By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.
Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.
View as
In stock
Lincoln Electric
Reference: W10430-15
€63.53
52,50 € tax excl.
Fast delivery
2-year warranty
Lincoln LGS3 torch 150A - EURO connector
Available length: 3 and 4 m
Duty cycle 150 A @ 60%
Applications: Thin sheet metal and automotive
For wire Ø 0.6 to 1 mm
Supplied with a contact tip Ø 0.8 mm (M6 thread) and a conical gas nozzle Ø 12 mm.
| Combinations | Price | |
| €63.53 | ||
| €78.65 | ||
In stock
Lincoln Electric
Reference: W10430-25
€88.73
73,33 € tax excl.
Fast delivery
2-year warranty
Lincoln LGS3 250A torch - EURO connector
Available lengths: 3, 4 and 5 m
Duty cycle 230 A @ 60% (CO² gas)
For wire diameter 0.8 to 1.2 mm
Supplied with a Ø 1 mm contact tip (M6 thread), a Ø 15 mm conical gas nozzle, and a 1/1.2 liner.
| Combinations | Price | |
| €88.73 | ||
| €104.87 | ||
| €121.00 | ||
In stock
Lincoln Electric
Reference: W10430-36
€145.20
120,00 € tax excl.
Free delivery
2-year warranty
Lincoln LGS3 360G torch - EURO connector.
Available length 3 - 4 and 5 m
Duty cycle 330 A @ 60% (CO² gas)
For wire diameter 0.8 to 1.6 mm
Supplied with a contact tip Ø 1.2 mm (M8 thread) and a conical gas nozzle Ø 16 mm.
| Combinations | Price | |
| €145.20 | ||
| €159.93 | ||
| €200.65 | ||
In stock
Trafimet
Reference: ERGOPLUS-15P
€72.29
59,74 € tax excl.
Fast delivery
2-year warranty
New MIG-MAG Torch Trafimet model Ergoplus 15 Premium
The ERGOPLUS MIG torch series has been renewed, bringing significant improvements to welding performance:
- new ergonomic design with natural grip handle,
- new plastic spring flexible support,
- removable torch handle (included in all standard torch sets),
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more resistant,
- reduced swan neck temperature,
- reduced consumable utilization rate.
Consumables are compatible with most European brands.
Length 3 m and 4 m
Euro connection
Air-cooled.
Duty cycle: 150 A @ 60%
For use with Ø 0.6 to 0.9 mm welding wire
Accepts M6 threaded contact tips
Originally equipped with a liner for 0.6 / 0.9 mm wire, and a 0.8 mm contact tip.
| Combinations | Price | |
| €72.29 | ||
| €102.50 | ||
In stock
Trafimet
Reference: MA4202
€91.75
75,83 € tax excl.
Fast delivery
2-year warranty
New Trafimet MIG-MAG Torch model Ergoplus 25 Premium
The ERGOPLUS MIG torch series has been renewed, bringing significant improvements to welding performance:
- new ergonomic design with natural-grip handle,
- new flexible plastic spring support,
- removable torch handle (included in all standard torch sets),
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more resistant,
- reduced swan neck temperature,
- reduced consumable usage rate.
Consumables are compatible with most European brands.
Length 3 m and 4 m
Euro connection
Air-cooled.
Duty cycle: 220 A @ 60%
For use with welding wire Ø 0.8 to 1.2 mm
Accepts M6 threaded contact tips
factory-fitted with a 1/1.2 liner and a 1mm contact tip.
| Combinations | Price | |
| €91.75 | ||
| €124.07 | ||
| €156.44 | ||
In stock
Trafimet
Reference: ERGOPLUS-36P
€146.74
121,27 € tax excl.
Free delivery
2-year warranty
New Trafimet MIG-MAG Torch model Ergoplus 36 Premium
The ERGOPLUS MIG torch series has been renewed, bringing significant improvements to welding performance:
- new ergonomic design with natural-grip handle,
- new flexible plastic spring support,
- removable torch handle (included in all standard torch sets),
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more durable,
- reduced swan neck temperature,
- reduced consumable usage rate.
Consumables are compatible with most European brands.
Length 3 m and 4 m
Euro connection
Air-cooled.
Duty cycle 300 A @ 60%
For use with welding wire Ø 0.6 to 1.6 mm
Accepts M6 threaded contact tips
originally equipped with a 1/1.2 liner and a 1.2 mm contact tip
| Combinations | Price | |
| €146.74 | ||
| €167.23 | ||
Supplier stock
Trafimet
Reference: MA4200-030-ALU
€90.75
75,00 € tax excl.
Fast delivery
2-year warranty
New MIG-MAG Torch Trafimet model Ergoplus 15 Premium
The MIG ERGOPLUS torch series has been renewed, bringing significant improvements to welding performance:
- new ergonomic design with natural-grip handle,
- new flexible plastic spring support,
- removable torch handle (included in all standard torch sets),
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more resistant,
- reduced swan neck temperature,
- reduced consumable usage rate.
Consumables are compatible with most European brands.
Length 3 m equipped with a liner and a contact tip for aluminium wire Ø 0.8 mm
Euro connection
Air-cooled.
Duty cycle: 150 A @ 60%
Supplier stock
Trafimet
Reference: MA4202-030-ALU
€115.95
95,83 € tax excl.
Fast delivery
2-year warranty
New MIG-MAG Torch Trafimet model Ergoplus 25 Premium
The MIG ERGOPLUS torch series has been redesigned, bringing significant improvements to welding performance:
- new ergonomic design with natural-grip handle,
- new flexible spring plastic support,
- removable torch handle (included in all standard torch sets),
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more durable,
- reduced swan neck temperature,
- reduced consumable usage rate.
Consumables are compatible with most European brands.
Length 3 m fitted with a liner and a contact tip for aluminium wire Ø 1 mm
Euro connector
Air cooling.
Duty cycle: 220 A @ 60%
In stock
DECA
Reference: 010464
€75.62
€84.02
62,50 € tax excl.
Fast delivery
2-year warranty
MIG torch for DECA welding machine using flux-cored wire (gasless) suitable for the following machines:
DECASTAR 130 AC
STARFLUX 130 AC
D-MIG 230
Length 2 m
140 A @ 60%
This reference is a replacement accessory; it is not required when purchasing a new welding machine.
In stock
DECA
Reference: 010821
€45.38
€53.39
37,50 € tax excl.
Fast delivery
2-year warranty
MIG torch for DECA brand welding machine, adapted to the MIGA 215 model
Allows the use of solid wire Ø 0.6 / 0.8 mm or flux-cored wire of section Ø 0.6 to 0.9 mm
Length 2 m
110 A @ 35 %
This reference is a replacement accessory; it is not required when purchasing a new welding machine.
Supplier stock
Gys
Reference: 041486
€428.55
354,17 € tax excl.
or 4 x 107,14 €
Free delivery
2-year warranty
Spool-Gun torch for Ø 100 mm wire spool, length 4 M.
Equipped with a Ø 0.8 mm contact tip M6 thread.
Duty cycle 150 A @ 60%
Compatible with Gys welding machines:
M1 and T1 Gys auto - T1 Gys auto DV - M3 and T3 Gys auto - T3 Gys auto DV - AUTOPULSE 320-T3
HELVI
Reference: 23000133
€50.01
41,33 € tax excl.
Fast delivery
2-year warranty
Replacement torch for Fox 160 Helvi MIG welder
Length 2m
Sold without contact tip or contact tube.
In stock
Telwin
Reference: 742402
€99.83
82,50 € tax excl.
Fast delivery
2-year warranty
Telwin TW 160 replacement MIG-MAG torch, length 2 m, for the welding machine references listed below
BIMAX 132 - 140 - BIMAX 152 - BIMAX 4.165 Turbo - BIMAX 162 Turbo
TECHNOMIG 150 DUAL SYNERGIC
MAXIMA 160
In stock
HELVI
Reference: 23000132
€49.20
€61.50
40,66 € tax excl.
Fast delivery
2-year warranty
Replacement torch for Helvi FOX 165 welding machine
Length 2.7m
Supplier stock
DECA
Reference: 010470
€160.33
132,50 € tax excl.
or 3 x 53,44 €
Free delivery
2-year warranty
MIG torch for DECA brand machine suitable for models:
DECASTAR 140 - 150E and 180E.
DECAMIG 4180 E and DECAMIG 4190 E
D-MIG 350 - D-MIG 380 (if torch is fixed to the machine)
Length 2 m
160 A @ 60 %
This reference is a replacement accessory; it is not required when purchasing a new machine.
Italy
Germany
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
