2 mm
Welding thickness: 3.2 mm
Welding power setting: 90 Amp
Ideal for the automotive, marine, chemical industry…
Connect the electrode holder to the + terminal of the welder
Arc striking from 60V
Classification:
AWS A5.3 : E4043
ISO 18273 : Al 4043 A
DIN 1732 : EL-AlSi5
Supplier stock
Gys
Reference: 050037
(4 reviews)
€64.23
53,08 € tax excl.
Fast delivery
2-year warranty
This kit includes
- 1 electrode for corrugated wire
- 25 corrugated wires
- 1 electrode for rings
- 50 straight pulling rings
- 1 pulling rod
Supplier stock
Gys
Reference: 052178
(3 reviews)
€1,306.05
1 079,42 € tax excl.
or 4 x 326,51 €
Free delivery
2-year warranty
This 3800 A dent puller operates on a 16 A outlet
Only 2 parameters to select:
• the power level (from 11 levels)
• the tool used (from 7 tools)
=> No more need to set the time and intensity
Manual ignition system
The weld spot is generated by pulling the trigger when the tool is in contact with the part to be straightened
Automatic ignition system
The weld spot is generated automatically by simple contact between the tool and the part to be straightened
It comes with:
1 ground clamp 70 mm² (2 m cable)
2 multi-function guns (70 mm² cable, length 2 m + 3 m)
Inertia hammers
Use as nail puller with stars
Stud, rivet and ring welding
Shrinking, pencil and sheet metal heating functions
1 mains power cable 8 m long
1 accessories box including:
20 copper-protected nail puller stars
1 washer electrode
50 washers
1 ground hook
1 carbon electrode
1 star chuck for inertia hammer
1 hex key
1 heating spot electrode
1 electrode for threaded rivets
1 electrode for rivets
50 studs Ø 5 x 18 mm
50 threaded rivets Ø 5 x 18 mm
50 threaded rivets Ø 5 x 12 mm
100 rivets Ø 3 x 3.25 mm
100 rivets Ø 3 x 4.50 mm
In stock
Gys
Reference: 029743
(15 reviews)
€801.80
662,67 € tax excl.
or 4 x 200,45 €
Free delivery
2-year warranty
Suitable for maintenance and bodywork, the EASYCUT 40 plasma cutter easily cuts all types of metal up to 15 mm thick. With a power output of 40 A, it excels at precision cutting at low amperage.
Inverter technology ensuring quality cutting on all steels (mild, stainless, hardened, HLE), aluminium, copper, etc.
Easy and quick consumable installation (Trafimet® standard).
Efficient cutting: air-cooled torch body providing high arc stability at various operating levels.
Easy-to-use trigger mechanism for greater comfort. Designed to withstand shocks and heat.
Quick torch connection/disconnection, no tools required.
Manual air pressure adjustment (2.5 < 6.5 bar) with front panel bargraph.
Automatic torch detection.
HF-free ignition to avoid interference that could damage nearby electronic equipment.
Protected against overvoltage and overcurrent
Torch presence or insufficient air pressure indicator.
→ Requires connection to a compressed air supply delivering 100 l/minute at a variable pressure between 2.5 and 6.5 bar depending on the machine setting.
Supplied with a TPT 40 torch 4 m long and a 10 mm² section earth clamp cable 2 m long.
Supplier stock
Gys
Reference: 041486
€428.55
354,17 € tax excl.
or 4 x 107,14 €
Free delivery
2-year warranty
Spool-Gun torch for Ø 100 mm wire spool, length 4 M.
Equipped with a Ø 0.8 mm contact tip M6 thread.
Duty cycle 150 A @ 60%
Compatible with Gys welding machines:
M1 and T1 Gys auto - T1 Gys auto DV - M3 and T3 Gys auto - T3 Gys auto DV - AUTOPULSE 320-T3
Save 10%
In stock
Gys
Reference: 013841
(1 review)
€2,647.03
€2,941.15
2 187,66 € tax excl.
or 4 x 661,76 €
Free delivery
2-year warranty
The Gys CUTTER 70 CT plasma cutter has a cutting capacity of 35 mm thickness on steel and 25 mm on aluminium in separation mode.
Suited to industrial environments, it is highly effective on solid sheets, mesh sheets or painted structures.
Cutting speed superior to oxy-fuel.
Cuts all steels (mild, stainless, hardened, HLE), aluminium, copper, etc.
Optimised machine cooling thanks to the ventilation channel isolating electronic components from dust.
Easy and quick consumable installation for maximum efficiency.
Premium TECMO® torch (leading supplier in Europe).
Superior cut quality: air-cooled torch body providing high arc stability at various operating levels.
Hypertherm®-compatible consumables.
Designed to withstand shocks and heat.
Quick torch connection/disconnection, no tools required, facilitating transport and maintenance.
Easy-to-use trigger mechanism for greater comfort.
Intuitive control panel: - 3 working modes: solid sheet / perforated sheet / lock -
manual air pressure adjustment (4.1 < 6.5 bar) with front panel bargraph.
HF-free ignition to avoid interference that could damage nearby electronic equipment.
Compatible with CNC kit for automated cutting table.
Gouging with maximum removal - Allows significant metal removal (Skid and Nozzle specific options available)
Reinforced casing & anti-slip feet.
Supplied with an MT-70 torch 6 m long and an earth clamp + cable 4 m long - 10 mm² section
This plasma cutter requires connection to a compressed air supply with a flow rate of 185 L/minute.
In stock
Gys
Reference: 044678
(12 reviews)
€19.15
15,83 € tax excl.
Fast delivery
2-year warranty
This kit includes:
- 2 nozzles (N5 and N7)
- 2 collet body and nozzle holders (Ø1.6 + Ø2/2.4)
- 2 collets (Ø1.6+Ø2.4)
- 2 back caps (1 short + 1 long)
- 2 universal tungsten electrodes WR2 AC/DC (Ø1.6 + Ø2.4) for welding steel, stainless steel and aluminium.
It is particularly useful for the Gys machines listed below and all those fitted with a torch reference SR 17 -18 and 26
TIG 160 DC
TIG 168 DC HF
TIG 200 DC HF FV
Save 10%
In stock
Gys
Reference: 060258
(10 reviews)
€29.24
€32.49
24,17 € tax excl.
Fast delivery
2-year warranty
Capacity 7 kg
For electrodes up to 45 cm
Maximum electrode temperature 105°C
Dimensions: 500 x 120 x 110 mm - 430g
In stock
Gys
Reference: 041332
(40 reviews)
€37.21
30,75 € tax excl.
Fast delivery
2-year warranty
Special pliers for MIG/MAG torch
Uses:
- To clean the inside of the nozzle
- Cut excess wire at the torch outlet before the welding operation
- Assists in unscrewing the contact tip or gas nozzle from the torch.
- Suitable for gas nozzles sz Ø 12 to 15 mm.
In stock
Gys
Reference: 082359
(34 reviews)
€8.57
7,08 € tax excl.
Fast delivery
2-year warranty
Stainless Steel 316L Electrodes - D2 mm - L 300mm
Welds stainless steel 316L/308L/304L
Electrode diameter: 2 mm
Weldable thickness: 2 mm
Welding power setting: 40 to 70 Amp
Multiple positions (except downhill)
Fine-looking weld bead
Good slag detachment
Connect the electrode holder to the + terminal of the machine
Arc striking from 40V
Classification:
EN 1600 : 19123 LR12
AWS 5.4: E 316L-16
In stock
Gys
Reference: ELEC-2.5-ACIER-GYS
(103 reviews)
€18.66
15,42 € tax excl.
Fast delivery
2-year warranty
GY38 Steel Rutile Electrodes - Ø 2.5mm - L 350mm
Welds steel
Electrode diameter: 2.5 mm
Material thickness: 2.5 to 6mm
Welding power setting: 80Amp
Easy arc striking and re-striking
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - terminal of the welder
Classification:
AWS A 5.1 : E6013
EN ISO 2560-A : E 420 RC 11
| Combinations | Price | |
| €3.42 | ||
| €8.57 | ||
| €18.66 | ||
| €30.23 | ||
In stock
Gys
Reference: WS3915G
(2 reviews)
€67.55
55,83 € tax excl.
Fast delivery
2-year warranty
Special welding coolant is essential for optimizing and preserving the performance of your spot welder's cooling system, and is also suitable for other welding processes. Its unique formula, anti-corrosive and low-conductivity, reduces the effects of electrolysis. The special welding coolant prevents the build-up of deposits and blockage of the cooling circuit compared to a standard coolant.
Its advantages:
1) Its low conductivity limits the risk of electrolysis in the cooling circuit and prevents deposits responsible for blockages in the cooling circuit.
2) Anti-corrosive in contact with heavy metals.
3) Frost-resistant down to -20°C, for operation even in the most demanding conditions.
4) Its ready-to-use formula can be used pure without any dilution.
Available in two packaging sizes of 5 or 10 litres
| Combinations | Price | |
| €140.97 | ||
| €67.55 | ||
In stock
Gys
Reference: AMF
(26 reviews)
€9.93
8,21 € tax excl.
Fast delivery
2-year warranty
Male / Female Adapter AMF 50/25
Note: 2 references available:
Female: Ø 9 mm - Male 13 mm for reference 038127
Female: Ø 13 mm - Male 9 mm for reference 038110
Duty cycle 300A @ 35% - 200 A @60%
| Combinations | Price | |
| €9.93 | ||
| €12.61 | ||
In stock
Gys
Reference: GYS-GAL2-ALUMINIUM
(7 reviews)
€32.57
26,92 € tax excl.
Fast delivery
2-year warranty
2 double V-groove 35° drive rolls for GYS welder for solid aluminum wire, available for wire diameters:
0.8/ 1 mm
1 / 1.2 mm
GYS welder compatibilities:
• MONOGYS 200-4CS and 250-4CS
• TRIMIG 200-4S, 250-4S and 300-4S
• PROMIG 350-4S and 350-4S DUO DV
• TF-4R
• MULTIPEARL 200.4 XL and 201.4
• CARMIG
• M1, M3, T1 and T3 GYS
• W5S-4L
| Combinations | Price | |
| €32.57 | ||
| €32.57 | ||
In stock
Gys
Reference: 042889
(13 reviews)
€4.54
3,75 € tax excl.
Fast delivery
2-year warranty
This adapter for a 5 kg welding wire spool is mounted on the shaft of your 15 kg spool holder so that your welding machine accepts Ø 200 mm spools.
It is used in particular with the Multi-Pearl 201-4 welding machine available on our website.
In stock
Gys
Reference: GYS-GAL2-ACIER
(22 reviews)
€35.30
29,17 € tax excl.
Fast delivery
2-year warranty
2 double-groove drive rolls for GYS MIG-MAG welder for steel or stainless steel wire, available for wire diameters:
0.6 / 0.8 mm
0.8 / 1 mm
1 / 1.2 mm
Compatible with Gys welding machines:
• MONOGYS 200-4CS and 250-4CS
• TRIMIG 200-4S, 250-4S and 300-4S
• PROMIG 350-4S and 350-4S DUO DV
• TF-4R
• MULTIPEARL 200.4 XL and 201.4
• CARMIG
• M1, M3, T1 and T3 GYS
• W5S-4L
| Combinations | Price | |
| €35.30 | ||
| €35.30 | ||
| €31.25 | ||
In stock
Gys
Reference: 042407
(8 reviews)
€40.28
33,29 € tax excl.
Fast delivery
2-year warranty
2 double-groove drive rollers for GYS MIG-MAG welder for flux-cored wire Ø 0.9 and 1.2 mm
Compatible with GYS welders:
TRIMIG 200-4S, 250-4S and 300-4S
PROMIG 350-4S and 350-4S DUO DV
TF-4R
MULTIPEARL 200.4 XL and 201.4
W5S-4L
MONOGYS
In stock
Gys
Reference: GYS+GAL1D-FLUX
(7 reviews)
€17.64
14,58 € tax excl.
Fast delivery
2-year warranty
Reversible roller for:
Solid wire Ø0.8 / flux-cored wire 0.9
Flux-cored wire Ø 0.6 / 0.9 mm
Suitable for GYS machines:
Easymig 110 - 130 and 140
Smartmig 110
suitable for DECA machines:
Miga 215 - Miga 218 and Miga 220.
suitable for SCHUMACHER machines:
M 120 NG
D 144WG
| Combinations | Price | |
| €17.64 | ||
| €17.64 | ||
In stock
Gys
Reference: 039483
(6 reviews)
€19.11
15,79 € tax excl.
Fast delivery
2-year warranty
Drive roller for GYS MIG-MAG welding machine for steel or stainless steel wire of cross-section 0.6 and 0.8 mm.
Compatible with GYS welding machines:
Easymig: 110 - 130 and 140
Smartmig 110
Sparkmig 110
Neomig 130
Compatible with DECA welding machines:
Miga 215 - Miga 218 and Miga 220.
In stock
Gys
Reference: 049468
(2 reviews)
€8.41
6,95 € tax excl.
Fast delivery
2-year warranty
5 carbon electrodes sheet metal heating Ø 10 mm Length 300 mm
Weight 200 grams (set of 5)
In stock
Gys
Reference: 053922
(6 reviews)
€35.79
29,58 € tax excl.
Fast delivery
2-year warranty
This kit includes:
- 20 copper-protected nail-puller stars
- 1 washer electrode
- 50 washers
- 1 earth hook
- 1 carbon electrode
In stock
Gys
Reference: 041226
(22 reviews)
€49.40
40,83 € tax excl.
Fast delivery
2-year warranty
This kit includes:
5 contact tips Ø 0.6 M6 steel / stainless steel
5 contact tips Ø 0.8 M6 steel / stainless steel
5 contact tips Ø 0.8 M6 aluminium
3 contact tip holders 150 A
5 nozzle springs
3 gas nozzles
In stock
Gys
Reference: 041868
(18 reviews)
€6.96
5,75 € tax excl.
Fast delivery
2-year warranty
Special nozzle for gasless welding
Suitable for all MB15 type torches
In stock
Gys
Reference: GYS-GAL1A-FLUX
(13 reviews)
€23.15
19,13 € tax excl.
Fast delivery
2-year warranty
Reversible drive roll for GYS MIG-MAG welder for flux-cored wire, available in the following diameters:
0.8 mm solid wire / 0.9 mm flux-cored wire
0.9 / 1.2 mm flux-cored wire
0.6 / 0.9 mm flux-cored wire
Compatible with GYS welding machines:
Smartmig 142 - 152 - 162 - 182 - 183 - 3P
Easymig 150 - 160 - 160XL
Multipearl 200-2
Multiweld
Monogys 200-2CS
| Combinations | Price | |
| €23.15 | ||
| €23.15 | ||
| €23.15 | ||
In stock
Gys
Reference: 041196
(28 reviews)
€17.04
14,08 € tax excl.
Fast delivery
2-year warranty
Double-groove drive roll for GYS MIG-MAG welding machine for aluminium wire Ø 0.8 and 1 mm.
Compatible with GYS machines:
Easymig 150 - 160 - 160XL
Smartmig 142 - 152 - 162 - 182 - 183 - 3P
Multipearl 200-2
Multiweld
In stock
Gys
Reference: GYS-GAL1A-ACIER
(23 reviews)
€17.02
14,07 € tax excl.
Fast delivery
2-year warranty
Double-groove drive roll for GYS MIG-MAG machine for steel or stainless steel wire, available for diameters:
0.6 / 0.8 mm.
0.8 / 1 mm
Compatible with GYS machines:
Smartmig 142 -152 - 162 - 182 - 183 3P
Easymig 150 - 160 - 160XL
Sparmig 140 - 160
Multipearl 200-2
Multiweld
| Combinations | Price | |
| €17.02 | ||
| €18.15 | ||
Save 10%
Supplier stock
Gys
Reference: 055353
(33 reviews)
€499.35
€554.83
412,72 € tax excl.
or 4 x 124,84 €
Free delivery
2-year warranty
This stud puller with a power of 2600 A allows:
Welding of rings or stars to pull out dented panels
Welding of corrugated wire to straighten a wheel arch or a rounded shape
Shrinking of light impacts and finishing work with a graphite pencil
This straightening unit operates on a 16 A outlet
Delivered with a 1.1 kg slide hammer and star tip stud puller, 3 stars, 1 shrinking tip and 1 ground pad
Easy to use, a switch allows switching to graphite pencil mode
The potentiometer allows selecting both the power and the desired mode
The weld spot is generated by simply pressing the trigger of the gun
Cable lengths:
Ground: 1m70
Gun: 1m80
Power supply: 2m
Optional:
Consumable box for Gyspot 27.02 reference 053922
In stock
Gys
Reference: 041240
(33 reviews)
€28.74
23,75 € tax excl.
Fast delivery
2-year warranty
This kit allows gasless welding on GYS EasyMig and SmartMig welders
It includes:
1 drive roller with a Ø 0.9/1.2 mm groove for Ø 0.9 and 1.2 mm gasless wire
3 contact tips for Ø 0.9 mm flux-cored wire
1 special gas nozzle for flux-cored wire
Compatible with 150A torches only.
In stock
Gys
Reference: 050655
€30.04
24,83 € tax excl.
Fast delivery
2-year warranty
Washer holder electrode
Supplier stock
Gys
Reference: 089280
(1 review)
€47.19
39,00 € tax excl.
Fast delivery
2-year warranty
2 Type B Drive Rolls for flux-cored wire 1.2/1.6 mm MIG welding GYS machine
In stock
Gys
Reference: 060685B
€59.50
49,17 € tax excl.
Fast delivery
2-year warranty
Power supply: 230 V - 50 Hz
Electrode capacity: 5 kg
Electrode length: 450 mm
Max temperature: 20 to 150 °C
Weight: 3 kg
Size: 170 x 610 mm
In stock
Gys
Reference: 040830
(1 review)
€3.42
2,83 € tax excl.
Fast delivery
2-year warranty
5 lenses dimension 102 x 40 mm internal replacement for the protection of the LCD filter of the GYS TECHNO 11 welding helmet
In stock
Gys
Reference: 080782
€54.45
45,00 € tax excl.
Fast delivery
2-year warranty
This complete kit contains:
- 1 nozzle
- 1 diffuser
- 3 tips Ø0.9 mm
- 3 electrodes
This kit is compatible with the TPT 35 torch model, notably used on the GYS Cutter 35K PFC plasma cutter
In stock
Gys
Reference: 080799
(1 review)
€33.28
27,50 € tax excl.
Fast delivery
2-year warranty
10 nozzles for TPT35 type torch supplied with the GYS Cutter 35 K PFC plasma cutter
In stock
Gys
Reference: 040182
(1 review)
€54.15
44,75 € tax excl.
Fast delivery
2-year warranty
4 nozzles suitable for the torch on the Gys Cutter 35 KF PFC plasma cutter.
These nozzles are also compatible with plasma cutters equipped with a torch of type MT25K - TPT25 - TPT35
Save 10%
Gys
Reference: 077287
€540.62
€600.69
446,82 € tax excl.
or 4 x 135,16 €
Free delivery
2-year warranty
Ultra-compact, the PROTIG 160 DC (160 A) with Lift arc start ensures high-quality welds on mild and stainless steels. Its intuitive interface allows you to adjust parameters with ease.
OPTIMISED DC WELDING
DC TIG: ensures quality welding on all ferrous materials such as steel, stainless steel and also copper and its alloys.
Lift contact arc start for electrosensitive environments.
Excellent weld finish thanks to downslope (user-adjustable) and post-gas (managed automatically).
Automatic torch detection: compatible with lamella and double-button torches.
MMA WELDING
MMA welding current from 20 to 160 A.
Compatible with basic, rutile, stainless steel and cast iron electrodes (up to Ø 4 mm).
3 integrated welding aids:
- Antisticking: reduces the risk of electrode sticking when in contact with the workpiece
- Hot Start (adjustable): facilitates arc starting and is set in seconds according to the type of metal
- Arc Force: momentary increase in current in difficult welding situations
SAFETY FEATURES
Optimised machine cooling with thermal protection.
Protected against overloads and overvoltages up to 400 V. Compatible with a generator.
Supplied with
1 TIG torch SR17 DB length 4 m
1 earth clamp + cable cross-section 16 mm² length 2 m
1 electrode holder + cable cross-section 16 mm² length 2 m
In stock
Gys
Reference: 043596
(5 reviews)
€7.01
5,79 € tax excl.
Fast delivery
2-year warranty
5 replacement outer lenses 104x96 mm for LCD filter protection for GYS welding helmet
This size is suitable for the ALIEN XXL+ welding helmet.
In stock
Gys
Reference: 043886
(1 review)
€7.36
6,08 € tax excl.
Fast delivery
2-year warranty
10 replacement inner lenses 106 x 66 mm for the protection of the LCD filter in GYS welding helmets
This size is suitable for GYS LCD welding helmets, models:
PRO+ Zeus and Ergotech
PANORAMIC Apollo
EXPERT: Spaceview
Gysmatic Truecolor 9/13G XL and 9/13 G XL AIR
Gysmatic Truecolor 5/13G XXL and 5/13 G XXL AIR
In stock
Gys
Reference: 060753
(2 reviews)
€200.65
165,83 € tax excl.
or 3 x 66,88 €
Free delivery
2-year warranty
This TPT 40 plasma torch is compatible with GYS cutting machines: CUTTER 30 FV - EASYCUT 40 - CUTTER 45CT
Length: 4 m
Ignition voltage: 500V maximum
Maximum rated current: 40 A
Duty cycle at 40°: 40 A@60%
Torch cooling: Air
Recommended pressure/flow rate: 5 bar - 100 l/min
Switch characteristics: (trigger) 0.6A / 125V DC - 0.3A / 250V DC
In stock
Gys
Reference: 040199
(4 reviews)
€35.09
29,00 € tax excl.
Fast delivery
2-year warranty
Cutting carriage for plasma torch S25K / S35K / S45
In stock
Gys
Reference: 037984
(1 review)
€160.33
132,50 € tax excl.
or 3 x 53,44 €
Free delivery
2-year warranty
The compass kit allows you to quickly and precisely cut circles up to 82 cm in diameter.
- Ideal for making circular cuts between 40 and 82 cm in diameter.
- Magnetic centring guide for fast cuts on all ferrous surfaces.
- Screw-on centring guide for non-metallic materials.
- "Centre punch" centring guide for precise centring without perforating the sheet metal.
- Compatible with plasma torches MT-70 and MT-125 A
- Premium quality.
In stock
Gys
Reference: 040847
(1 review)
€3.79
3,13 € tax excl.
Fast delivery
2-year warranty
These inner lenses are compatible with the following Gys welding helmets:
Master 11
Expert 11
Promax
In stock
Gys
Reference: 042605
€3.53
2,92 € tax excl.
Fast delivery
2-year warranty
2 clear lenses + 1 shade 11 filter lens for flip-front welding helmet
Lens dimensions: 150 x 50 mm
In stock
Gys
Reference: AT-70
(2 reviews)
€680.63
562,50 € tax excl.
or 4 x 170,16 €
Free delivery
2-year warranty
Automatic plasma torch for plasma cutter at-70
Duty cycle: 50 A@100% - 65 A@60% - 70 A@50%
Switch (trigger) characteristics: 0.5 A / 48 VDC
Applied standard EN60974-7/2013
2 lengths available: 6 and 12 m.
Recommended pressure / flow rate:
6 m torch:
For cutting 20 and below 70 A: 5.0 bar - 185 l/min
12 m torch
For cutting 20 and below 70 A: 5.6 bar - 185 l/min
Before installing the torch, the generator must be switched off.
Supplied without consumables.
Product available on order only
| Combinations | Price | |
| €680.63 | ||
| €877.25 | ||
In stock
Gys
Reference: PANO
€12.26
10,13 € tax excl.
Fast delivery
2-year warranty
You will find below 2 useful references for replacing the protective screens of your GYS PANORAMIC 3XL welding helmet
Reference 037311
Including 3 outer visor screens
Reference 037304
Including 5 replacement sets for the central and side screens
| Combinations | Price | |
| €12.26 | ||
| €13.41 | ||
In stock
Gys
Reference: 040816
(6 reviews)
€5.45
4,50 € tax excl.
Fast delivery
2-year warranty
5 replacement lenses 110 x 90 mm external dimension for LCD filter protection - GYS welding helmet
These dimensions are suitable for GYS welding helmets, model:
LCD TECHNO 11 and LCD 9/13
LCD MASTER 11
FLIP-FLAP
LCD INVADER 11 TRUECOLOR
In stock
Gys
Reference: 061613
(1 review)
€140.15
115,83 € tax excl.
Free delivery
2-year warranty
This complete kit contains:
- 1 nozzle
- 1 diffuser
- 3 x 45 A nozzles
- 3 electrodes
- 1 deflector pad
This kit is compatible with the MT-70 torch model.
In stock
Gys
Reference: 037977
(1 review)
€79.65
65,83 € tax excl.
Fast delivery
2-year warranty
Replacement trolley for the MT70/125A compass kit
In stock
Gys
Reference: MT-70
(1 review)
€499.13
412,50 € tax excl.
or 4 x 124,78 €
Free delivery
2-year warranty
Torch for plasma cutter MT-70
This torch also allows gouging
Duty cycle: 50 A@100% - 65 A@60% - 70 A @ 50%
Switch (trigger) characteristics: 0.5 A / 48 VDC
Applied standard EN60974-7/2013
2 lengths available: 6 and 12 m.
Recommended pressure / flow rate:
6 m torch:
For cutting 20 and below 70 A: 5.0 bar - 185 l/min
For gouging: 5.0 bar - 185 l/min
12 m torch
For cutting 20 and below 70 A: 5.6 bar - 185 l/min
For gouging: 5.6 bar - 185 l/min
For torch installation, the power source must be switched off.
Supplied without consumables.
| Combinations | Price | |
| €499.13 | ||
| €601.98 | ||
In stock
Gys
Reference: 046825
(5 reviews)
€12.10
10,00 € tax excl.
Fast delivery
2-year warranty
10 replacement inner lenses 106 x 89.5 mm for the LCD filter protection of GYS welding helmets
This size is suitable for GYS LCD welding helmets, models:
GYSMATIC XXL Truecolor and GYSMATIC 5/13 AIR XXL Truecolor
In stock
Gys
Reference: 042780
(12 reviews)
€5.00
4,13 € tax excl.
Fast delivery
2-year warranty
1 GYS magnifying lens
Zoom x 2
Compatible with GYS welding helmets, model:
ZEUS : Indian - Fire - Cosmic
ERGOTECH : Silver - Black - Dream
SPACEVIEUW
ALLIEN True Color
In stock
Gys
Reference: 038653
(2 reviews)
€583.83
482,50 € tax excl.
or 4 x 145,96 €
Free delivery
2-year warranty
3-in-1 accessory, essential for making straight plasma cuts, cutting a chamfered edge or making highly precise circular cuts.
- 2 guide carriages with adjustment screws (torch tightening and support rotation lock).
- 1 compass kit ideal for circular cuts between 40 and 82 cm in diameter.
- Magnetic centering guide for fast cuts on all ferrous surfaces.
- Screw-on centering guide for non-metallic materials.
- "Centre punch" centering guide for precise centering without perforating the sheet metal.
- Compatible with MT-70 and MT-125 A plasma torches
- Premium quality.
In stock
Gys
Reference: 043695
(10 reviews)
€4.63
3,83 € tax excl.
Fast delivery
2-year warranty
5 replacement inner lenses 103.7 x 69.5 mm for LCD filter protection for GYS welding helmet
These dimensions are suitable for GYS welding helmets, model:
PRO+: Zeus and Ergotech
In stock
Gys
Reference: 043893
(26 reviews)
€12.96
10,71 € tax excl.
Fast delivery
2-year warranty
10 outer replacement lenses 114 x 133 mm for GYS LCD welding helmet filter protection
This size is suitable for GYS LCD welding helmets, models:
PRO+ Zeus and Ergotech
PANORAMIC Apollo
EXPERT: Spaceview
Gysmatic Truecolor 9/13G XL and 9/13 G XL AIR
Gysmatic Truecolor 5/13G XXL and 5/13 G XXL AIR
In stock
Gys
Reference: 040809
(1 review)
€3.98
3,29 € tax excl.
Fast delivery
2-year warranty
5 replacement internal lenses 103.6 x 54 mm for LCD filter protection for GYS welding helmet
These dimensions are suitable for GYS welding helmets, model:
PRO Expert and Hermes
In stock
Gys
Reference: 040793
(2 reviews)
€6.00
4,96 € tax excl.
Fast delivery
2-year warranty
5 replacement outer lenses 115 x 102 mm for LCD filter protection on GYS welding helmet
+
5 replacement outer lenses 111.5 x 91 mm for LCD filter protection on GYS welding helmet
These dimensions are suitable for the GYS welding helmet model:
PRO Expert and Hermes
In stock
Gys
Reference: buses 40
(4 reviews)
€50.22
41,50 € tax excl.
Fast delivery
2-year warranty
4 plasma torch nozzles, compatible with GYS Cutter 31, 40 FV, EasyCut 40 models, as well as the Cutter 35KF model with built-in compressor
| Combinations | Price | |
| €50.22 | ||
| €55.96 | ||
In stock
Gys
Reference: 040212
(8 reviews)
€33.18
27,42 € tax excl.
Fast delivery
2-year warranty
10 nozzles for GYS plasma cutter torch
Models Cutter 31 - 40 FV - Easycut 40 and the model with integrated compressor Cutter 35KF - 45 CT
In stock
Gys
Reference: 040168
(8 reviews)
€33.58
27,75 € tax excl.
Fast delivery
2-year warranty
10 medium electrodes for GYS plasma cutter torch
Models Cutter 31 - 40 FV - Easycut 40 as well as the model with integrated compressor Cutter 35KF - CUTTER 45 CT
In stock
Gys
Reference: 040175
(4 reviews)
€19.31
15,96 € tax excl.
Fast delivery
2-year warranty
2 diffusers for plasma cutter torch Gys models Cutter 31 or 40 FV and model with integrated compressor Cutter 35 KF
In stock
Gys
Reference: 037540
€170.40
140,83 € tax excl.
or 3 x 56,80 €
Free delivery
2-year warranty
This complete kit contains:
- 1 nozzle
- 1 diffuser
- 3 x 45 A nozzles and 3 x 70 A nozzles
- 3 electrodes
- 1 deflector pad
It is compatible with the Gys Cutter 70 CT plasma cutter.
In stock
Gys
Reference: 040205
(7 reviews)
€99.83
82,50 € tax excl.
Fast delivery
2-year warranty
This compass kit for single-phase plasma torch is used with plasma cutters equipped with one of the plasma torch models below
MT25K - MT35K - TPT40 - Z
This kit also includes a wheeled trolley serving as a cutting guide.
This compass kit allows you to quickly and precisely cut circles up to 134 cm in diameter.
- Ideal for making circular cuts between 10 and 134 cm in diameter.
- Magnetic centring pin for fast cuts on all ferrous surfaces.
- Screw-in centring pin for non-metallic materials.
- "Centre punch" centring pin for precise centring without perforating the sheet metal.
In stock
Gys
Reference: 039964
(2 reviews)
€49.40
40,83 € tax excl.
Fast delivery
2-year warranty
This complete set contains:
- 1 nozzle
- 1 diffuser
- 3 contact tips
- 3 electrodes
It is suitable for the Gys Cutter 35 K plasma cutter
In stock
Gys
Reference: 039957
(13 reviews)
€59.50
49,17 € tax excl.
Fast delivery
2-year warranty
This complete kit contains:
- 1 nozzle
- 1 diffuser
- 3 nozzle tips
- 3 electrodes
It is compatible with the Gys Cutter 31 and 40 FV and Easycut 40 plasma cutters
Save 20%
In stock
Gys
Reference: 060692B
€99.83
€124.79
82,50 € tax excl.
Fast delivery
2-year warranty
Keeps electrodes at the ideal temperature of 120°C
Electrode capacity 450mm: 5kg
Power supply: 230V
Power: 238 W
Lightweight at 3.2kg
Storage temperature: 50 - 200°C
Dimensions: 610x188x168mm
Supplier stock
Gys
Reference: 039148
€42.35
35,00 € tax excl.
Fast delivery
2-year warranty
1 diffuser 105/125 A for plasma torch AT-125 - MT 125
In stock
Gys
Reference: 084117
€282.23
233,25 € tax excl.
or 3 x 94,08 €
Free delivery
2-year warranty
Save 10%
In stock
Gys
Reference: 062054
(8 reviews)
€755.40
€839.33
624,32 € tax excl.
or 4 x 188,85 €
Free delivery
2-year warranty
Ultra-compact and designed for craftsmen, the PROTIG 161 DC HF (160 A) delivers high-quality welds on mild and stainless steels thanks to its advanced secondary regulation. Its intuitive interface makes parameter adjustment straightforward.
OPTIMISED DC WELDING
Secondary regulation: ensures optimal arc stability and constant current in all positions.
TG DC: ensures quality welding on all ferrous materials such as steel, stainless steel, but also copper and its alloys…
TIG DC Pulsed: controls the temperature of the weld pool, limits distortion and thus allows the joining of thin sheets from 0.3 mm.
SPOT: fast and precise tacking before welding thin sheets.
2 ignition types: HF non-contact or LIFT contact for electrosensitive environments.
3 trigger modes: 2T, 4T and 4T LOG.
Automatic torch detection: compatible with blade and double-button torches
MMA WELDING
MMA: Basic and Rutile electrodes (up to Ø 4 mm)
Pulsed MMA: facilitates upward vertical position welding (pipes/pipeline…)
3 integrated welding aids:
- Antisticking: reduces the risk of electrode sticking upon contact with the workpiece
- Hot Start: facilitates arc ignition and is adjustable in seconds depending on the metal type
- Arc Force: temporary current increase in difficult welding situations.
INTUITIVE
Current and voltage display during and after welding (WPS/WPQR).
Memorisation of 10 programs per process for perfect reproducibility of your welds.
Intelligent fan management to reduce power consumption, dust intake and machine noise.
→ Supplied with:
1 TIG torch SR17 DB - 4 m, + accessories *
1 electrode holder and earth clamp with 25 mm² section cable, length 2 m.
* 1 electrode holder Ø 1.6 and 2.4 mm
1 diffuser for electrode Ø 1.6 and 2.4 mm
1 ceramic nozzle GR7 and GR5
1 long cap and 1 short cap
This product is Euro Welding's choice
In stock
Gys
Reference: 033160
(122 reviews)
€491.22
406,00 € tax excl.
or 4 x 122,81 €
- Last transformer welder
- Robust and powerful
- Weld with and without gas
Free delivery
2-year warranty
Portable welding unit with electrical transformer
Ideal for craftsmen and home users
Designed to weld steel, stainless steel and aluminum in non-intensive use
Setting assistance thanks to the SMART table
Duty cycle: 115A@20% - 40°C
Current range: 30 to 160A
Combines 2 processes:
- MIG/MAG for workshop welding wire Ø 0.6 to 1 mm
- NO GAS for outdoor welding flux-cored wire Ø 0.9 and 1.2 mm
2-roll wire feeder for Ø100 mm spool (1 kg) and Ø200 mm (5 kg)
Detachable 150A 2.2 m torch (0.8 mm contact tip)
Single-phase 230 V - 16 A power supply
Protection rating: IP21
Dimensions: 33 x 54 x 45 cm - 30.5 kg
Supplied with:
- 1x Ground clamp (1.6 m cable / 16 mm²)
- 1x Contact tip Ø 6 mm - M6
- 2x Contact tips Ø 8 mm - M6
- 1x Removal key for contact tips
- 1x Gas hose + 2 clamps
- 2x Bottle fixing straps
Supplier stock
Gys
Reference: 064720
€329.73
272,50 € tax excl.
or 4 x 82,43 €
Free delivery
2-year warranty
This complete kit IS suitable for the Gys Cutter 125 CT plasma torch
In stock
Gys
Reference: 084131
€195.62
161,67 € tax excl.
or 3 x 65,21 €
Free delivery
2-year warranty
GYS TIG PRO 17 Torch - Air - 8m - 35/50 +AMPH.7
Supplier stock
Gys
Reference: 039445
€90.75
75,00 € tax excl.
Fast delivery
2-year warranty
GYS | Ohmic detection nozzle 105/125 A
Supplier stock
Gys
Reference: 039155
€42.35
35,00 € tax excl.
Fast delivery
2-year warranty
5 electrodes 45/125 A for plasma torch MT-125 / AT-125
In stock
Gys
Reference: 084162
€221.83
183,33 € tax excl.
or 3 x 73,94 €
Free delivery
2-year warranty
DC duty cycle 180 A at 35%.
AC 150 A at 35%.
Air cooling.
Recommended electrode diameter 1.6> 4.0 mm.
Original single-button module.
Cable assembly length 4 m.
Torch weight.
4 m (2.7 kg) or 8 m (on request 4.9 kg).
Lightweight and easy-to-handle torch.
Optional mesh diffuser to ensure uniform gas distribution.
Universal connector (Ø 35/50 mm Amphenol).
Supplier stock
Gys
Reference: 039308
€24.20
20,00 € tax excl.
Fast delivery
2-year warranty
1 cutting deflector shield 105/125 A for plasma torch AT-125
Supplier stock
Gys
Reference: 038479
€634.25
524,17 € tax excl.
or 4 x 158,56 €
Free delivery
2-year warranty
GYS AT-125 6M plasma torch
Supplier stock
Gys
Reference: 039193
€32.27
26,67 € tax excl.
Fast delivery
2-year warranty
5 cutting nozzles 105 A for plasma torch MT-125 / AT-125
In stock
Gys
Reference: 084179
€282.14
233,17 € tax excl.
or 3 x 94,05 €
Free delivery
2-year warranty
Duty cycle DC 180 A at 35%.
AC 150 A at 35%.
Air cooling.
Recommended electrode diameter 1.6> 4.0 mm.
Original single-button module.
Cable length 4 m
Torch weight
4 m (2.7 kg) or 8 m (on request 4.9 kg)
Lightweight and easy-to-handle torch.
Optional mesh diffuser to ensure a
uniform gas distribution.
Universal connector (Ø 35/50 mm Amphenol).
Supplier stock
Gys
Reference: 079304
(1 review)
€988.17
816,67 € tax excl.
or 4 x 247,04 €
Free delivery
2-year warranty
The PROTIG 231 DC FV is a pulsed DC TIG welding generator, very compact and portable. Its PFC technology allows it to operate from 85 V to 265 V and to achieve a very stable arc even on 100 m site extension leads. In electrode welding, its Pulsed MMA mode facilitates vertical upward welding.
OPTIMISED DC WELDING
Secondary regulation: ensures optimal arc stability and constant current in all positions.
- TIG DC: provides quality welding on all ferrous materials such as steel, stainless steel as well as copper and its alloys.
- Pulsed TIG DC up to 2 kHz: controls the temperature of the weld pool, limits deformation and enables assembly of thin sheets from 0.3 mm.
- Adjustable SPOT from 0.1 to 25 sec: fast and precise tacking before welding thin sheets.
- 2 arc starting types: HF contactless or LIFT by contact for electrosensitive environments.
- 3 trigger modes: 2T, 4T and 4T LOG. Automatic torch detection: compatible with blade, dual-button and potentiometer torches
- 2 tacking modes: - Spot: adjustable tacking from 0.1 to 60 seconds of parts before welding.
- Pulse: adjustable tacking from 0.01 to 60 seconds on thin sheet before welding
MMA WELDING
MMA: Basic and Rutile electrodes (up to Ø 5 mm).
Pulsed MMA: facilitates vertical upward welding (pipes/pipeline…).
3 integrated welding aids:
- Antisticking: reduces the risk of electrode sticking on contact with the workpiece
- Hot Start: facilitates arc striking and is adjustable in seconds depending on the metal type
- Arc Force: momentary current increase in difficult welding situations.
MAXIMUM PRODUCTIVITY
Advanced secondary regulation for optimal arc stability and constant current in all positions.
Storage of up to 50 programs per process for repetitive tasks.
Advanced menu for optimal welding control.
Current and voltage display during and after welding (DMOS/QMOS). Automatic torch detection: compatible with blade, dual-button, potentiometer and Up&Down torches.
Remote controls (foot pedal or manual, optional) connectable without tools.
VRD activatable via an internal switch to lower the no-load output voltage to < 35 V.
Intelligent fan management to reduce power consumption, dust intake and unit noise.
IDEAL ON SITE
Accepts extension leads up to 100 m.
Reinforced body and anti-shock pads.
Compact and easy to move on site.
Protected against overvoltages up to 400 V (PROTEC 400)
In stock
Gys
Reference: 084124
€140.36
116,00 € tax excl.
Free delivery
2-year warranty
Duty cycle DC 140 A at 35 %.
AC 125 A at 35 %.
Air cooling
Recommended electrode Ø 1.6> 4.0 mm.
Original single-button module.
Cable assembly length 4 m
Torch weight
4 m (2.7 kg)
Lightweight and easy-to-handle torch
Optional mesh diffuser for uniform gas distribution
Universal connector (Ø 35/50 mm Amphenol)
Supplier stock
Gys
Reference: 082786
(2 reviews)
€1,104.13
912,50 € tax excl.
or 4 x 276,03 €
Free delivery
2-year warranty
Facilitates vertical welding
Outdoor use IP23
High duty cycle: 175A at 60%
MMA and Lift TIG process
Current range: 5 to 200A
Welds steel, cast iron and stainless steel up to 10mm thick
Accepts Rutile, Basic, Stainless, Cast iron, Aluminum and Cellulosic electrodes (up to Ø 5 mm)
Technologies: Hot Start, Arc Force, Anti-Sticking, PFC, Protec 400
Power supply: 230 Volts 50/60 Hz - 16A -
Storage of 10 programs per process
Open circuit voltage: 96 V
Weight: 5.5 kg - 2-year warranty
Delivered without accessories
In stock
Gys
Reference: 062009
(2 reviews)
€1,002.28
828,33 € tax excl.
or 4 x 250,57 €
Free delivery
2-year warranty
Robust, the PROTIG 200 DC HF delivers high-quality welds on mild and stainless steels (TIG and MMA).
Designed for pipe fitters, boilermakers and maintenance departments, it features an intuitive interface allowing easy parameter adjustment.
Main features of this machine
1) in TIG mode.
TIG DC: DC welding for ferrous materials.
TIG DC Pulsed: limits heat build-up in the workpieces.
SPOT: fast and precise tacking before welding thin sheet metal.
2 ignition types: HF contactless or LIFT by contact for electrically sensitive environments.
3 trigger modes: 2T, 4T and 4T LOG. Automatic torch detection: compatible with lamella and double-button torches.
AIP (Adjust Ideal Position): assists with torch positioning before welding (4T & 4T LOG modes)
2) in MMA welding (coated electrodes)
MMA: basic and rutile electrodes (up to Ø 5 mm).
MMA Pulse: developed for welding pipes/pipelines as well as for vertical upward welding positions.
Delivered with:
A TIG torch type 26, length 4 m
An electrode holder and a ground clamp: cable length 2 m - section 25 mm²
In stock
Gys
Reference: 084094
€199.65
165,00 € tax excl.
or 3 x 66,55 €
Free delivery
2-year warranty
This GYS TIG PRO 9 brand torch has a 13mm connector for connection to your welding machine. Length 4 M. Air cooling. Duty cycle 100A@35%. This torch fits in particular on 3 models of Gys Mult welding machines.
Gys
Reference: 070721
€54.45
45,00 € tax excl.
Fast delivery
2-year warranty
This complete kit contains: - 1 nozzle - 1 diffuser - 3 tips Ø0.9 mm - 3 electrodes. This kit is compatible with the TPT 25 torch model, notably found on the GYS Cutter 25K PFC plasma cutter.
Supplier stock
Gys
Reference: 079311
(1 review)
€1,230.17
1 016,67 € tax excl.
or 4 x 307,54 €
Free delivery
2-year warranty
The PROTIG 231 DC FV is a pulsed DC TIG welding generator, very compact and portable. Its PFC technology allows it to operate from 85 V to 265 V and to achieve a very stable electric arc even on 100 m site extension cords. In stick welding, its Pulsed MMA mode facilitates vertical-up welds.
OPTIMIZED DC WELDING
Secondary regulation: ensures optimal arc stability and constant current in all positions.
- DC TIG: ensures quality welding on all ferrous materials such as steel, stainless steel but also copper and its alloys.
- Pulsed DC TIG up to 2 kHz: controls the temperature of the weld pool, limits distortion and allows the assembly of thin sheets from 0.3 mm.
- Adjustable SPOT from 0.1 to 25 sec: fast and precise tacking before welding thin sheets.
- 2 ignition types: HF non-contact or LIFT contact for electrosensitive environments.
- 3 trigger modes: 2T, 4T and 4T LOG. Automatic torch detection: compatible with blade, double-button and potentiometer torches
- 2 tacking modes: - Spot: adjustable tacking from 0.1 to 60 seconds before welding.
- Pulse: adjustable tacking from 0.01 to 60 seconds on thin sheet before welding
MMA WELDING
MMA: Basic and Rutile electrodes (up to Ø 5 mm).
Pulsed MMA: facilitates vertical-up welding (pipes/pipeline…).
3 integrated welding aids:
- Anti-sticking: reduces the risk of electrode sticking when in contact with the workpiece
- Hot Start: facilitates arc ignition and is adjustable in seconds depending on the metal type
- Arc Force: momentary increase in current in difficult welding situations.
MAXIMUM PRODUCTIVITY
Advanced secondary regulation for optimal arc stability and constant current in all positions.
Memory of up to 50 programs per process for repetitive tasks.
Advanced menu for optimal welding control.
Current and voltage display during and after welding (DMOS/QMOS) Automatic torch detection: compatible with blade, double-button, potentiometer and Up&Down torches.
Remote controls (foot pedal or manual, optional) connectable without tools.
VRD activatable via an internal switch to lower the no-load output voltage to < 35 V.
Intelligent fan management to reduce power consumption, dust intake and machine noise.
IDEAL ON SITE
Accepts extension cords up to 100 m.
Reinforced casing and anti-shock pads.
Compact and easily movable on site.
Protected against overvoltages up to 400 V (PROTEC 400)
delivered with
SR 26DB torch
25mm² 2m ground clamp
25mm² 2m electrode holder
In stock
Gys
Reference: 068742
(6 reviews)
€1,305.80
1 079,17 € tax excl.
or 4 x 326,45 €
Free delivery
2-year warranty
The PROTIG 200 AC/DC (200 A) is a versatile dual-process welding machine for TIG AC/DC and MMA (coated electrode) welding, in a compact and portable format. It allows joining all types of materials up to 4 mm thick (steel, stainless steel, aluminium, copper, magnesium or titanium). Its advanced secondary regulation ensures optimal arc stability and constant current in all positions.
5 TIG WELDING MODES
In DC mode
Standard DC: welding in direct current on the majority of ferrous materials.
Pulsed DC: limits heat build-up in the workpieces. Ideal for very thin sheet metal.
In AC mode
Pulsed AC: limits heat build-up in the workpieces. Ideal for very thin sheet metal.
AC Easy: simplifies use of the welding machine thanks to predefined parameters. The user only selects the diameter of their tungsten electrode on the interface.
OPTIMISED TIG SETTINGS
SPOT mode (TIG DC or AC): fast and precise tacking before welding thin sheet metal.
2 types of arc starting: HF contactless or LIFT by contact for electrically sensitive environments.
3 trigger modes: 2T, 4T and 4T LOG. Automatic torch detection: compatible with latching and dual-button torches.
MMA WELDING
MMA: Basic and Rutile electrodes (up to Ø 4 mm).
Pulsed MMA: facilitates vertical uphill welding (pipes/pipeline…).
3 integrated welding aids:
- Antisticking: reduces the risk of electrode sticking when in contact with the workpiece
- Adjustable Hot Start: facilitates arc striking and is adjusted in seconds according to the metal type
- Arc Force: momentary increase in current in difficult welding situations.
MAXIMUM PRODUCTIVITY
Memory for up to 30 programs per process.
Advanced menu for optimal welding control.
Current and voltage display during and after welding (DMOS/QMOS).
Reinforced casing with anti-shock pads.
Compact and easily movable on site.
Intelligent ventilation management to reduce power consumption, dust intake and machine noise.
Protected against overvoltages up to 400 V (PROTEC 400).
Delivered with:
1 TIG 26DB torch length 4 m, supplied with 1 Ø 1.6 electrode + 1 Ø 2.4 mm Cerium grey electrode (for stainless steel and steel welding) + A gas diffuser and an electrode holder for both tungsten electrode diameters + A GR5 ceramic nozzle and a GR7 ceramic nozzle
1 earth clamp + cable 25 mm² section length 2 m
1 electrode holder + cable 25 mm² section length 2 m
In stock
Gys
Reference: 086425
€41.75
34,50 € tax excl.
Fast delivery
2-year warranty
All-position welding
Uniform slag coverage
Low spatter level
Classification
AWS A5.20: E71T-GS
EN ISO 17632-A: T 42 Z W N 1 H15
Gys
Reference: 086593
(1 review)
€14.07
11,63 € tax excl.
Fast delivery
2-year warranty
Excellent arc ignition properties
High arc stability at elevated currents
Good wire corrosion resistance
All-position welding
DC + polarity
Save 20%
Supplier stock
Gys
Reference: 033993
€271.38
€339.22
224,30 € tax excl.
or 3 x 90,46 €
Free delivery
2-year warranty
Portable welding machine with electric transformer
Ideal for home users and maintenance work
Designed for assembling, repairing sheet metal or steel sections
Setting assistance via the SMART table
Duty cycle: 85A@6% - 40°C
Current range: 40 to 110A
Welding NO GAS only for flux-cored wire Ø 0.6 to 0.9 mm
2-roller wire feeder for Ø100 mm spool (1 kg)
Fixed torch 150A 2.2m (0.9mm contact tip)
Single-phase power supply 230 V - 16 A
Dimensions: 34 x 17 x 34 cm - 23.3kg
Supplied with:
- 1 earth clamp (cable 1.6 m / 16 mm²)
Save 10%
In stock
Gys
Reference: 068674
(49 reviews)
€125.04
€138.93
103,34 € tax excl.
Free delivery
2-year warranty
LCD WELDING MASK ERGOTECH DREAM
Essential for safety, the ERGOTECH 5-9/9-13 optoelectronic welding helmet protects the welder's face and eyes from UV, infrared and spatter. Fully automatic, the mask switches from clear to dark state in a fraction of a second, from the moment the arc is struck. Supplied with a Multifit + headband, it frees the welder's hands and provides all the comfort needed for welding work.
This welding helmet features TRUE COLOR technology
UV/IR protection level: DIN 15
Clear shade: 3
Shade: adjustable from 5-9 and 9-13 13
Classification: 1/1/1/1
Field of view: 100 x 67 mm
Reaction time: 0.08 ms
Number of sensors: 4
Return to clear time 0.15>0.8 sec
Adjustments: sensitivity, shade tester, delay, grinding
Power supply: solar + 2 CR 2032 batteries
Weight: 560 g
Standards: EN 175 / EN 379
Applications
MMA: 5 to 400 A
TIG: 5 to 300 A
MIG/MAG: 5 to 400 A
Grinding mode (Grind)
Replacement lenses:
Outer lens 114 x 133 mm (ref. 043893)
Inner lens 103.7 x 69.5 mm (ref. 043695)
Save 10%
Supplier stock
Gys
Reference: 063945
(8 reviews)
€1,802.90
€2,003.23
1 490,00 € tax excl.
or 4 x 450,73 €
Free delivery
2-year warranty
The PROTIG 201 AC/DC is the professional TIG welding solution for joining all types of materials up to 4 mm thick (steel, stainless steel, aluminium, copper or titanium).
It offers very high precision across many fields such as craftsmanship, maintenance or pipework.
Equipped with a water cooling unit, it allows the use of more ergonomic TIG torches.
6 TIG AC/DC welding processes
TIG DC: Ensures quality welding on all ferrous materials such as steel, stainless steel, but also copper and its alloys, titanium…
Pulsed TIG DC: Controls the temperature of the weld pool, limits distortion and thus allows the joining of thin sheets from 0.3 mm.
TIG DC Spot: Pre-assembles ferrous metal parts by tacking
TIG AC Easy: Simplifies the use of the welding unit through predefined parameters. The user only selects the diameter of their tungsten electrode on the interface
TIG AC Standard: Dedicated to welding aluminium and its alloys (Al, AlSi, AlMg, AlMn…). The alternating current ensures prior cleaning of the aluminium for a quality weld.
TIG AC Spot: Pre-assembles aluminium parts by tacking.
2 coated electrode welding modes
Standard MMA: Accepts basic and rutile electrodes up to Ø 4 mm
Pulsed MMA: Facilitates welding in the upward vertical position (pipes/pipeline...).
User assistance for the welder
2 ignition types: HF non-contact or LIFT for electrosensitive environments
3 trigger modes: - 2T: maintain pressure on the trigger throughout the weld.
- 4T: to start welding, hold the trigger once then press again to stop welding.
- 4T «LOG»: the operator can switch between 2 welding currents at any time with a brief trigger pulse (hot current and cold current)
MMA welding aids: - Antisticking: reduces the risk of electrode sticking upon contact with the workpiece
- Hot Start: facilitates arc ignition and is adjustable depending on the metal type
- Adjustable Arc Force: regulates arc length variations
VRD (voltage reduction device): welding current is only delivered when the electrode is in contact with the workpiece (not activated by default).
• Memorisation of up to 50 programs per process
• Connectivity for remote controls (foot pedal, manual remote control)
• Current/voltage display after welding (verification of WPS/WPQR compliance)
• Reinforced casing with anti-shock pads
Unit supplied with:
1 double-button torch SR26, length 4 m
1 earth clamp + cable, length 2 m
1 electrode holder
1 accessory kit
Save 20%
Supplier stock
Gys
Reference: 033153
€462.83
€578.54
382,50 € tax excl.
or 4 x 115,71 €
Free delivery
2-year warranty
Portable welding machine with electric transformer
Ideal for maintenance work
Designed for assembly, repair of sheet metal or profiles in steel and stainless steel
Duty cycle: 90A@20% - 40°C
Current range: 40 to 140A
Combines 2 processes:
- MIG/MAG for workshop welding wire Ø 0.6 – 0.8 mm
- NO GAS for outdoor welding flux-cored wire Ø 0.9 mm
2-roller wire feeder for spool Ø100 mm (1 kg) and Ø200 (5kg)
Fixed torch 150A 2.2m (0.8mm contact tip)
Single-phase power supply 230 V - 16 A
Dimensions: 24 x 42 x 38 cm - 22.6kg
Delivered with:
- 1 earth clamp (cable 1.6 m /16 mm2)
Supplier stock
Gys
Reference: 079328
€1,714.17
1 416,67 € tax excl.
or 4 x 428,54 €
Free delivery
2-year warranty
The PROTIG 231L DC PFC is a pulsed DC TIG welding generator with an integrated cooling unit. Its PFC technology allows it to operate from 195 V to 265 V and achieve a very stable arc even on 100 m site extension cords. In stick electrode welding, its Pulsed MMA mode facilitates vertical-up welding.
2 welding processes available with this unit:
-TIG DC
Standard DC: welding with smooth current on the majority of ferrous materials.
Pulsed DC up to 2 kHz: controls the temperature of the weld pool, limits distortion and enables the joining of thin sheets from 0.3 mm.
2 tacking modes:
- Spot: adjustable tacking from 0.1 to 60 seconds for parts before welding.
- Pulse: adjustable tacking from 0.01 to 60 seconds on thin sheet metal before welding.
2 arc starting types:
- HF non-contact
- LIFT contact start for electrosensitive environments. 3 trigger modes: 2T, 4T and 4T LOG.
Advanced secondary regulation for optimal arc stability and constant current in all positions.
Memory storage of up to 50 programs per process for repetitive tasks. Advanced menu for optimal welding control.
Current and voltage display during and after welding (DMOS/QMOS)
Automatic torch detection: compatible with blade-type, dual-button, potentiometer and Up&Down torches.
Remote controls (foot pedal or manual, optional) connectable without tools.
VRD activatable via an internal switch to lower the open-circuit output voltage to < 35 V.
Intelligent fan management to reduce power consumption, dust intake and machine noise.
MMA
Standard MMA: rutile and basic electrodes (up to Ø 5 mm).
Pulsed MMA up to 500 Hz: facilitates vertical-up position welding (pipe fittings/pipeline…)
Product highlights
Accepts extension cords up to 100 m.
Reinforced casing with anti-shock feet.
Compact and easy to move on site.
Protected against voltage surges up to 400 V (PROTEC 400).
Save 20%
In stock
Gys
Reference: 033184
€801.63
€1,002.04
662,50 € tax excl.
or 4 x 200,41 €
Free delivery
2-year warranty
Welding machine with electric transformer
Ideal for craftsmen
Designed to weld steel, stainless steel and aluminium in non-intensive use
Setting assistance thanks to the SMART panel
Duty cycle: 140A at 15%
Current range: 35 to 180A
Combines 2 processes:
- MIG/MAG for workshop welding wire Ø 0.6 to 1 mm
- NO GAS for outdoor welding flux-cored wire Ø 0.9 and 1.2 mm
2-roller wire feeder for spool Ø200mm (5kg) and Ø300mm (15kg)
Removable EURO torch 250A 3m (1.0mm contact tip)
Powerful 40W motor to ensure constant wire feeding
Can accept 4m³ gas cylinders
Single-phase power supply 230 V - 16 A
Compatible with 6kva generator
Dimensions: 39 x 80 x 70 cm - 48kg
Delivered with:
- 1 earth clamp 3 metres (cable 1.6 m /16 mm2)
- 1x Disconnectable torch 150A 3 metres
- 1x Gas hose + 2 clamps
Not included: accessory kit for MB15 torch - ref: 041226
Supplier stock
Gys
Reference: 062610
€2,515.80
2 079,17 € tax excl.
or 4 x 628,95 €
Free delivery
2-year warranty
The PROTIG 201L AC/DC represents the professional TIG welding solution for joining all types of materials up to 4 mm thick (steel, stainless steel, aluminum, copper or titanium).
It offers very high precision across many fields such as craftsmanship, maintenance or pipework.
Equipped with a water cooler, it allows the use of more ergonomic TIG torches
6 TIG AC/DC welding processes
DC TIG: Ensures quality welding on all ferrous materials such as steel, stainless steel as well as copper and its alloys, titanium…
Pulsed DC TIG: Controls the temperature of the weld pool, limits distortion and thus enables the assembly of thin sheets from 0.3 mm.
DC TIG Spot: Pre-assembles ferrous metal parts by tack welding
AC Easy TIG: Simplifies use of the welding machine thanks to predefined parameters. The user only selects their tungsten electrode diameter on the interface
Standard TIG: Dedicated to welding aluminum and its alloys (Al, AlSi, AlMg, AlMn…). Alternating current ensures prior cleaning of the aluminum for a quality weld.
AC TIG Spot: Pre-assembles aluminum parts by tack welding.
2 coated electrode welding modes
Standard MMA: Accepts basic and rutile electrodes up to Ø 4 mm
Pulsed MMA: Facilitates vertical upward welding (pipes/pipeline...).
Usage assistance for the welder
2 ignition types: HF contactless or LIFT for electrosensitive environments
3 trigger modes: - 2T: maintain pressure on the trigger throughout the weld.
- 4T: to start welding, hold the trigger once then press it again to stop welding.
- 4T "LOG": the operator can switch at any time between 2 welding currents with a brief trigger pulse (hot current and cold current)
MMA welding assistance: - Antisticking: reduces the risk of electrode sticking upon contact with the workpiece
- Hot Start: facilitates arc ignition and is adjustable according to metal type
- Adjustable Arc Force: regulates arc length variations
VRD (voltage reduction device): welding current is delivered only when the electrode is in contact with the workpiece (not activated by default).
• Storage of up to 50 programs per process
• Current/voltage display after welding (verification of WPS/PQR compliance)
and connectivity for remote controls (foot pedal, manual remote control)
Save 10%
In stock
Gys
Reference: 031432
(48 reviews)
€482.99
€536.66
399,17 € tax excl.
or 4 x 120,75 €
Free delivery
2-year warranty
Ideal and supremely powerful tool for the demanding professional
High duty cycle: 120A at 60% and 200A at 20%
Capable of welding 45 electrodes of Ø 3.2 mm in 1 hour
MMA and TIG Lift process
Current range: 10 to 200A
Welds steel, cast iron and stainless steel up to 10mm thickness
Electrode diameter: 1.6 to 5 mm
Technologies: Hot Start, Arc Force, Antisticking, PFC, ADS
Power supply: 230 Volts 50/60 Hz - 16A -
Open-circuit voltage: 96 V
Weight: 5.5 kg - 2-year warranty
Supplied in a case with:
1x Cable with ground clamp (1.6 meters) 25mm²
1x Cable with electrode holder (2 meters) 25mm²
Optional: TIG valve torch - 4m - 10/25mm² (087583)
Save 20%
Supplier stock
Gys
Reference: 078659
€1,269.49
€1,586.87
1 049,17 € tax excl.
or 4 x 317,37 €
Free delivery
2-year warranty
Compact three-phase generator for workshop and job sites
Welds steel, stainless steel and aluminium
MIG duty cycle: 170A at 60% / 130A at 100%
MMA duty cycle: 150A at 60% / 120A at 100%
Amperage range: 40 to 250A
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (steel/stainless wire Ø 0.6 to 1.2mm and Alu 0.9 to 1.2mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- MMA (basic and rutile electrode up to 5 mm) with Anti-stick function
4-roll wire feeder for Ø 200 mm (5 kg) or Ø 300 mm (15kg) spool
Removable 250A 3m MAG torch with 2T/4T function
Digital interface and very intuitive adjustment
Compatible with 10kva generator
Three-phase power supply 400 V - 16 A
Dimensions: 58 x 52x 32 cm - 32kg
IP23 rating for outdoor use
Delivered with:
1 x 250 A 3m MB25 torch
1 x 4m ground clamp
1x User manual
2x rollers 0.8/1.0
Save 10%
In stock
Gys
Reference: 029972
€206.71
€229.68
170,84 € tax excl.
or 3 x 68,90 €
Free delivery
2-year warranty
Ideal for hobbyists or professionals
Duty cycle: 45A at 60% and 40A at 100%
Current range: 10 to 130A
Welds steel, cast iron and stainless steel up to 8mm thick
Compatible with rutile, stainless steel, cast iron and basic stick electrodes
Electrode diameter: 1.6 to 3.2 mm
Technologies: Hot Start, Arc Force, Antisticking, PROTEC 400
Power supply: 230 Volts 50/60 Hz - 16A -
Open-circuit voltage: 72 V
Featherlight: 2.9kg - 2-year warranty
Delivered in a case with:
1x Cable with earth clamp (1.6 metres) 16mm² (10/25 mm² connector)
1x Cable with electrode holder (2 metres) 16mm² (10/25 mm² connector)
1x Shoulder strap
Save 20%
Supplier stock
Gys
Reference: 079274
€1,537.71
€1,922.13
1 270,83 € tax excl.
or 4 x 384,43 €
Free delivery
2-year warranty
Compact three-phase generator for workshop and job sites
Welds steel, stainless steel and aluminium
MIG duty cycle: 170A at 60% / 130A at 100%
MMA duty cycle: 150A at 60% / 120A at 100%
Current range: 40 to 320A
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (steel/stainless wire Ø 0.6 to 1.2mm and aluminium 0.8 to 1mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- MMA (basic and rutile electrode up to 6 mm) with Antisticking function
4-roller wire feeder for spool Ø 200 mm (5 kg) or Ø 300 mm (15kg)
Removable MAG torch 250A 3m with 2T/4T function
Digital interface and very intuitive adjustment
Compatible with 10kva generator
Three-phase power supply 400 V - 16 A
Dimensions: 65 x 52 x 34 cm - 38kg
IP23 rating for outdoor use
Delivered with:
1 x 360 A torch 4m MB36
1 x 400 Amp earth clamp 4m
1x User manual
2x 1.0/1.2 mm wire feed rollers
Supplier stock
Gys
Reference: 084902
€230.90
190,83 € tax excl.
or 3 x 76,97 €
Free delivery
2-year warranty
Robust and versatile
Duty cycle: 75A at 60% and 65A at 100%
MMA and TIG Lift process
Current range: 10 to 160A
Welds steel, cast iron and stainless steel up to 10mm thick
Compatible with rutile, stainless steel, cast iron and basic stick electrodes
Electrode diameter: 1.6 to 4 mm
Technologies: Hot Start, Arc Force, Antisticking
Power supply: 230 Volts 50/60 Hz - 16A -
Open-circuit voltage: 65 V
Weight: 3kg - 2-year warranty
Delivered in a case with:
1x Cable with earth clamp (1.6 metres) 16mm² (10/25 mm² connector)
1x Cable with electrode holder (1.6 metres) 16mm² (10/25 mm² connector)
Optional: TIG torch with valve - 4m (044425)
Save 10%
Gys
Reference: 037236
(16 reviews)
€206.71
€229.68
170,84 € tax excl.
or 3 x 68,90 €
Free delivery
2-year warranty
LCD WELDING MASK
Essential for safety, the GYSMATIC TRUE COLOR XXL optoelectronic welding helmet protects the welder's face and eyes from UV, infrared and spatter. Fully automatic, the mask switches from the clear state to the tinted state in a fraction of a second, from the moment the arc is struck. Supplied with a headband, it frees the welder's hands and provides all the comfort needed for welding work.
UV/IR protection level: DIN 15
Shade: adjustable from 5 to 13 - True Color Technology
Classification: 1/1/1/1
Viewing area: 100 x 83 mm
Reaction time: 0.10 ms
Settings: sensitivity, shade, delay, memory
Power supply: solar + 2 CR 2450 batteries
Weight: 680 g
Standards: EN 175 / EN 379
Applications
MMA: 5 to 400 A
TIG: 2 to 250 A
MIG/MAG: 5 to 400 A
Grinding mode (Grind)
Consumables:
Outer lens 114 x 133 mm (reference 043893)
Inner lens 106 x 89.5 mm (reference 046825)
Save 20%
In stock
Gys
Reference: 086548
€21.78
€27.23
18,00 € tax excl.
Fast delivery
2-year warranty
Filler metal for welding aluminium-magnesium alloys.
Classification:
AWS A5.10: ER5356
EN ISO 18273: S Al 5356 AlMg5Cr(A)
DIN 1732: SG AlMg 5
Applications:
Shipbuilding, railway, tipper and trailer construction.
Supplier stock
Gys
Reference: 083554
€332.75
275,00 € tax excl.
or 4 x 83,19 €
Free delivery
2-year warranty
Duty cycle: 95A at 60% and 80A at 100%
MMA and TIG Lift process
Current range: 15 to 180A
Welds steel, cast iron and stainless steel up to 10mm thick
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 4 mm
Technologies: Hot Start, Arc Force, Antisticking
Power supply: 230 Volts 50/60 Hz - 16A -
Open circuit voltage: 64 V
Weight: 3.7kg - 2-year warranty
Delivered in a case with:
1x Cable with earth clamp (1.6 metres) 16mm2 (10/25 mm2 connector)
1x Cable with electrode holder (2 metres) 16mm2 (10/25 mm2 connector)
Optional: Valve TIG torch - 4m (044425)
In stock
Gys
Reference: 065482
(3 reviews)
€1,198.90
990,83 € tax excl.
or 4 x 299,73 €
Free delivery
2-year warranty
Wheeled generator
Welds steel, stainless steel and aluminum
MIG duty cycle: 160A at 60% / 120A at 100%
MMA duty cycle: 140A at 60% / 100A at 100%
Amperage range: 30 to 220A
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (steel/stainless wire Ø 0.6 to 1 mm and aluminum 0.8 to 1 mm)
- MIG/MAG gasless (flux-cored wire Ø 0.9 to 1.1 mm)
- MMA (basic and rutile electrodes up to 5 mm) with Anti-stick function
4 drive rolls for Ø 200 mm (5 kg) or Ø 300 mm (15 kg) spools
Removable 250A MAG torch (2T/4T) 3 m (8 mm contact tip)
Digital interface with highly intuitive settings
Compatible with 9 kVA generator
Gas cylinder support for cylinders up to 4 m³
Single-phase 230 V - 16 A power supply
Dimensions: 77 x 79 x 47 cm - 32 kg
IP23 rating for outdoor use
Accepts long extension cords (100 m)
Included in the box:
1x 250A torch 3 m
1x ground clamp 2.5 m 25 mm²
1x electrode holder 2.5 m 25 mm²
User manual included
Supplier stock
Gys
Reference: 084919
€351.90
290,83 € tax excl.
or 4 x 87,98 €
Free delivery
2-year warranty
EURO-WELDING offers you this GYS pack including:
- 1 X GYSTEC 180LA welding machine
- 1 X Techno 11 welding helmet
Supplier stock
Gys
Reference: 032255
(2 reviews)
€680.63
562,50 € tax excl.
or 4 x 170,16 €
Free delivery
2-year warranty
Welds steel, stainless steel and aluminium for occasional use
MIG duty cycle: 160A@ 20%-40°C
MMA duty cycle: 140A@ 20%-40°C
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (solid wire Ø 0.6 to 0.8 mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 mm)
- MMA (electrode Ø 1.6 to 2.5 mm) with Anti-sticking function
2-roller wire feeder for Ø 100 mm (1 kg) or Ø 200 mm (5 kg) spool
Removable 150A MAG torch 2.20 m
Digital interface and very intuitive adjustment
Compatible with 8kVA generator
Single-phase power supply 230 V - 16 A
Dimensions: 40 x 20 x 33 cm - 10 kg
Supplied with:
- 1 earth clamp + 16 mm² cable length 1.6 m
- 1 MIG/MAG torch length 2.20 m fitted with a contact tip for steel wire Ø 0.8 mm
- 1 reversible roller for solid wire Ø 0.8 and gasless 0.9 mm
- 1 electrode holder + 16 mm² cable length 1.6 m
- 1 no-gas nozzle + 1 contact tip for flux-cored wire Ø 0.9 mm
- 1 gas hose for refillable cylinder length 1 m
- 1 wrench to loosen contact tips
In stock
Gys
Reference: 037281
(2 reviews)
€271.25
224,17 € tax excl.
or 3 x 90,42 €
Free delivery
2-year warranty
Essential for safety, the PANORAMIC 3 XL optoelectronic welding helmet protects the welder's face and eyes from UV, infrared, and spatter. Fully automatic, the mask switches from clear to shaded state in a fraction of a second, from the moment the arc is struck. Delivered with a headband, it frees the welder's hands and provides all the comfort needed for welding work.
UV/IR protection level: DIN 15
Shade: adjustable from 4 to 12 - True Color Technology
Classification: 1/1/1/1
Viewing area: 131 x 84 mm + 2x (67 x 75 mm) – Panoramic vision
Reaction time: 0.15 ms
Adjustments: sensitivity, shade, delay, memory
Power supply: solar + 2 CR 2450 batteries
Weight: 610 g
Standards: EN 175 / EN 379
Applications
MMA: 5 to 400 A
TIG: 2 to 250 A
MIG/MAG: 5 to 400 A
Grinding mode (Grind)
Consumables:
Outer lens 385 x 150 mm (ref. 037311)
Panoramic inner lens (ref. 037304)
Supplier stock
Gys
Reference: 084926
€368.05
304,17 € tax excl.
or 4 x 92,01 €
Free delivery
2-year warranty
Duty cycle: 100A at 60% and 90A at 100%
MMA and TIG Lift process
Current range: 15 to 200A
Welds steel, cast iron and stainless steel up to 10mm thick
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 5 mm
Technologies: Hot Start, Arc Force, Antisticking
Power supply: 230 Volts 50/60 Hz - 16A -
Open circuit voltage: 64 V
Weight: 3.7kg - 2-year warranty
Delivered in a case with:
1x Cable with earth clamp (3 metres) 16mm2 (10/25 mm2 connector)
1x Cable with electrode holder (3 metres) 16mm2 (10/25 mm2 connector)
Optional: Valve TIG torch - 4m (044425)
In stock
Gys
Reference: 073685
€7.96
6,58 € tax excl.
Fast delivery
2-year warranty
Stainless Steel Electrodes 316L - D1.6 mm - L 300 mm
Welds stainless steel 316L/308L/304L
Electrode diameter: 1.6 mm
Weldable thickness: 1.5 mm
Welding power setting: 40 to 70 A
Multiple positions (except downhand)
Good-looking bead appearance
Good slag detachment
Connect electrode holder to + terminal of the welder
Arc striking from 40V
Classification:
EN 1600: 19123 LR12
AWS 5.4: E 316L-16
In stock
Gys
Reference: 083608
€448.70
370,83 € tax excl.
or 4 x 112,18 €
Free delivery
2-year warranty
Duty cycle: 110A at 60% and 85A at 100%
MMA, MMA Pulse and TIG Lift process
Current range: 10 to 180A
Welds steel, cast iron and stainless steel up to 10mm thick
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 4 mm
Technologies: Hot Start, Arc Force, Antisticking, Pulse, P400, PFC and ADS
Power supply: 230 Volts 50/60 Hz - 16A -
Open circuit voltage: 64 V
Weight: 5.9kg - 2-year warranty
Delivered in a case with:
1x Cable with earth clamp (3 metres) 16mm2 (10/25 mm2 connector)
1x Cable with electrode holder (3 metres) 16mm2 (10/25 mm2 connector)
Optional: Valve TIG torch - 4m (044425)
Supplier stock
Gys
Reference: 061828
€1,794.83
1 483,33 € tax excl.
or 4 x 448,71 €
Free delivery
2-year warranty
The PROTIG 201 AC/DC represents the professional TIG welding solution for joining all types of materials up to 4 mm thick (steel, stainless steel, aluminium, copper or titanium).
It offers very high precision in many fields such as craftsmanship, maintenance or pipework.
Equipped with a water cooling unit, it allows the use of more ergonomic TIG torches
6 TIG AC/DC welding processes
TIG DC: Ensures quality welding on all ferrous materials such as steel, stainless steel, as well as copper and its alloys, titanium…
Pulsed TIG DC: Controls the temperature of the weld pool, limits deformation and thus allows the joining of thin sheets from 0.3 mm.
TIG DC Spot: Pre-assembles ferrous metal parts by tack welding
TIG AC Easy: Simplifies the use of the welding unit thanks to predefined parameters. The user only selects the diameter of their tungsten electrode on the interface
TIG Standard: Dedicated to welding aluminium and its alloys (Al, AlSi, AlMg, AlMn…). Alternating current ensures preliminary cleaning of the aluminium for a quality weld.
TIG AC Spot: Pre-assembles aluminium parts by tack welding.
2 stick electrode welding modes
MMA Standard: Accepts basic, rutile electrodes up to Ø 4 mm
Pulsed MMA: Facilitates vertical up-position welding (pipe fittings/pipeline...).
User assistance for the welder
2 arc ignition types: HF non-contact or LIFT for electrosensitive environments
3 trigger modes: - 2T: maintain pressure on the trigger throughout the weld.
- 4T: to start welding, hold the trigger once then press again to stop welding.
- 4T "LOG": the operator can switch between 2 welding currents at any time with a brief pulse on the trigger (hot current and cold current)
MMA welding assistance: - Anti-sticking: reduces the risk of electrode sticking when in contact with the workpiece
- Hot Start: facilitates arc striking and can be adjusted according to the type of metal
- Adjustable Arc Force: regulates arc length variations
VRD (voltage reduction device): welding current is delivered only when the electrode is in contact with the workpiece (not activated by default).
• Memory for up to 50 programs per process
• Connectivity for remote controls (foot pedal, manual remote control)
• Current/voltage display after welding (verification of compliance with WPS/WPQR)
• Reinforced casing and anti-shock pads
Unit delivered without accessories
Supplier stock
Gys
Reference: 082762
€1,194.88
987,50 € tax excl.
or 4 x 298,72 €
Free delivery
2-year warranty
Three-phase MMA / TIG DC Lift generator
Duty cycle: 300A @ 60%
Current range: 20 - 300 A (400V)
Welds cellulosic, aluminium, rutile, basic, stainless steel, cast iron electrodes up to Ø 6 mm
Arc gouging with carbon electrode (up to Ø 5 mm)
Robust and easy to adjust with digital display
IP23 for outdoor use
Reinforced housing
Technologies: Arc Force, Hot Start, Anti Stick, SR and VRD
Open circuit voltage 83V
Weight: 26kg
2-year warranty
Delivered without accessories
Save €80.00
Supplier stock
Gys
Reference: PGPT201ACDCA
(1 review)
€2,216.98
€2,296.98
1 832,21 € tax excl.
or 4 x 554,25 €
Free delivery
2-year warranty
This pack includes 4 products:
- 1 GYS PROTIG 201 AC DC TIG welder, HF ignition + 4 m torch and earth clamp 08742
- 1 rechargeable gas cylinder of 2.3 m3 without contract SOL Indus pure argon
- 1 column pressure regulator
By choosing this pack, you save €80 on purchase.
In stock
Gys
Reference: 032903
(7 reviews)
€1,512.50
1 250,00 € tax excl.
or 4 x 378,13 €
Free delivery
2-year warranty
SEMI-AUTOMATIC WELDING MACHINE (MIG/MAG)
Ideal for maintenance and automotive body repair work.
Adjustment range from 15 to 160A
For wire diameter 0.6 to 1mm: steel, stainless steel and aluminium
Simple and fast adjustment: in synergic mode, the machine automatically sets the ideal wire speed.
Expandable, it can be fitted with a spool gun torch
3 available modes:
Standard (2T).
- Spot, plug welding function.
- Delay, stitch point function.
Delivered with:
1 150A torch length 3 m, fitted with a Ø 0.8 mm contact tip.
1 200 A earth clamp cable length 3 m
1 reversible roller for steel wire Ø 0.6/0.8 mm.
In stock
Gys
Reference: 083967
(1 review)
€1,709.13
1 412,50 € tax excl.
or 4 x 427,28 €
Free delivery
2-year warranty
The PROTIG 230 AC/DC FV is a high-performance, compact and portable TIG AC/DC and MMA welding machine, ideal for demanding work on site as well as in the workshop.
It can weld all types of materials up to 4 mm thick: steel, stainless steel, aluminum, copper, magnesium, titanium, etc. Thanks to its PFC technology, it operates over a wide voltage range (85 V to 265 V) and guarantees a stable electric arc, even with a 100-meter extension cord.
5 TIG welding modes:
- DC Standard: for ferrous metals
- Pulsed DC: limits heat buildup, perfect for thin sheets
- AC Standard: for aluminum and its alloys
- Pulsed AC: ideal for thin aluminum
- AC Easy: simplified mode with automatic settings (electrode diameter selection only)
Advanced TIG functions:
- SPOT mode: quick tacking before welding
- HF or LIFT ignition: to adapt to all environments
- Trigger controls: 2T, 4T and 4T LOG
- Automatic torch detection: compatible with flex-head and double-button torches
- Compatible with basic and rutile electrodes up to Ø4 mm
- Pulsed MMA: ideal for vertical welding (e.g.: pipework)
Integrated aids:
- Adjustable Hot Start: easier arc ignition
- Arc Force: temporary current boost for difficult welds
- Antisticking: prevents electrode sticking
Designed for productivity
- Up to 30 memorizable programs per process
- Advanced menu for precise control
- Current/voltage display during and after welding (DMOS/QMOS)
- Reinforced chassis with anti-shock pads
- Compact and easy to transport
- Smart fan: reduces power consumption, noise and dust
- Overvoltage protection up to 400 V (PROTEC 400 technology)
In stock
Gys
Reference: 013360
€291.40
240,83 € tax excl.
or 3 x 97,13 €
Free delivery
2-year warranty
Delivered as a pack with:
- 1 GYSMI 160A welder
- 1 Carrying strap
- 1 16 mm² cable kit and 1.6m earth clamp
- 1 16 mm² cable kit and 1.6m electrode holder
- 1 TECHNO 11 TRUE COLOR LCD mask
- 1 Pair of split leather gloves (size 10)
Save 10%
In stock
Gys
Reference: 065109
(16 reviews)
€1,265.45
€1,406.06
1 045,83 € tax excl.
or 4 x 316,36 €
Free delivery
2-year warranty
Welds steel, stainless steel and aluminum from 0.6 to 6mm in all positions
MIG duty cycle: 130A at 60% / 110A at 100%
MMA duty cycle: 110A at 60% / 90A at 100%
TIG duty cycle: 135A at 60% / 115A at 100%
Current range: 20 to 200A - Voltage: 76V
Combines 4 welding processes in 1 product:
- MIG/MAG with gas (steel/stainless steel wire Ø 0.6/0.8 to 1.6 mm and aluminum 0.8 to 1.6mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- DC TIG Lift - Lift arc ignition
- MMA (basic and rutile electrode up to 5 mm)
4 drive rolls for spool Ø 200 mm (5 kg) or Ø 300 mm (15kg)
Removable STEEL MIG torch 250A 3m (8mm contact tip)
Digital interface and highly intuitive settings
Compatible with 9 kVA generator and 100m extension cord
Single-phase power supply 230 V - 16 A
Dimensions: 27.5 x 55 x 44 cm - 20kg
IP21 rating
Supplied with:
1x 250 A 3m torch MB25
1x 200A 2.5m ground cable
1x MMA electrode holder 2m
1x User manual
2x 0.8/1mm drive rolls
TIG torch optional
Save 10%
In stock
Gys
Reference: 065116
(10 reviews)
€1,502.42
€1,669.35
1 241,67 € tax excl.
or 4 x 375,61 €
Free delivery
2-year warranty
Welds steel, stainless steel and aluminium from 0.6 to 6mm in all positions
MIG duty cycle: 130A at 60% / 110A at 100%
MMA duty cycle: 110A at 60% / 90A at 100%
TIG duty cycle: 135A at 60% / 115A at 100%
Current range: 20 to 200A - Voltage: 76V
Combines 4 welding processes in 1 unit:
- MIG/MAG with gas (steel/stainless wire Ø 0.6/0.8 to 1.6 mm and Alu 0.8 to 1.6mm)
- MIG/MAG gasless (flux-cored wire Ø 0.9 to 1.2 mm)
- TIG Lift DC current - Lift Arc TIG starting
- MMA (basic and rutile electrodes up to 5 mm)
4 drive rolls for spool Ø 200 mm (5 kg) or Ø 300 mm (15kg)
Removable STEEL MIG torch 250A 3m (8mm contact tip)
Digital interface and very intuitive adjustment
Compatible with 9 kVA generator and 100m extension lead
Gas cylinder support included
Single-phase 230 V - 16 A power supply
Dimensions: 41 x 72 x 77 cm - 27kg
IP21 rating
Supplied with:
1 x 250 A torch 3m MB25
1 x 200 A earth clamp 2.5 m
1 x MMA electrode holder 2 m
2x 0.8 / 1.0 drive rolls
TIG torch optional
Supplier stock
Gys
Reference: 078635
€1,511.50
1 249,17 € tax excl.
or 4 x 377,88 €
Free delivery
2-year warranty
Ideal for locksmiths and maintenance workshops
Welds steel, stainless steel and aluminium
MIG duty cycle: 200A at 60% / 180A at 100%
MMA duty cycle: 200A at 60% / 180A at 100%
Current range: 40 to 250A
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (steel/stainless steel wire Ø 0.6/0.9 to 1.2 mm and aluminium 0.8 to 1mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- MMA (basic and rutile electrode up to 5 mm)
4 drive rolls for Ø 200 mm (5 kg) or Ø 300 mm (15kg) spool
Removable MAG torch 250A (2T/4T) 3m (8mm contact tip)
Digital interface with very intuitive adjustment
Compatible with 10kVA generator
Gas cylinder holder for cylinders up to 4m3
Three-phase power supply 400 V - 16 A
Dimensions: 77 x 79x 47 cm - 48kg
IP21 rating
Delivered with:
1 x 250 A MB25 torch 3m
1 x 200 Amp earth clamp 4m
1x User manual
2x 0.8/1 mm drive rolls
Supplier stock
Gys
Reference: 079335
€1,966.25
1 625,00 € tax excl.
or 4 x 491,56 €
Free delivery
2-year warranty
The PROTIG 231L DC PFC is a pulsed DC TIG welding generator with an integrated water cooling unit. Its PFC technology allows it to operate from 195 V to 265 V and achieve a very stable arc even on 100 m site extension leads. In stick electrode welding, its Pulsed MMA mode facilitates upward welding.
2 welding processes possible with this unit:
-TIG DC
DC Standard: welding with smooth current on the majority of ferrous materials.
Pulsed DC up to 2 kHz: controls the temperature of the weld pool, limits distortion and allows the joining of thin sheet metal from 0.3 mm.
2 tacking modes:
- Spot: adjustable tacking from 0.1 to 60 seconds for parts prior to welding.
- Pulse: adjustable tacking from 0.01 to 60 seconds on thin sheet metal prior to welding.
2 arc ignition types:
- HF non-contact
- LIFT by contact for electrically sensitive environments. 3 trigger modes: 2T, 4T and 4T LOG.
Advanced secondary regulation for optimal arc stability and constant current in all positions.
Memory storage of up to 50 programs per process for repetitive tasks. Advanced menu for optimal welding control.
Current and voltage display during and after welding (WPS/PQR)
Automatic torch detection: compatible with blade-type, dual-button, potentiometer and Up&Down torches.
Remote controls (foot pedal or manual, optional) connectable without tools.
VRD activatable via an internal switch to lower the open-circuit output voltage to < 35 V.
Intelligent fan management to reduce power consumption, dust intake and unit noise.
MMA
MMA Standard: rutile and basic electrodes (up to Ø 5 mm).
Pulsed MMA up to 500 Hz: facilitates vertical upward welding (pipe joints / pipeline…)
Product highlights
Accepts extension leads up to 100 m.
Reinforced casing and anti-shock feet.
Compact and easily portable on site.
Protected against overvoltages up to 400 V (PROTEC 400).
Unit delivered with:
1 SR20 DB torch 4 m long
1 earth clamp + cable section 25 mm² length 2 m
1 electrode holder + cable section 25 mm² length 2 m
In stock
Gys
Reference: 064997
(108 reviews)
€30.15
24,92 € tax excl.
Fast delivery
2-year warranty
Essential for safety, the TECHNO 11 TRUE COLOR optoelectronic welding helmet protects the welder's face and eyes from UV, infrared and spatter. Fully automatic, the mask switches from the clear state to the shaded state in a fraction of a second, from the moment of arc strike.
Supplied with a headband, it frees the welder's hands and provides all the comfort needed for welding work.
Welding helmet suitable for arc welding:
MMA (covered electrode) from 10 to 150 A
MIG-MAG (semi-automatic welding) from 10 to 200 A
TIG from 10 to 175 A
Fixed shade: dark shade DIN 11 – light shade DIN 3
Solar powered
Automatically switches from light shade to dark shade upon arc strike. Returns to the clear state as soon as the arc stops.
Viewing area 98 x 35 mm
Adjustable headband
Weight 420 g
Optical classification standard: 1/1/1/1
Compliant with standards EN 175B / EN 166 / EN 379
Supplier stock
Gys
Reference: 063952
(1 review)
€2,683.28
2 217,59 € tax excl.
or 4 x 670,82 €
Free delivery
2-year warranty
The PROTIG 201L AC/DC is the professional TIG welding solution for joining all types of materials up to 4 mm thick (steel, stainless steel, aluminium, copper or titanium).
It offers very high precision across many fields such as craftsmanship, maintenance and pipework.
Equipped with a water cooling unit, it allows the use of more ergonomic TIG torches
6 TIG AC/DC welding processes
TIG DC: Ensures quality welding on all ferrous materials such as steel, stainless steel, as well as copper and its alloys, titanium…
Pulsed TIG DC: Controls the temperature of the weld pool, limits distortion and thus enables the joining of thin sheet metal from 0.3 mm.
TIG DC Spot: Pre-assembles ferrous metal parts by tack welding
TIG AC Easy: Simplifies use of the welding machine thanks to predefined parameters. The user only selects the diameter of their tungsten electrode on the interface
TIG Standard: Dedicated to welding aluminium and its alloys (Al, AlSi, AlMg, AlMn…). Alternating current ensures preliminary cleaning of aluminium for a quality weld.
TIG AC Spot: Pre-assembles aluminium parts by tack welding.
2 coated electrode welding modes
MMA Standard: Accepts basic and rutile electrodes up to Ø 4 mm
Pulsed MMA: Facilitates vertical upward position welding (tubes/pipeline...).
Usage assistance for the welder
2 ignition types: HF contactless or LIFT for electrosensitive environments
3 trigger management modes: - 2-stroke: hold the trigger throughout the weld.
- 4-stroke: to start welding, hold the trigger once then press it again to stop welding.
- 4T "LOG": the operator can switch at any time between 2 welding currents with a brief trigger pulse (hot current and cold current)
MMA welding assistance: - Antisticking: reduces the risk of electrode sticking when in contact with the workpiece
- Hot Start: facilitates arc ignition and is adjustable according to metal type
- Adjustable Arc Force: regulates arc length variations
VRD (voltage reduction device): welding current is delivered only when the electrode is in contact with the workpiece (not activated by default).
• Memorization of up to 50 programs per process
• Current/voltage display after welding (verification of compliance with WPS/WPQR)
and Connectivity for remote controls (foot pedal, manual remote control)
Machine delivered with:
1 SR20 DB torch length 4 m
1 earth clamp + cable length 2 m
1 electrode holder + cable length 2 m
In stock
Gys
Reference: 065727
€543.50
449,17 € tax excl.
or 4 x 135,88 €
Free delivery
2-year warranty
The GYSMATIC 9/13 AIR TRUE COLOR XL is a welding mask equipped with a powered air purifying respiratory protection system. 2 in 1, it protects the eyes from IR/UV during welding operations and preserves the operator's airways.
• The XL lens provides an optimal field of view.
• True Color technology ensuring incredible colour accuracy during welding.
• The 5 available shades (9> 13) adapt to all welding operations. It allows TIG welding from as low as 5 A.
• The 4 solar sensors ensure very high sensitivity and an ultra-fast reaction time (0.08 ms).
• 3 adjustable airflow rates according to needs (from 170 l/min to 230 l/min).
• The lithium battery provides up to 8 hours of battery life.
• The TH2PRSL rated filter retains 99.996% of welding particles.
• Standards EN 166 / EN 175 / EN 379 / EN 12941.
• Supplied with respiratory protection system, lithium battery, EU charger, harness, flow meter.
Consumables:
- Pre-filter (ref. 038417)
- TH2 filter (ref. 038424)
- TH3 filter (ref. 065734)
In stock
Gys
Reference: 047846
(1 review)
€741.13
612,50 € tax excl.
or 4 x 185,28 €
Free delivery
2-year warranty
The GYSMATIC 5/13 AIR TRUE COLOR XXL is a welding mask equipped with a powered air-purifying respirator system. 2 in 1, it protects the eyes from IR/UV during welding operations and preserves the operator's respiratory tract.
• The XXL screen provides an optimal field of vision.
• True Color technology guaranteeing incredible color accuracy during welding.
• The 9 available shades (5> 13) adapt to all welding operations. It offers the possibility of TIG welding from 2 A.
• The 4 solar sensors guarantee very high sensitivity and an ultra-fast reaction time (0.08 ms).
• 3 adjustable airflow rates according to need (from 170 l/min to 230 l/min).
• The lithium battery allows up to 8 hours of autonomy.
• The filter rated TH2PRSL retains 99.996% of welding particles.
• Standards EN 166 / EN 175 / EN 379 / EN 12941.
• Supplied with powered air-purifying respirator system, lithium battery, EU charger, harness, flow meter and carry bag.
Save 10%
In stock
Gys
Reference: 030077
(134 reviews)
€226.87
€252.08
187,50 € tax excl.
or 3 x 75,62 €
Free delivery
2-year warranty
Powerful and versatile
Duty cycle: 85A at 60% and 70A at 100%
Current range: 10 to 160A
Welds steel, cast iron and stainless steel up to 10 mm thickness
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 4 mm
Technologies: Hot Start, Arc Force, Antisticking, PROTEC 400
Power supply: 230 Volts 50/60 Hz - 16A -
Open-circuit voltage: 72 V
Weight: 6 kg - 2-year warranty
Supplied in a case with:
1x Cable with ground clamp (1.6 meters) 16mm² (10/25 mm² connector)
1x Cable with electrode holder (2 meters) 16mm² (10/25 mm² connector)
1x Shoulder strap
Supplier stock
Gys
Reference: 062214
€17.94
14,83 € tax excl.
Fast delivery
2-year warranty
GYS Type A aluminium roller Ø 1.0/1.2
This product is Euro Welding's choice
Save 10%
In stock
Gys
Reference: 031425
(95 reviews)
€321.66
€357.40
265,83 € tax excl.
or 4 x 80,42 €
- Price drop
- MMA up to 180A
- Anti-stick
Free delivery
2-year warranty
Ultra powerful for professionals in workshop and maintenance
High duty cycle: 110A at 60% and 180A at 18%
MMA welding process
Current range: 10 to 180A
Welds steel, cast iron and stainless steel up to 10mm thickness
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 3.2 mm
Technologies: Hot Start, Arc Force, Antisticking, P400
Power supply: 230 Volts 50/60 Hz - 16A -
Open circuit voltage: 72 V
Weight: 5.1kg - 2-year warranty
Delivered in a case with:
1x Cable with ground clamp (1.6 metres) 16mm2 (10/25 mm2 connector)
1x Cable with electrode holder (2 metres) 16mm2 (10/25 mm2 connector)
Supplier stock
Gys
Reference: 061996
€4,688.92
3 875,17 € tax excl.
Free delivery
2-year warranty
The TITANIUM 230 AC/DC FV is a single-phase TIG AC/DC welding generator. Smart and connected, it offers extremely precise arc control and industrial welding performance up to 230 A (16 A fuse) thanks to its integrated power factor corrector. It combines excellent ergonomics and an exceptional user experience with advanced welding functions
6 TIG WELDING MODES
DC Standard: welding with smooth current on most ferrous materials.
DC Pulsed: allows parts to be assembled while limiting heat input (pulses up to 2.5 kHz).
FastPulse: pulses up to 20 kHz on special steels.
AC Standard: welding of aluminium and its alloys (Al, AlSi, AlMg, AlMn, etc.).
AC Pulsed: precise penetration control based on AC frequency setting (pulses up to 500 Hz).
AC Mix: alternating AC and DC current to increase welding speed
TIG WIZARD SOLUTION
Patented synergic mode for maximum productivity with tacking and welding of Aluminium, Steel, Stainless Steel and Copper parts with or without filler metal.
5 joint types: Butt (BW), Fillet (FW), Inside corner (BP), Outside corner and wire splicing.
Wizard Lab for performing complex welding cycles
OPTIMIZED SETTINGS
4 tacking modes:
- Spot / Multi Spot: traditional tacking prior to welding thin sheet metal.
- Tack / Multi Tack: ultra-precise, oxidation-free tacking reducing the risk of distortion.
3 arc ignition types: Lift, HF and Touch.HF (timed high-frequency ignition).
3 trigger modes: 2T, 4T and 4T LOG
AC waveform shaping settings for improved arc control and penetration.
E-TIG mode ensures the welder maintains the correct welding power regardless of the torch position relative to the workpiece (welding energy control).
MAXIMUM CONNECTIVITY
Precisely measured energy input.
Traceability of all weld beads in accordance with EN 3834 standard.
Welding accessory calibration mode (refines energy calculation).
Connectable via an optional kit (037960) for use on a robot.
User mode to share the product with multiple welders.
Free online tool available for interface customization.
Save, from a USB key, user JOBs (500 max.) as well as machine configuration.
Compatible with lamellar, double-button, potentiometer and Up & Down torches.
Complete machine and synergy update via USB key.
Remote controls (foot pedal or manual, optional) connectable without tools.
MMA, MMA AC and Pulsed MMA modes (electrodes weldable up to Ø 8 mm).
VRD (Voltage Reduction Device) activatable to lower the no-load output voltage to < 35 V.
"FV" technology guarantees a consistently stable electric arc even in the event of mains voltage variations (85 to 265 V), generator power supply or use of very long power cables.
In stock
Gys
Reference: 031210
(11 reviews)
€437.62
361,67 € tax excl.
or 4 x 109,41 €
Free delivery
2-year warranty
Professional performance & advanced technology
3 welding modes: MMA, MMA Pulse and TIG Lift DC
Duty cycle: 200A at 64%
Current range: 10 to 200A
Welds steel, cast iron and stainless steel up to 10mm thick
Compatible with rutile, stainless, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 5 mm
Technology: Hot Start, Arc Force, Anti-Sticking, MMA Pulse, TIG Lift, ADS and PFV
Power supply: 230 Volts 50/60 Hz - 16A -
Open circuit voltage: 96 V
Weight: 9kg - 2-year warranty
Delivered in a carrying case with:
1x Ground cable with clamp (1.6 metres) 16mm² (10/25 mm² connector)
1x Electrode holder cable (2 metres) 16mm² (10/25 mm² connector)
1x Shoulder strap
Optional: TIG torch with valve - 4m - 10/25mm² (044425)
Supplier stock
Gys
Reference: 086951
€4,402.15
3 638,17 € tax excl.
Free delivery
2-year warranty
The TITANIUM 230 AC/DC FV is a single-phase TIG AC/DC welding generator. Intelligent and connected, it offers extremely precise arc control and industrial welding performance up to 230 A (16 A fuse) thanks to its integrated power factor corrector. It combines excellent ergonomics and an exceptional user experience with advanced welding functions
6 TIG WELDING MODES
DC Standard: welding with smooth current on the majority of ferrous materials.
DC Pulsed: allows parts to be assembled while limiting heat input (pulses up to 2.5 kHz).
FastPulse: pulses up to 20 kHz on special steels.
AC Standard: welding of aluminium and its alloys (Al, AlSi, AlMg, AlMn, etc).
AC Pulsed: precise control of penetration according to the AC frequency setting (pulses up to 500 Hz).
AC Mix: alternation of AC and DC current to increase welding speed
TIG WIZARD SOLUTION
Patented synergic mode for maximum productivity with tacking and welding of Aluminium, Steel, Stainless Steel and Copper parts with or without filler metal.
5 joint types: Butt weld (BW), Fillet weld (FW), Inside corner (BP), Outside corner and wire splicing.
Wizard Lab for the creation of complex welding cycles
OPTIMISED SETTINGS
4 tacking modes:
- Spot / Multi Spot: traditional tacking before welding thin sheet metal.
- Tack / Multi Tack: ultra-precise tacking without oxidation reducing the risk of distortion.
3 arc start types: Lift, HF and Touch.HF (timed high-frequency arc start).
3 trigger modes: 2T, 4T and 4T LOG
AC waveform settings favouring arc control and penetration.
E-TIG mode ensures the welder maintains the welding power regardless of the torch position relative to the workpiece (welding energy control).
MAXIMUM CONNECTIVITY
Precisely measured energy input.
Traceability of all weld beads in accordance with EN 3834 standard.
Welding accessories calibration mode (refines energy calculation).
Connectable via an optional kit (037960) for use on a robot.
User mode to share the product with multiple welders.
Free online tool available for interface customisation.
Save, from a USB key, user JOBs (500 max.) as well as machine configuration.
Compatible with lamellar, double button, potentiometer and Up & Down torches.
Full machine and synergy update via USB key.
Remote controls (foot pedal or manual, optional) connectable without tools.
MMA, MMA AC and Pulsed MMA modes (electrodes weldable up to Ø 8 mm).
VRD (Voltage Reduction Device) activatable to lower the no-load output voltage to < 35 V.
«FV» technology guarantees a consistently stable electric arc even in the event of variations in mains voltage (85 to 265 V), generator power supply or use of a very long power cable.
Unit supplied with:
1 Koolweld 1 cooling unit
1 earth cable LENGTH 4 M + Croco T400.70 clamp
1 TIG PRO 26B torch length 8 m.
In stock
Gys
Reference: 013803
(33 reviews)
€368.05
304,17 € tax excl.
or 4 x 92,01 €
Free delivery
2-year warranty
Technological and robust
High duty cycle: 120A at 60% and 180A at 18%
MMA, MMA Pulse and TIG Lift process
Current range: 10 to 180A
Welds steel, cast iron and stainless steel up to 10mm thick
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 4 mm
Technologies: Hot Start, Arc Force, Antisticking, P400, ADS
Power supply: 230 Volts 50/60 Hz - 16A -
Open circuit voltage: 73 V
Weight: 4.9kg - 2-year warranty
Delivered in a case with:
1x Cable with ground clamp (1.6 meters) 16mm2 (10/25 mm2 connector)
1x Cable with electrode holder (2 meters) 16mm2 (10/25 mm2 connector)
Optional: TIG torch with valve - 4m - 10/25mm2 (044425)
Save 10%
In stock
Gys
Reference: 066595
€1,003.30
€1,114.77
829,17 € tax excl.
or 4 x 250,83 €
Free delivery
2-year warranty
Generator on wheels Welds steel, stainless steel and aluminium MIG duty cycle: 115A at 60% / 90A at 100% MMA duty cycle: 104A at 60% / 80A at 100% Amperage range: 30 to 200A Combines 3 welding processes in 1 product: - MIG/MAG with gas (steel/stainless wire Ø 0.6 to 1 mm and Alu 0.8 to 1mm) - MIG/MAG without gas (flux-cored wire Ø 0.9 mm) - MMA (basic and rutile electrode up to 4 mm) with Anti-stick function 4 rollers for Ø 200 mm (5 kg) or Ø 300 mm (15kg) spool Removable 250A MAG torch (2T/4T) 3m (8mm contact tip) Digital interface and very intuitive adjustment Compatible with 9kva generator Bottle support for gas cylinder up to 4m3 Single-phase 230 V - 16 A power supply Dimensions: 77 x 79x 47 cm - 32kg IP23 rating for outdoor use Accepts long extension cables (100m)
Delivered with: 1x 250A 3m torch - (MB25) 1x 2m 16mm² ground clamp 1x 2m 16mm² electrode holder 1x 1m20 gas hose
In stock
Gys
Reference: 068698
(35 reviews)
€150.25
124,17 € tax excl.
or 3 x 50,08 €
Free delivery
2-year warranty
Essential for safety, the ALIEN XXL+ TRUE COLOR optoelectronic welding helmet protects the welder's face and eyes from UV, infrared and spatter. Fully automatic, the mask switches from the clear state to the darkened state in a fraction of a second, right from arc ignition. Supplied with a headband, it frees the welder's hands and provides all the comfort needed for welding work.
UV/IR protection level: DIN 15
Shade: adjustable from 5 to 13 – True Color technology
Classification: 1/1/1/1
Viewing area: 100 x 90 mm
Reaction time: 0.08 ms
Adjustments: sensitivity, shade, delay
Power supply: solar + 2 CR 2032 batteries
Weight: 560 g
Standards: EN 175 / EN 379
Applications
MMA: 5 to 400 A
TIG: 2 to 300 A
MIG/MAG: 5 to 400 A
Grinding mode (Grind)
Replacement protective lenses:
Outer lens 114 x 133 mm ref. 043893
Inner lens 104 x 96 mm ref. 043596
Save 10%
In stock
Gys
Reference: 036635
(8 reviews)
€277.29
€308.10
229,17 € tax excl.
or 3 x 92,43 €
Free delivery
2-year warranty
Digital interface for better readability of settings
3 welding modes: MMA, MMA pulse and TIG Lift DC
Duty cycle: 160A at 64%
Current range: 10 to 160A
Welds steel, cast iron and stainless steel up to 10mm thick
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 4 mm
Technology: Hot Start, Arc Force, Antisticking, MMA Pulse, Tig Lift, ADS
Power supply: 230 Volts 50/60 Hz - 16A -
Open circuit voltage: 72 V
Weight: 7kg - 2-year warranty
Supplied in a case with:
1x Cable with earth clamp (1.6 metres) 16mm2 (10/25 mm2 connector)
1x Cable with electrode holder (2 metres) 16mm2 (10/25 mm2 connector)
1x Shoulder strap
Gys
Reference: ZEUS
(24 reviews)
€90.75
75,00 € tax excl.
Fast delivery
2-year warranty
Welding helmet suitable for arc welding:
MMA (stick electrode) from 5 to 400 A
MIG-MAG (semi-automatic welding) from 5 to 400 A
TIG from 5 to 300 A
Adjustable shade: DIN 5 to 13; setting 5 to 8 for flame welding and 9 to 13 for arc welding.
Solar powered + 2 CR2450 batteries
Automatically switches from light shade to dark shade upon arc strike in 0.2 ms
Weight: 560 grams.
Viewing field 100 x 67 mm
Number of sensors: 4
Adjustable headband
Grinding position (Grind): the lens remains clear during grinding and cutting work.
Optical classification: 1/1/1/2
Compliant with standards EN 175 / EN 379
| Combinations | Price | |
| €95.80 | ||
| €90.75 | ||
In stock
Gys
Reference: 043466
(4 reviews)
€5.54
4,58 € tax excl.
Fast delivery
2-year warranty
This sweatband is compatible with GYS welding helmets featuring the following headband models:
- Multifit
- Ergofit
- Multi
- Simple
Save 20%
Supplier stock
Gys
Reference: 032231
(3 reviews)
€422.49
€528.12
349,17 € tax excl.
or 4 x 105,62 €
Free delivery
2-year warranty
Ideal for craftsmen or home users
Welds steel, stainless steel and aluminum occasionally
Duty cycle: 120A@20% - 40°C
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (solid wire Ø 0.6 to 0.8 mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 mm)
- MMA (electrode Ø 1.6 to 2.5 mm) with Antisticking function
2-roller wire feed for spool Ø 100 mm (1 kg)
Fixed MAG torch 120A, 2.20m
Very intuitive interface and settings
Very lightweight, easily portable
Single-phase power supply 230 V - 16 A
Dimensions: 34 x 16 x 31 cm - 7.2 kg
Delivered with:
- 1 ground clamp (cable 1.6 m / 16 mm2)
- 1 electrode holder (cable 1.6 m / 16 mm2)
- 1 accessories bag (Contact tip 0.9mm, Gas nozzle, Tightening wrench, Gas hose 1m, clamps)
Supplier stock
Gys
Reference: 032248
(7 reviews)
€529.38
437,50 € tax excl.
or 4 x 132,35 €
Free delivery
2-year warranty
Ideal for craftsmen or home users
Welds steel, stainless steel and aluminum occasionally
Duty cycle: 140A@15% - 40°C
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (solid wire Ø 0.6 to 0.8 mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 mm)
- MMA (electrode Ø 1.6 to 2.5 mm) with Antisticking function
2-roller wire feed for spool Ø 100 mm (1 kg) or Ø 200 mm (5 kg)
Removable MAG torch 150A, 2.20m
Very intuitive interface and settings
Compatible with 8 kVA generator
Single-phase power supply 230 V - 16 A
Dimensions: 40 x 20 x 33 cm - 15 kg
Delivered with:
- 1 ground clamp (cable 1.6 m / 16 mm2)
- 1 electrode holder (cable 1.6 m / 16 mm2)
- 1 accessories bag (Contact tip 0.9mm, Gas nozzle, Tightening wrench, Gas hose 1m with 2 clamps)
In stock
Gys
Reference: 064201
€39.83
32,92 € tax excl.
Fast delivery
2-year warranty
Foldable pocket mask for MMA welding
Inactive glass protection rating DIN 11.
Supplied with 2 protective lenses.
Supplier stock
Gys
Reference: 065093
(5 reviews)
€1,361.25
1 125,00 € tax excl.
or 4 x 340,31 €
Free delivery
2-year warranty
Welds steel, stainless steel and aluminium from 0.6 to 6mm in all positions
MIG duty cycle: 130A at 60% / 110A at 100%
MMA duty cycle: 110A at 60% / 90A at 100%
TIG duty cycle: 135A at 60% / 115A at 100%
Current range: 20 to 200A - Voltage: 76V
Combines 4 welding processes in 1 unit:
- MIG/MAG with gas (steel/stainless wire Ø 0.6/0.8 to 1.6 mm and Alu 0.8 to 1.6mm)
- MIG/MAG gasless (flux-cored wire Ø 0.9 to 1.2 mm)
- TIG Lift DC current - Lift Arc TIG starting
- MMA (basic and rutile electrodes up to 5 mm)
2 drive rolls for spool Ø 100 mm (1 kg) or Ø 200 mm (5kg)
Removable MAG torch 250A (2T/4T) 3m (8mm contact tip)
Digital interface and very intuitive adjustment
Compatible with 9 kVA generator
Single-phase 230 V - 16 A power supply
Dimensions: 25 x 45 x 35 cm - 16kg
IP21 rating
Supplied with:
1 x 250 A steel torch 3m MB25
1 x 200 A earth clamp 2.5m
1 x MMA electrode holder 2m
1x 0.8/1 mm drive rolls
TIG torch optional
Supplier stock
Gys
Reference: 074996
€2,571.25
2 125,00 € tax excl.
or 4 x 642,81 €
Free delivery
2-year warranty
Welds steel, stainless steel and aluminium from 0.6 to 6mm in all positions
MIG duty cycle: 150A at 60% / 130A at 100%
MMA duty cycle: 150A at 60% / 130A at 100%
TIG duty cycle: 150A at 60% / 130A at 100%
Current range: 20 to 250A - Voltage: 76V
Combines 4 welding processes in 1 product:
- MIG/MAG with gas (steel/stainless steel wire Ø 0.6 to 1.2 mm and aluminium Ø 0.9 to 1.2 mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- TIG Lift DC current - Lift TIG ignition
- MMA (basic and rutile electrode up to 5 mm)
4 rollers for Ø 200 mm (5 kg) or Ø 300 mm (15 kg) spools
Removable EURO 250A 3m STEEL MIG torch (1.2 mm contact tip)
Digital interface with very intuitive adjustment
Compatible with 9 kVA generator and 100m extension lead
Cylinder support included
Single-phase 230 V - 16 A power supply
Dimensions: 75 x 45 x 80 cm - 45 kg
IP23S rating for outdoor use
Supplied with:
1 x 250 A 3m MB25 torch
1 x 3m earth clamp
2x 0.8-1.0 rollers
Save 10%
In stock
Gys
Reference: 079250
€1,547.80
€1,719.77
1 279,17 € tax excl.
or 4 x 386,95 €
Free delivery
2-year warranty
Ideal for locksmiths and maintenance workshops
Welds steel, stainless steel and aluminium
MIG duty cycle: 240A at 60% / 200A at 100%
MMA duty cycle: 220A at 60% / 180A at 100%
Current range: 40 to 300A
Combines 3 welding processes in 1 unit:
- MIG/MAG with gas (steel/stainless wire Ø 0.6/0.8 to 1.2 mm and Alu 0.8 to 1mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- MMA (basic and rutile electrode up to 6 mm)
4 rollers for Ø 200 mm (5 kg) or Ø 300 mm (15kg) spool
Removable 250A MAG torch (2T/4T) 3m long (8mm contact tip)
Digital interface with very intuitive settings
Compatible with 10kVA generator
Gas cylinder holder for cylinders up to 4m3
Three-phase power supply 400 V - 16 A
Dimensions: 77 x 79x 47 cm - 44kg
IP21 rating
Delivered with:
1 x 360 A 4m MB36 torch
1 x 400 Amp 4m ground clamp
1x User manual
2x 1.0/1.2 mm rollers
Save 5%
Supplier stock
Gys
Reference: 075016
(1 review)
€2,480.49
€2,611.05
2 050,00 € tax excl.
or 4 x 620,12 €
Free delivery
2-year warranty
Intelligent 4-in-1 three-phase welding machine
MIG duty cycle: 230A at 60% / 220A at 100%
MMA duty cycle: 230A at 60% / 200A at 100%
TIG duty cycle: 240A at 60% / 220A at 100%
Current range: 15 to 250A - Voltage: 69V
Combines 4 welding processes in 1 machine:
- MIG/MAG with gas (steel/stainless wire Ø 0.6 to 1.2 mm and aluminum 0.8 to 1.2 mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.6 mm)
- TIG Lift DC current - TIG Lift ignition
- MMA (basic and rutile electrode up to 5 mm)
4-roll wire feeder for Ø 200 mm (5 kg) or Ø 300 mm (15 kg) spools
Removable EURO 250A 3m STEEL MIG torch (1.2 mm contact tip)
Digital interface with highly intuitive adjustment
Compatible with 9 kVA generator and 100 m extension cord
Gas cylinder support included
Three-phase 400 V - 16 A power supply
Dimensions: 75 x 45 x 80 cm - 45 kg
IP23S classification for outdoor use
Supplied with:
1 x 250 A 3m MB25 torch
1 x 3m ground clamp
1x User manual
2x 1/1.2 drive rolls
TIG torch optional
In stock
Gys
Reference: 083615
€604.00
499,17 € tax excl.
or 4 x 151,00 €
Free delivery
2-year warranty
Processes: MMA / MMA Pulse / TIG Lift
Maximum current: 200 A
Welding of steel, stainless steel, cast iron (up to 10 mm)
Flexible Voltage technology (85–265 V): stable arc even on extension cord
Activatable VRD: enhanced safety
Integrated features: Hot Start, Arc Force, Antisticking, DownSlope
Generator compatible
Overvoltage protection (PROTEC 400)
Use on extension cord up to 100 m
Included:
3 m cables – 25 mm²
TIG 17 valve torch
Supplier stock
Gys
Reference: 081031
€2,112.45
1 745,83 € tax excl.
or 4 x 528,11 €
Free delivery
2-year warranty
Ideal for locksmiths and maintenance workshops
Welds steel, stainless steel and aluminum
MIG duty cycle: 400A at 60% / 240A at 100%
MMA duty cycle: 400A at 60% / 240A at 100%
Amperage range: 40 to 400A
Combines 3 welding processes in 1 unit:
- MIG/MAG with gas (steel/stainless wire Ø 0.6/0.8 to 1.6 mm and Alu 0.8 to 1.6 mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- MMA (basic and rutile electrode up to 6 mm) +
4 drive rolls for Ø 200 mm spool (5 kg) or Ø 300 mm (15 kg)
Removable MAG torch 250A (2T/4T) 3 m (8 mm contact tip)
Digital interface with very intuitive adjustment
Compatible with 10 kVA generator
Gas cylinder support for cylinders up to 4 m³
Three-phase power supply 400 V - 16 A
Dimensions: 77 x 79 x 47 cm - 48 kg
IP21 rating
Supplied with:
1x MIG 36 torch - 4 meters
1x 400A ground clamp - 4 meters (35/50 mm connector)
1x User manual
2x drive rolls 1.0/1.2 mm
In stock
Gys
Reference: 088696
€214.80
177,52 € tax excl.
or 3 x 71,60 €
Free delivery
2-year warranty
SPACEVIEW 3/5-13G AZUR TRUE COLOR XXL WELDING MASK
In stock
Gys
Reference: 087583
€115.95
95,83 € tax excl.
Fast delivery
2-year warranty
TIG 17 V Torch – Air – 4 m – Connector 10/25 – GYS087583
Length 4 m. Quarter-turn connector 10/25.
Duty cycle at 60%: 140 A DC and 125 A AC.
Usable tungsten electrodes: up to 2.4 mm.
This GYS TIG torch comes with an accessories kit including:
1 nozzle (N7)
1 collet body (Ø2.4)
1 collet (Ø2.4)
1 back cap (long)
1 WR2 AC/DC tungsten electrode (Ø2.4)
A recognised French manufacturer, GYS is one of the benchmark brands in welding and workshop equipment. The GYS welder covers all processes — MMA, MIG-MAG, TIG — from the compact model for home users to the professional generator. Discover our GYS catalogue and our advice for choosing the welder suited to your work.
GYS, a French welding brand
GYS designs and manufactures welding, battery charging, and automotive repair equipment. The brand has established itself through reliable, easy-to-use Inverter welders with a good value for money. The GYS welder is used in both professional workshops and by occasional users, which explains its popularity in France and internationally.
GYS MMA welders
For stick welding, the GYS MMA welder wins over users with its compactness and robustness. Light and portable, it welds steel, stainless steel, and cast iron with the classic welding aids (Hot Start, Arc Force, Anti-Sticking) that make it easy to get started. It is an ideal choice for repair work, ironwork, and on-site interventions.
GYS MIG-MAG welders
The GYS MIG welder is aimed at those seeking productivity and finish quality. The brand offers semi-automatic MIG-MAG models, often synergic, which automatically adjust parameters according to the metal and wire diameter. Some models also weld with flux-cored wire without gas, for versatility both in the workshop and outdoors.
GYS TIG welders
For precision and finish quality, the GYS TIG welder offers advanced functions: HF ignition, pulsed current, and for AC/DC models, aluminium welding. The GYS TIG welder is suited to sheet metal finishing, stainless steel, and demanding work. The range covers everything from the workshop model to the professional multifunction generator.
Automotive repair and multi-process
GYS is also very present in automotive repair, with dent removal solutions and welders adapted for bodywork. The brand also offers multi-process welders capable of combining several welding modes in a single unit, practical for versatile workshops.
Choosing the right GYS welder
Choosing a GYS welder depends on your process (MMA, MIG, TIG), the maximum current according to the thickness to be welded, and the duty cycle for endurance. Also consider consumables and accessories: an auto-darkening welding helmet, welding gloves, and a welder trolley are useful additions to your equipment.
The GYS ranges
The GYS range is organised into several levels. Entry-level models target home users and occasional use: compact, affordable, and easy to get started with. Intermediate and professional ranges offer more power, a better duty cycle, and advanced functions (synergy, pulsed current, multi-process). This segmentation makes it possible to find a GYS welder genuinely suited to your level of use, without overpaying for unnecessary functions or undersizing the unit.
Battery charging and jump starting
Beyond welding, GYS is also recognised for its battery chargers and jump starters, widely used in garages and automotive workshops. This dual expertise (welding and energy) explains the brand's place in the repair world. For a versatile workshop, this is an advantage: there is brand consistency between the GYS welder, the charging solutions, and the bodywork equipment, with matching consumables and support.
GYS, a reassuring choice
Choosing GYS means opting for a widely distributed brand whose parts and consumables are easy to find and whose documentation is extensive. For a first welder as well as for a workshop upgrade, this availability is an asset: you can quickly find a compatible contact tip, drive rolls, or a torch. Combined with a good value for money and a range covering all processes, this accessibility explains why the GYS welder is among the most sought-after references, from the demanding DIY enthusiast to the professional. When needed, finding a part or advice for a GYS welder remains straightforward, which limits downtime and secures your activity over the long term.
Our recommendation
For versatile use, a mid-range GYS Inverter welder offers the best balance between performance, simplicity, and budget. First identify your main process, then the required current. Browse our GYS catalogue and compare MMA, MIG-MAG, and TIG models to find the welder that will reliably support your projects over the long term.
Frequently asked questions
Are GYS welders good quality?
GYS is a French manufacturer renowned for its reliable Inverter welders and good value for money. The brand equips both professionals and home users, across all processes (MMA, MIG-MAG, TIG), which explains its lasting popularity.
What processes does the GYS brand cover?
GYS offers welders for all processes: MMA (stick electrode), MIG-MAG (semi-automatic), and TIG (DC or AC/DC for aluminium). The brand is also present in automotive repair and offers multi-process welders.
Which GYS welder should you choose as a beginner?
For beginners, an entry-level GYS Inverter MMA welder or a synergic MIG-MAG welder is ideal: simple, lightweight, and equipped with welding aids. Aim for a current range of 130 to 160 A for common repair and ironwork tasks.
Is GYS a French brand?
Yes, GYS is a French manufacturer that designs welding, battery charging, and automotive repair equipment, distributed in France and internationally.