Refine your search
By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.
Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.
View as
In stock
Gys
Reference: 082328
€9.62
7,95 € tax excl.
Fast delivery
2-year warranty
Pack of 10 Stainless Steel 308L electrodes - D2.5 mm - L 300mm
Welds stainless steel 308L
Electrode diameter: 2.5 mm
Weldable thickness: 2.5 mm
Welding power to set: 40 - 80A
Multiple positions (except downhill)
Clean, attractive weld bead
Good slag detachment
Connect the electrode holder to the + terminal of the machine
Arc striking from 60V
Classification:
EN 14343-A : W 19 9 L
AWS 5.9: ER308L
In stock
Gys
Reference: 084452BLIS
€16.03
13,25 € tax excl.
Fast delivery
2-year warranty
Welds steel
Length: 350mm
Electrode diameter: 4 mm
Thickness to weld: over 8 mm
Welding power setting: 150-160 Amp
Easy to use for striking and re-striking
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - of the welder
Classification:
AWS A 5.1: E6013
EN ISO 2560-A: E 420 RC 11
In stock
Gys
Reference: 084353BLIS
€3.98
3,29 € tax excl.
Fast delivery
2-year warranty
Welds steel
Length: 350mm
Electrode diameter: 4 mm
Weldable thickness: over 8 mm
Welding power setting: 150-160 Amp
Easy arc striking and re-striking
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - terminal of the machine
Classification:
AWS A 5.1: E6013
EN ISO 2560-A: E 420 RC 11
In stock
Gys
Reference: 084445BLIS
€11.05
9,13 € tax excl.
Fast delivery
2-year warranty
Welds steel
Length: 350 mm
Electrode diameter: 3.2 mm
Thickness to weld: 5 to 8 mm
Welding power setting: 115 A
Easy to strike and re-strike
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - terminal of the welder
Classification:
AWS A 5.1: E6013
EN ISO 2560-A: E 420 RC 11
In stock
Gys
Reference: 084346BLIS
€3.98
3,29 € tax excl.
Fast delivery
2-year warranty
Welds steel
Length: 350mm
Electrode diameter: 3.2 mm
Welding thickness: 5 to 8 mm
Welding power setting: 115A
Easy to use for striking and re-striking
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - terminal of the welder
Classification:
AWS A 5.1: E6013
EN ISO 2560-A: E 420 RC 11
In stock
Gys
Reference: 084438BLIS
€8.57
7,08 € tax excl.
Fast delivery
2-year warranty
Welds steel
Length: 350mm
Electrode diameter: 2.5 mm
Thickness to weld: 2.5 to 6 mm
Welding power setting: 80Amp
Easy to use for striking and re-striking
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - terminal of the welder
Classification:
AWS A 5.1 : E6013
EN ISO 2560-A : E 420 RC 11
In stock
Gys
Reference: 084339BLIS
€3.42
2,83 € tax excl.
Fast delivery
2-year warranty
Welds steel
Length: 350mm
Electrode diameter: 2.5 mm
Welding thickness: 2.5 to 6 mm
Welding power adjustment: 80A
Easy to strike and re-strike
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - terminal of the welder
Classification:
AWS A 5.1 : E6013
EN ISO 2560-A : E 420 RC 11
In stock
Gys
Reference: 084421BLIS
€7.31
6,04 € tax excl.
Fast delivery
2-year warranty
Welds steel
Length: 350mm
Electrode diameter: 2 mm
Welding thickness: 1.5 to 3 mm
Welding power setting: 55Amp
Easy to use for striking and re-striking
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - terminal of the welder
Classification:
AWS A 5.1: E6013
EN ISO 2560-A: E 420 RC 11
In stock
Gys
Reference: 084322BLIS
€3.98
3,29 € tax excl.
Fast delivery
2-year warranty
Welds steel
Length: 350mm
Electrode diameter: 2 mm
Thickness to weld: 1.5 to 3 mm
Welding power setting: 55A
Easy to use for striking and re-striking
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - terminal of the machine
Classification:
AWS A 5.1: E6013
EN ISO 2560-A: E 420 RC 11
In stock
Gys
Reference: 084414BLIS
€9.03
7,46 € tax excl.
Fast delivery
2-year warranty
Welds steel
Length: 300mm
Electrode diameter: 1.6 mm
Weldable thickness: 1.5 mm
Welding power setting: 40Amp
Easy to use for striking and re-striking
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - terminal of the machine
Classification:
AWS A 5.1 : E6013
EN ISO 2560-A : E 420 RC 11
In stock
Gys
Reference: 084315BLIS
€4.54
3,75 € tax excl.
Fast delivery
2-year warranty
Welds steel
Length: 300mm
Electrode diameter: 1.6 mm
Welding thickness: 1.5 mm
Welding power setting: 40A
Easy to strike and re-strike
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - terminal of the welding machine
Classification:
AWS A 5.1: E6013
EN ISO 2560-A: E 420 RC 11
In stock
Gys
Reference: 081468
€48.40
40,00 € tax excl.
Fast delivery
2-year warranty
Ideal for difficult-to-weld steels
Operating temperature of 1000°C
Electrode diameter: 3.2 mm
Thickness to weld: 3.2 mm
Welding power to set: 40 - 80 Amp
Length 300 mm
All-position use
Connect the electrode holder to the + of the welder
Arc starting from 50V
Classification:
EN ISO 3581-A: E 29 9 R
AWS 5.4: E 312-16
In stock
Gys
Reference: 081475
€49.40
40,83 € tax excl.
Fast delivery
2-year warranty
Ideal for steels with difficult weldability
Operating temperature of 1000°C
Electrode diameter: 2.5 mm
Weldable thickness: 2.5 mm
Welding power setting: 40 - 80 Amp
Length 300 mm
All-position use
Connect the electrode holder to the + terminal of the machine
Arc striking from 50V
Classification:
EN ISO 3581-A : E 29 9 R
AWS 5.4: E 312-16
In stock
Gys
Reference: 073692BLIS
€9.83
8,12 € tax excl.
Fast delivery
2-year warranty
Pack of 14 Stainless Steel 308L electrodes - D2.0 mm - L 300mm
Welds stainless steel 308L
Electrode diameter: 2 mm
Thickness to weld: 2 mm
Welding power to set: 40 - 80A
Multiple positions (except downward)
Clean bead appearance
Good slag detachment
Connect the electrode holder to the + of the machine
Arc striking from 60V
Classification:
EN 14343-A : W 19 9 L
AWS 5.9: ER308L
In stock
Gys
Reference: 081482BLIS
€39.33
32,50 € tax excl.
Fast delivery
2-year warranty
Pack of 25 Stainless Steel 316L Electrodes - D3.2 mm - L 300mm
Welds stainless steel 316L/308L/304L
Electrode diameter: 3.2 mm
Thickness to weld: 3.2 mm
Welding power setting: 40 to 80 Amp
Multiple positions (except downward)
Fine appearance bead
Good slag detachment
Connect the electrode holder to the + of the machine
Arc starting from 50V
Classification:
EN 1600 : 19123 LR12
AWS 5.4: E 316L-16
In stock
Gys
Reference: 082342BLIS
€12.05
9,96 € tax excl.
Fast delivery
2-year warranty
Pack of 8 Stainless Steel 316L Electrodes - D3.2 mm - L 300mm
Welds stainless steel 316L/308L/304L
Electrode diameter: 3.2 mm
Thickness to weld: 3.2 mm
Welding power setting: 40 to 80 Amp
Multiple positions (except downward)
Good-looking bead
Good slag detachment
Connect the electrode holder to the + of the welder
Arc striking from 50V
Classification:
EN 1600 : 19123 LR12
AWS 5.4: E 316L-16
In stock
Gys
Reference: 081499BLIS
€24.20
20,00 € tax excl.
Fast delivery
2-year warranty
Pack of 30 stainless steel 316L electrodes - D2.5 mm - L 300mm
Welds stainless steel 316L/308L/304L
Electrode diameter: 2.5 mm
Welding thickness: 2.5 mm
Welding power setting: 40 to 80 Amp
Multiple positions (except downward)
Fine-looking bead
Good slag release
Connect the electrode holder to the + terminal of the welder
Arc striking from 50V
Classification:
EN 1600: 19123 LR12
AWS 5.4: E 316L-16
In stock
Gys
Reference: 082335BLIS
€8.98
7,42 € tax excl.
Fast delivery
2-year warranty
Pack of 10 Stainless Steel 316L Electrodes - D2.5 mm - L 300mm
Welds stainless steel 316L/308L/304L
Electrode diameter: 2.5 mm
Thickness to weld: 2.5 mm
Welding power setting: 40 to 80 Amp
Multiple positions (except downward)
Fine bead appearance
Good slag detachment
Connect the electrode holder to the + of the welder
Arc striking from 50V
Classification:
EN 1600 : 19123 LR12
AWS 5.4: E 316L-16
In stock
Gys
Reference: 073708
€7.56
6,25 € tax excl.
Fast delivery
2-year warranty
Aluminum electrodes - D 2.5 mm - L 350 mm
Welds aluminum parts and alloys
5% silicon content
Electrode diameter: 2.5 mm
Weldable thickness: 2.5 mm
Welding power setting: 90 Amp
Ideal for the automotive, marine, chemical industries…
Connect the electrode holder to the + terminal of the machine
Arc striking from 60V
In stock
Gys
Reference: 083349BLIS
€30.20
24,96 € tax excl.
Fast delivery
2-year warranty
Cast Iron Electrodes X9 - L 350mm
Welds cast iron, nodular cast iron and assembly with steel
Electrode diameter: 3.2
Welding thickness: 3.2
Welding power setting: 50 to 90 Amp
Very resistant to cracking
Ideal for repairing casings, engine blocks, casting defects...
Connect the electrode holder to the + terminal of the welder
Arc striking from 40V
Classification:
AWS 5.15 : E Ni Fe CI
EN ISO 1071 : EC NiFe-CI3
DIN 8573 : E Ni Fe BG 13
In stock
Gys
Reference: 083332BLIS
€27.18
22,46 € tax excl.
Fast delivery
2-year warranty
Cast Iron Electrodes X12 - L 350mm
Welds cast iron, ductile iron and assemblies with steel
Electrode diameter: 2.5
Thickness to weld: 2.5
Welding power setting: 50 to 90 Amp
Highly resistant to cracking
Ideal for repairing crankcases, engine blocks, casting defects...
Connect the electrode holder to the + terminal of the machine
Arc striking from 40V
Classification:
AWS 5.15 : E Ni Fe CI
EN ISO 1071 : EC NiFe-CI3
DIN 8573 : E Ni Fe BG 13
In stock
Soudexpert
Reference: E7018405
€29.25
24,17 € tax excl.
Fast delivery
2-year warranty
BASIC STEEL ELECTRODE E7018
Diameter: 4.0 mm
Rod length: 400 mm
5 kg box
Arc striking from 70V - Direct current. Positive (+) polarity at electrode
Standards: AWS A 5.1: E7018-1
For welding:
- General-purpose structural steels
- Shipbuilding plates
- Boiler and pressure vessel steels
- High yield strength steels
- Heat-resistant steels
- Cold-resistant steels
Applications:
- Heavy structural steelwork
- Frames
- Marine
- Pressure vessels
In stock
Soudexpert
Reference: E7018325
€30.25
25,00 € tax excl.
Fast delivery
2-year warranty
BASIC STEEL electrode E7018
Diameter: 3.2 mm
Rod length: 350 mm
5 kg carton
Strike from 70V - Direct current. Positive (+) polarity at the electrode
Standards: AWS A 5.1: E7018-1
For welding:
- General-purpose structural steels
- Naval plates
- Steels for boilers and pressure vessels
- High yield strength steels
- Heat-resistant steels
- Cold-resistant steels
Applications:
- Heavy steel structures
- Frames
- Naval
- Pressure vessels
In stock
Soudexpert
Reference: E7018255
€32.27
26,67 € tax excl.
Fast delivery
2-year warranty
BASIC STEEL Electrode E7018
Diameter: 2.5 mm
Rod length: 350 mm
5 kg carton
Arc start from 70V - Direct current. Polarity (+) at electrode
Standards: AWS A 5.1: E7018-1
For welding:
- General construction steels
- Naval plates
- Boiler and pressure vessel steels
- High yield strength steels
- Heat-resistant steels
- Cold-resistant steels
Applications:
- Heavy structural steelwork
- Frames
- Naval
- Pressure vessels
In stock
Soudexpert
Reference: E6013405
€17.55
€29.25
14,50 € tax excl.
Fast delivery
2-year warranty
Universal rutile steel electrode STEEL CURRENT E6013
Diameter: 4 mm
Rod length: 400 mm
Box of 5 kg
5kg equals +/- 105 rods
Ignition from 40V - Direct current. Negative (-) polarity at the electrode
Standards: AWS A 5.1: E 6013
Applications:
- Metal construction
- Piping
- Locksmithing
- Sheet metal work
- Steel framework
In stock
Soudexpert
Reference: E6013325
€17.55
€29.25
14,50 € tax excl.
Fast delivery
2-year warranty
Universal rutile STEEL CURRENT electrode E6013
Diameter: 3.2 mm
Rod length: 350 mm
5 kg box
5 kg is equivalent to +/- 160 rods
Arc ignition from 40V - Direct current. Negative (-) polarity at the electrode
Standards: AWS A 5.1: E 6013
Applications:
- Metal construction
- Pipework
- Locksmithing
- Sheet metal work
- Steel framework
In stock
Soudexpert
Reference: E6013255
€18.15
€30.25
15,00 € tax excl.
Fast delivery
2-year warranty
Universal rutile steel electrode CURRENT E6013
Diameter: 2.5 mm
Rod length: 350 mm
Box of 5 kg
5kg equals +/- 245 rods
Arc ignition from 40V - Direct current. Negative (-) polarity at the electrode
Standards: AWS A 5.1: E 6013
Applications:
- Metal construction
- Pipework
- Locksmithing
- Sheet metal work
- Steel framing
In stock
Soudexpert
Reference: E6013205
€19.36
€32.27
16,00 € tax excl.
Fast delivery
2-year warranty
Universal rutile STEEL electrode E6013
Diameter: 2 mm
Rod length: 300 mm
Carton of 5 kg
5kg equals +/- 470 rods
Arc ignition from 40V - Direct current. Negative (-) polarity at the electrode
Standards: AWS A 5.1: E 6013
Applications:
- Metal construction
- Piping
- Locksmithing
- Sheet metal work
- Steel framing
In stock
Soudexpert
Reference: E6013401
€7.86
€13.10
6,50 € tax excl.
Fast delivery
2-year warranty
Universal rutile steel electrode E6013
Diameter: 4 mm
Rod length: 400 mm
Box of 1 kg
1 kg equals +/- 21 rods
Arc start from 40V - Direct current. Negative (-) polarity at electrode
Standards: AWS A 5.1: E 6013
Applications:
- Metal construction
- Pipework
- Locksmithing
- Sheet metal work
- Steel framing
In stock
Soudexpert
Reference: E6013321
€7.86
€13.10
6,50 € tax excl.
Fast delivery
2-year warranty
Universal rutile steel electrode CURRENT E6013
Diameter: 3.2 mm
Rod length: 350 mm
1 kg box
1 kg equals +/- 32 rods
Arc start from 40V - Direct current. Negative (-) polarity at the electrode
Standards: AWS A 5.1: E 6013
Applications:
- Metal construction
- Pipework
- Locksmithing
- Sheet metal work
- Steel framework
In stock
Soudexpert
Reference: E6013251
€8.47
€14.12
7,00 € tax excl.
Fast delivery
2-year warranty
Universal rutile MILD STEEL electrode E6013
Diameter: 2.5 mm
Rod length: 350 mm
1 kg box
1 kg equals +/- 54 rods
Arc striking from 40V - Direct current. Polarity (-) at the electrode
Standards: AWS A 5.1: E 6013
Applications:
- Metal construction
- Pipework
- Locksmithing
- Sheet metal work
- Steel framework
In stock
Soudexpert
Reference: E6013201
€9.08
€15.13
7,50 € tax excl.
Fast delivery
2-year warranty
Universal rutile steel electrode STEEL CURRENT E6013
Diameter: 2 mm
Rod length: 300 mm
Carton of 1 kg
1 kg is equivalent to +/- 94 rods
Arc ignition from 40V - Direct current. Negative (-) polarity at the electrode
Standards: AWS A 5.1: E 6013
Applications:
- Metal construction
- Piping
- Locksmithing
- Sheet metal work
- Steel framing
In stock
Gys
Reference: 066748BLIS
€6.30
5,21 € tax excl.
Fast delivery
2-year warranty
Welds steel assemblies (carbon and carbon-manganese steel)
Length: 350mm
Electrode diameter: 4 mm
Material thickness to weld: over 8 mm
Welding power setting: 150A (130 to 190A)
Easy to use for striking and re-striking
Multiple positions
Strike voltage: 70V DC
Connect the electrode holder to the + terminal of the welder for root pass
Connect the electrode holder to the - terminal of the welder for fill pass
Classification:
EN ISO: 2560-A
AWS A 5.1: E 7018-1
DIN 1913: E 42 4 B 4 2 H5
In stock
Gys
Reference: 066731BLIS
€5.54
4,58 € tax excl.
Fast delivery
2-year warranty
Welds steel assemblies (carbon and carbon-manganese)
Length: 350mm
Electrode diameter: 3.2 mm
Welding thickness: 5 to 8 mm
Welding power setting: 110Amp (90 to 140A)
Easy arc striking and re-striking
Multiple positions
Arc striking voltage: 70V DC
Connect the electrode holder to the + of the unit for root pass
Connect the electrode holder to the - of the unit for fill pass
Classification:
EN ISO: 2560-A
AWS A 5.1: E 7018-1
DIN 1913: E 42 4 B 4 2 H5
In stock
Gys
Reference: 066724BLIS
€5.40
4,46 € tax excl.
Fast delivery
2-year warranty
Welds steel assemblies (carbon and carbon-manganese)
Length: 350mm
Electrode diameter: 2.5 mm
Welding thickness: 2.5 to 6 mm
Welding power setting: 80Amp (60 to 110A)
Easy arc striking and re-striking
Multiple positions
Striking voltage: 70V DC
Connect the electrode holder to the + of the machine for root pass
Connect the electrode holder to the - of the machine for fill pass
Classification:
EN ISO : 2560-A
AWS A 5.1: E 7018-1
DIN 1913: E 42 4 B 4 2 H5
In stock
Gys
Reference: 066717BLIS
€5.54
4,58 € tax excl.
Fast delivery
2-year warranty
Welds steel assemblies (carbon and carbon-manganese)
Length: 300mm
Electrode diameter: 2 mm
Weldable thickness: 1.5 to 3 mm
Welding power setting: 45A (20 to 50A)
Easy to strike and re-strike
Multiple positions
Ignition voltage: 70V DC
Connect the electrode holder to the + terminal for root pass
Connect the electrode holder to the - terminal for fill pass
Classification:
EN ISO: 2560-A
AWS A 5.1: E 7018-1
DIN 1913: E 42 4 B 4 2 H5
In stock
Magmaweld
Reference: ESR1132K1
€12.04
€15.05
9,95 € tax excl.
Fast delivery
2-year warranty
1 kg pack - 32 rods Ø 3.2mm
Arc striking from 40V - Direct current. Negative (-) polarity at the electrode.
Classification:
In stock
Magmaweld
Reference: ESR1132K5
€27.83
€30.93
23,00 € tax excl.
Fast delivery
2-year warranty
5 kg pack - 165 rods Ø 3.2mm
Easy arc striking and re-striking
Good weldability in all positions
Flat slightly convex beads and easy slag removal
Excellent bead appearance
Arc striking from 40V - Direct current. Negative (-) polarity at the electrode.
Classification:
AWS A 5.1 : E6013
EN ISO 2560-A : E 420 RC 11
Magmaweld
Reference: ESR1125K1
€10.29
€12.86
8,50 € tax excl.
Fast delivery
2-year warranty
1 kg box - 54 rods Ø 2.5 mm
Easy arc striking and re-striking
Good weldability in all positions
Flat, slightly convex beads and easy slag removal
Excellent bead appearance
Arc striking from 40V - Direct current. Negative (-) polarity at the electrode.
Classification:
AWS A 5.1 : E6013
EN ISO 2560-A : E 420 RC 11
In stock
GEKA
Reference: ELHARD 600R1KG
€19.66
16,25 € tax excl.
Fast delivery
2-year warranty
Electrode for hard-facing of construction machine parts or tools subject to heavy abrasion, high pressure or impact.
Compact deposit, machinable by grinding.
Smooth fusion, low spatter, compatible with welding machines with very low arc ignition voltage.
Example of use:
Hard-facing of dies, scrapers, buckets and bucket teeth, excavation equipment, chisels, conveyor screws, crawler chain links, cutting tools
The Ø 3.2 mm electrode pack contains 1 kg, i.e. 24 pieces, length 350 mm - welding current from 90 to 135 A
In stock
Gys
Reference: 084803
€7.87
6,50 € tax excl.
Fast delivery
2-year warranty
Aluminium Electrodes - D 3.2 mm - L 350mm
Welds aluminium parts and alloys
5% silicon content
Electrode diameter: 3.2 mm
Welding thickness: 3.2 mm
Welding power setting: 90 Amp
Ideal for the automotive, marine, chemical industry…
Connect the electrode holder to the + terminal of the welder
Arc striking from 60V
Classification:
AWS A5.3 : E4043
ISO 18273 : Al 4043 A
DIN 1732 : EL-AlSi5
In stock
Gys
Reference: 082359
€8.57
7,08 € tax excl.
Fast delivery
2-year warranty
Stainless Steel 316L Electrodes - D2 mm - L 300mm
Welds stainless steel 316L/308L/304L
Electrode diameter: 2 mm
Weldable thickness: 2 mm
Welding power setting: 40 to 70 Amp
Multiple positions (except downhill)
Fine-looking weld bead
Good slag detachment
Connect the electrode holder to the + terminal of the machine
Arc striking from 40V
Classification:
EN 1600 : 19123 LR12
AWS 5.4: E 316L-16
In stock
Weldas
Reference: 44-7110
€7.26
6,00 € tax excl.
Fast delivery
2-year warranty
Split leather electrode holder
Capacity 2.3 kg
In stock
GEKA
Reference: 4043
€99.32
82,08 € tax excl.
Fast delivery
2-year warranty
Metal case containing 2 kg of vacuum-packed aluminium electrodes.
Standard AWS A5.3 / 4043
Standard TS 9604 / EL AlSli 5
The Ø 2.5 mm electrode pack contains 112 pieces - Length 350 mm
The Ø 2.5 mm electrode pack contains 70 pieces - Length 350 mm
Before ordering these electrodes, make sure your MMA (stick) welding machine is capable of welding aluminium.
This is not possible with all machines. Please check with the manufacturer or the instruction manual in your possession before purchasing.
These rods are sold in a vacuum-sealed case: no returns will be accepted
| Combinations | Price | |
| €99.32 | ||
| €113.95 | ||
In stock
Gys
Reference: 060258
€29.24
€32.49
24,17 € tax excl.
Fast delivery
2-year warranty
Capacity 7 kg
For electrodes up to 45 cm
Maximum electrode temperature 105°C
Dimensions: 500 x 120 x 110 mm - 430g
In stock
Lincoln Electric
Reference: 511819-1
€36.20
29,92 € tax excl.
Fast delivery
2-year warranty
Lincoln BASO G basic electrodes length 350 mm - Ø 2.5 mm.
Vacuum packed.
Compliant with standards
AWS A5.1 / E7018-1 H4R
ISO 2560-A: E 42 5 B 32 H5
One pack contains approximately 60 electrodes
Trafimet
Reference: F490
€16.94
14,00 € tax excl.
Fast delivery
2-year warranty
Graphite copper-coated electrodes - pencils - operating on direct current.
| Combinations | Price | |
| €25.01 | ||
| €16.94 | ||
In stock
GEKA
Reference: ELOX R316L
€90.75
75,00 € tax excl.
Fast delivery
2-year warranty
Rutile electrodes for welding 18/8/3 type stainless steel.
Supplied in a plastic case.
Standard AWS A 5.4 - E 316-16
Standard ISO 3581-A - E 19 12 3 L R 12
The Ø 2 mm electrode pack contains 3 kg, i.e. 315 pieces, length 250 mm
The Ø 2.5 mm electrode pack contains 3 kg, i.e. 165 pieces, length 300 mm
The Ø 3.2 mm electrode pack contains 4.5 kg, i.e. 130 pieces. Length 350 mm
| Combinations | Price | |
| €100.64 | ||
| €90.75 | ||
| €95.59 | ||
In stock
GEKA
Reference: ELOX R316L
€36.15
29,88 € tax excl.
Fast delivery
2-year warranty
Rutile electrodes for welding unstabilised austenitic stainless steels of type 18/8/3.
Supplied in a plastic case.
Standard AWS A 5.4 - E 316-16
Standard ISO 3581-A - E 19 12 3 L R 12
The Ø 2 mm electrode pack contains 0.7 kg, i.e. 104 pieces. Length 250 mm
The Ø 2.5 mm electrode pack contains 1 kg, i.e. 64 pieces. Length 300 mm
The Ø 3.2 mm electrode pack contains 1 kg, i.e. 27 pieces. Length 300 mm
| Combinations | Price | |
| €36.15 | ||
| €30.76 | ||
| €25.51 | ||
In stock
Gys
Reference: ELEC-2.5-ACIER-GYS
€18.66
15,42 € tax excl.
Fast delivery
2-year warranty
GY38 Steel Rutile Electrodes - Ø 2.5mm - L 350mm
Welds steel
Electrode diameter: 2.5 mm
Material thickness: 2.5 to 6mm
Welding power setting: 80Amp
Easy arc striking and re-striking
Multiple positions
Flat, slightly convex beads
Easy slag removal
Connect the electrode holder to the - terminal of the welder
Classification:
AWS A 5.1 : E6013
EN ISO 2560-A : E 420 RC 11
| Combinations | Price | |
| €3.42 | ||
| €8.57 | ||
| €18.66 | ||
| €30.23 | ||
In stock
GEKA
Reference: ELHARD 600R
€79.65
65,83 € tax excl.
Fast delivery
2-year warranty
Electrode for use in hard hardfacing of construction machine parts or tools subject to heavy abrasion, high pressure or impact.
Compact deposit, machinable by grinding.
Smooth fusion, low spatter, usable with machines with very low arc ignition voltage.
Examples of use:
Hardfacing of dies, scrapers, buckets and bucket teeth, excavation equipment, chisels, conveyor screws, track links, cutting tools
The Ø 3.2 mm electrode pack contains 4.5 kg, i.e. 108 pieces. Length 350 mm - welding current from 90 to 135 A
The Ø 4 mm electrode pack contains 6 kg, i.e. 72 pieces. Length 450 mm - welding current from 135 to 180 A
The Ø 5 mm electrode pack contains 6 kg, i.e. 48 pieces. Length 450 mm - welding current from 180 to 230 A
| Combinations | Price | |
| €79.65 | ||
| €69.58 | ||
| €69.58 | ||
Supplier stock
GEKA
Reference: LOTUS
€9.83
8,13 € tax excl.
Fast delivery
2-year warranty
Rutile electrodes for steel welding
Supplied in a plastic case
Standard AWS A 5.1 - E 6013
Standard ISO 2560-A - E 42 0 RC11
The pack of Ø 2.5 mm electrodes contains 1 kg, i.e. 54 pieces, length 350 mm
The pack of Ø 3.2 mm electrodes contains 1 kg, i.e. 34 pieces. Length 350 mm
| Combinations | Price | |
| €9.83 | ||
| €9.48 | ||
GEKA
Reference: LOTUS
€30.05
24,83 € tax excl.
Fast delivery
2-year warranty
Rutile electrodes for welding steels
Supplied in cardboard case
AWS Standard A 5.1 - E 6013
ISO Standard 2560-A - E 42 0 RC11
The Ø 2.5 mm electrode pack contains 5 kg, i.e. 270 pieces. Length 350 mm
The Ø 3.2 mm electrode pack contains 5 kg, i.e. 170 pieces. Length 350 mm
The Ø 4 mm electrode pack contains 5 kg, i.e. 115 pieces. Length 350 mm
The Ø 5 mm electrode pack contains 5 kg, i.e. 70 pieces. Length 350 mm
| Combinations | Price | |
| €30.05 | ||
| €28.44 | ||
| €29.04 | ||
| €30.04 | ||
Supplier stock
GEKA
Reference: TEMPO B W2
€43.34
35,82 € tax excl.
Fast delivery
2-year warranty
Basic electrodes designed for welding low-alloy steels of the Corten type and all steels resistant to atmospheric corrosion (marine, industrial, rural).
Pleasant fusion, easy slag removal. Fine bead appearance.
Standard AWS A 5. - E 8018 W2 H4
Standard ISO 2560-A - E 46 Z(NICrCu) B42 H5
The Ø 2.5 mm electrode pack contains 4.5 kg, i.e. 215 pieces. Length 350 mm - Welding current from 80 to 110 A
The Ø 3.2 mm electrode pack contains 5 kg, i.e. 143 pieces. Length 350 mm - Welding current from 130 to 150 A
For better arc starting, it is recommended to bake the electrodes at 150°C before use
| Combinations | Price | |
| €43.34 | ||
| €43.56 | ||
In stock
GEKA
Reference: super 299
€47.59
39,33 € tax excl.
Fast delivery
2-year warranty
Rutile-basic electrode depositing an austenitic-ferritic steel.
Specially suited for welding dissimilar steels (steel, stainless with non-alloy steel), and materials known to be difficult to weld such as tool steels, manganese steels, cast steels, spring steels, gears, cylinder rods...
The deposited metal is particularly resistant to cracking and is also suitable as an underlay before hard facing and for facing cutting or shearing tools.
Smooth fusion, attractive bead appearance - self-releasing slag.
Electrode baking: 250°C / 2 h if necessary.
Inter-pass temperature: max 250°C
Standard AWS A 5.4 / E312-16
Standard ISO 3581-A / E29 9 R 12
Available in 1 or 5 kg cases and two diameters: 2.5 and 3.2 mm
For Ø 2.5: the 1 kg case contains 68 electrodes and the 5 kg case: 370
For Ø 3.2: the 1 kg case contains 30 electrodes and the 5 kg case: 150
| Combinations | Price | |
| €223.85 | ||
| €47.59 | ||
| €42.14 | ||
| €200.16 | ||
The coated welding electrode is the basic consumable for arc welding (MMA). Also called a welding rod, it melts to form the bead while generating protection through its coating. Discover our selection of welding electrodes in all types and diameters, for steel, stainless steel, cast iron, and more.
A welding electrode is a metal rod coated with a flux. During arc welding, the metal core melts and supplies the filler material, while the coating generates a shielding gas and slag that protect the weld pool from air. This dual function explains the simplicity of the MMA process: no gas cylinder, just a MMA machine and the right welding rod.
There are several types of welding rod, defined by their coating. Rutile electrodes are easy to use, versatile, and ideal for general work. Basic electrodes produce stronger welds, suitable for stressed structures, but require more care. Other coatings (cellulosic, stainless steel, cast iron) address specific uses. The choice depends on the metal and the weld requirements.
The welding electrode is chosen first and foremost according to the metal to be joined. For common steel, a rutile steel rod is suitable for most work. For stainless steel, a stainless steel electrode of a suitable grade is used. For cast iron, a cast iron rod with a nickel core. Every metal has its dedicated welding electrode, ensuring a strong and lasting bead.
The diameter of the arc welding electrode depends on the thickness of the workpiece and the amperage of the machine. Common diameters (1.6, 2.0, 2.5, 3.2 mm) cover the majority of needs, from thin sheets to heavy thicknesses. Useful rule of thumb: approximately 30 to 40 amps per tenth of a millimeter of diameter. An electrode suited to your machine strikes easily and melts regularly.
All welding electrodes are sensitive to moisture, which degrades the coating and causes porosity and arc instability. Store them in their original packaging, in a dry place. Electrodes in blister packs or in cases facilitate proper storage. Basic electrodes, which are particularly sensitive, sometimes require oven drying before use.
To weld well, clean the workpiece, set the amperage according to the diameter, strike by scratching the electrode, then maintain a short and regular arc length. Remove the slag after each pass with a brush and chipping hammer. These simple steps, applicable to any welding rod, determine the quality of the bead.
Choosing the right welding electrode comes down to a simple rule: the filler must be compatible with the base metal. For mild steel, a rutile electrode is sufficient in most cases. For stainless steel, an electrode of a suitable grade preserves corrosion resistance. For cast iron, a nickel-core electrode limits cracking. Using an unsuitable welding rod produces a fragile bead or one prone to corrosion: filler-metal consistency is the basis of a lasting weld.
Setting the amperage is critical with a welding electrode. Too low an amperage prevents striking and causes the electrode to stick; too high, it causes spatter and burns through thin sheets. Each electrode diameter corresponds to an amperage range specified by the manufacturer. The ideal setting produces a stable arc, a regular sound, and a well-formed bead. On a MMA machine, always test on a scrap piece before tackling the final workpiece.
Mastering the strike makes all the difference with a welding rod. Strike by scratching the electrode on the workpiece like a match, then maintain a short and constant arc length, approximately equal to the electrode diameter. An arc that is too long is unstable, causes spatter, and heats poorly; one that is too short causes the electrode to stick. With a little practice on scrap pieces, the technique becomes natural and the bead regular.
For your arc welding work, choose the welding electrode according to the metal (rutile for common steel, basic for structures, stainless steel or cast iron as needed) and the diameter suited to your machine. Keep your rods dry and maintain your arc length. Browse our selection of welding electrodes for all your assemblies.
It is a metal rod coated with a flux. During arc welding, the core melts and supplies the filler material, while the coating generates a shielding gas and slag that protect the weld pool from air. This dual function allows welding without a gas cylinder, using the MMA process.
Mainly rutile (easy to use, versatile, for general work) and basic (stronger welds, for stressed structures). There are also cellulosic, stainless steel, and cast iron coatings for specific uses. The choice depends on the metal and the requirements.
According to thickness and machine amperage: common diameters are 1.6, 2.0, 2.5, and 3.2 mm. Useful rule of thumb: approximately 30 to 40 amps per tenth of a millimeter of diameter. A suitable electrode strikes easily and melts regularly.
In a dry place, in their original packaging: moisture degrades the coating and causes porosity and arc instability. Blister pack or case packaging facilitates storage. Basic electrodes, which are more sensitive, sometimes require oven drying before use.
The best rods depend on the metal and the expected result. Rutile electrodes are easy to strike, basic ones produce stronger welds, and stainless steel or cast iron electrodes are used for specific metals.
Italy
Germany
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
